wairehealth C-Detect User manual

User Guide Revision 1.0

In the event of a wearable not working, please
contact the Customer service number on
[phone]
E-mail: [e-mail]
WAIRE HEALTH LTD
Third Floor One London Square
Cross Lanes
Guildford
Surrey
GU1 1UN
Telephone: [phone]
Email: [e-mail]
Web site www.wairehealth.com

User Guide Revision 1.0
Please read all instructions carefully before use and retain for future reference.
Waire Health Ltd declare that this product conforms to the following Standards:
BS EN IEC 62368-1:2020+A11:2020.
This product is carrying the CE-Mark in accordance with the related European
Directives. Responsibility for CE-Marking of C-Detect is WAIRE HEALTH LTD,
Third Floor One London Square, Cross, Lanes, Guildford, Surrey, GU1 1UN.
Copyright Notice ©2020 Waire Health Ltd
The trade mark C-Detect belongs to Waire Health Ltd and is registered in UK
This document may not be copied, photocopied, reproduced,
translated, or reduced to any electronic medium or machine-readable form in
whole or in part, without the prior written consent of Waire Health Ltd.
All data, images and other content provided and all designs remain the property
of Waire Health Ltd.
All names and trademarks are the property of their respective owners.

Table of Contents
What‘s in the box 6
About the C-Detect 7
Getting Started
Sensor Diagram 10
Charging your C-Detect 11
Wearing the C-detect
Selecting the strap size 14
Attaching the strap to the Sensor 14
Securing the Strap to your arm 16
Turning on C-Detect 18
Bad Skin Contact 19
What is the C-Detect actually monitoring? 20
Notications and Feedback 21
Maintenance of the C-Detect 30
Understanding the information Displayed on the Waire Health App
Installing the Waire Health App on your smartphone 39
Basics: What is the C-Detect actually monitoring? 40
Notications and Feedback 42

Sensor Performance 48
Turning o Notications 48
Settings 50
Troubleshooting
What’s happening to the C-Detect? 55
What’s happening in the Waire Health App ? 56
General Info and Specications
Sensors 58
Materials 58
Battery 58
Sensor Size and Weight 59
Arm Strap Size 59
Environmental Conditions 60
Warnings 60
Disposal 60
Symbols Key 61
Return Policy and Warranty 61
Privacy 61

6
What’s in the box?
Inside your Waire C-Detect box you will nd:
- C-Detect Sensor
- Medium Arm Strap
- Large Arm Strap
- USB-C Charging Cable
- Quick-start Guide
- Antibacterial Wipes
A
A
B
B
C
C
D
D
E
E
F
F
Quickstart Guide

7
About C-Detect
C-Detect is a state of the art autonomous wearable monitor, that helps users evaluate their
general tness and wellness, and decide whether to seek medical advice.
C-Detect device is intended to highlight the presence of common signs and symptoms that
may indicate possible medical conditions such as COVID-19. C-Detect helps to reduce the
likelihood of COVID-19 spreading within the community by providing users with a visual
aid that enables quick evaluation of wellness in order to seek further medical advice from a
health care provider, self-isolate and follow local government guidelines.
C-Detect device helps to reduce the likelihood of COVID-19 spreading within the
community by supporting contact-tracing through communication with other similar
devices.
These intended purposes are achieved by the device by:
• enabling capture and feedback of health-related data (using national clinical
guidelines) for users, patients and health care providers
• focusing users, patients on their general wellness
• tracking interventions using an anonymous digital token that informs users who
may have come into contact with other users with potential symptomatic medical
conditions.
PLEASE NOTE: C-Detect is not intended for use in the diagnosis of disease or
medical conditions, or in the cure, mitigation, treatment, or prevention of disease.

8

9
Getting Started

10
Status
Light
Charging
Port
Sensors
Arm Strap
Pairing
Button
LED
Strip
ON/OFF
Button

11
Charging the C-Detect
Once fully charged, the C-Detect will have a battery life of up to 10 days.
To charge the C-Detect:
1. Insert the other end of the charging cable into the USB-C port, located at the bottom
of the sensor.
2. Plug the charging cable into a USB wall charger, and insert into the outlet.
Charging the C-Detect Sensor to full capacity takes approximately 1-2 hours. Once fully
charged, the LED strip on the font turns solid green.
PLEASE NOTE: DO NOT charge the C-Detect when the device is being worn.

12

13
Wearing the C-Detect

14
Wearing your C-Detect Sensor
Selecting the correct strap size
The C-Detect sensor comes with two sizes of adjustable arm strap, medium and large.
Once in place, this should be secured around the upper section of your arm as tightly as is
comfortable whilst maintaining good blood ow. If the strap is too tight, it can be loosened
and adjusted to suit.
Should the medium strap size not t at its most extended length, a larger strap size is pro-
vided in the box
Attaching the Strap to the Sensor
1. Pull both velcro end sections from the main elas-
ticated section of the strap.
2. With the C-Detect facing towards you, and the
velcro side of the strap facing up, feed the rst end
through the loop on the side of the sensor.

15
1.
2.
3. Secure in place by folding back the
velcro onto the main elasticated
section of the strap.
4. Now feed the other end behind the
sensor, and through the opposite
side’s loop.
5. Secure loosely in place, leaving
enough room to comfortably slip
the strap and now attached sensor,
onto your arm.

16
Securing the C-Detect to your arm
NOTE: The sensor must sit underneath the clothing and have direct contact with the skin
to operate.
1. Slip the strap and attached sensor onto your arm
and manoeuvre until in place on your upper arm.
C-Detect can be worn on either arm.
2. Pull apart the velcro section from the loose end
of the strap.

17
1.
2.
3. Tighten the strap until the sensor is secured
comfortably in place.
NOTE: Ensure the charging port is facing down
towards the oor when worn.
4. Secure the strap by folding back the velcro
section onto the main body of the strap. Do not
make the strap too tight, this should be secure
enough to ensure the sensor does not slip down
the arm, whilst maintaining good blood ow.

18
Turning on the C-Detect
Once the C-Detect is secured to your arm, you are ready to turn it on.
When turning on the C-Detect, hold down the
ON-OFF Button on the bottom of the device for
2 seconds. A small GREEN light will show on the
bottom of the device.
If the device is on your arm and in contact
with your skin, the LED Strip will glow
solid BLUE.
NOTE: If you are turning on the C-Detect before putting it on
your arm, the LED strip will glow solid BLUE and ash for 1
minute before turning o

19
Bad Skin Contact
If the C-Detect monitor is not secured on the arm
properly, the sensors will not be able to make the
good skin contact required to carry out the continuous
monitoring of vital signs.
If this occurs and is maintained for a period longer
than 10 seconds, the LED strip will ash PINK and the
device will vibrate. This will continue for 1 minute, and
then the C-Detect will turn o.
The Device should be re-tted to ensure good skin
contact and turned on again. If good skin contact is
detected, the LED strip will glow BLUE.

20
What is the C-Detect actually monitoring?
The C-Detect Sensor monitors the following vitals every 10 minutes:
Heart Rate
This is how fast your heart is pumping blood around your body, and is
measured in Beats Per Minute (BPM)
Respiratory Rate
This is how many times you breathe in and out and is measured in Breaths
Per Minute (BPM)
Temperature
This monitors the uctuations in temperature of your body, measured in
degrees
Celsius (° C)
Pulse Oximetry
This is calculating the percentage of oxygen in your blood, or blood oxygen
saturation levels (%SpO2)