Walker Edison BR18LACNS User manual

P.1
Copyright 2022, by Walker Edison Furniture Co., LLC. All rights reserved.
c
Revised 05/2022 V1
Please visit our website for the most current instructions, assembly tips, to report damage
or request parts. www.walkeredison.com
Assembly Instruction
Item #: BR18LACNS

Maintenance Guide
To maintain long term performance and easy gliding of your solid wood drawers,
we recommend applying wax to the wooden guide rails.
1. Bee's wax is recommended or Paraffin wax from a standard candle can be used.
2. Apply the wax by rubbing it on the wooden guide rails where there is wood-on-wood
contact when opening and closing the drawer. (Wax should be room temperature, do
not melt the wax onto the wood).
3. Wax should be applied every few months for the first year and then only when
needed after that to keep the drawers sliding smoothly.

P.3
Part# Description Qty
1 Top panel 01 pcs
2 Right side panel 01 pcs
3 Left side panel 01 pcs
4 Bottom panel 01 pcs
5Crossbeam of the foot 02 pcs
6
Side crossbeam of the foot
02 pcs
7 Back panel 01 pcs
8 Drawer slide 02 pcs
Part# Description
10 Drawer front
11 Left drawer side
12 Right drawer side
13 Drawer bottom
14 Drawer back
Qty
01 pcs
01 pcs
01 pcs
01 pcs
01 pcs
5
4
32
1
10
12
14
WARNING!
* Use the wall attachment device provided.
* Do not let children climb or hang on drawers, doors or shelves.
* Place the heaviest items in the lower drawers or shelves.
* Do not place Tv’s or other heavy objects on top of this product,
unless it has specifically designed to support them
* Never open more than one drawer at a time.
.
IN ORDER TO PREVENT OVER TURNING THIS PRODUCT MUST
BE USED WITH THE WALL ATTACHMENT DEVICE PROVIDED
Serious or fatal crushing injuries can occur from furniture
tipping over. To help prevent this item of furniture tipping over:
Always ensure the wall to be drilled is free from hidden electrical wires, water
and gas pipes.
An attachment device is provided with your product, however you will need to
source suitable fixings for your wall type. If in doubt, please consult a qualified
trades person
99
11
7
16 Left foot 02 pcs
17 Right foot 02 pcs
66
6
5
5
11
13
17
16
16
17
WARNING!
* Use the wall attachment device provided.
* Do not let children climb or hang on drawers, doors or shelves.
* Place the heaviest items in the lower drawers or shelves.
* Do not place Tv’s or other heavy objects on top of this product,
unless it has specifically designed to support them
* Never open more than one drawer at a time.
.
IN ORDER TO PREVENT OVER TURNING THIS PRODUCT MUST
BE USED WITH THE WALL ATTACHMENT DEVICE PROVIDED
Serious or fatal crushing injuries can occur from furniture
tipping over. T
o help prevent this item of furniture tipping over:
Always ensure the wall to be drilled is free from hidden electrical wires, water
and gas pipes.
An attachment device is provided with your product, however you will need to
source suitable fixings for your wall type. If in doubt, please consult a qualified
trades person
12
WARNING!
* Use the wall attachment device provided.
* Do not let children climb or hang on drawers, doors or shelves.
* Place the heaviest items in the lower drawers or shelves.
* Do not place Tv’s or other heavy objects on top of this product,
unless it has specifically designed to support them
* Never open more than one drawer at a time.
.
IN ORDER TO PREVENT OVER TURNING THIS PRODUCT MUST
BE USED WITH THE WALL ATTACHMENT DEVICE PROVIDED
Serious or fatal crushing injuries can occur from furniture
tipping over. To help prevent this item of furniture tipping over:
Always ensure the wall to be drilled is free from hidden electrical wires, water
and gas pipes.
An attachment device is provided with your product, however you will need to
source suitable fixings for your wall type. If in doubt, please consult a qualified
trades person
12
9999
99

8*20 mm Wood dowel
Tape measure and hammer
recommended for assembly
(not included)
Screw
A
B
C
D
E
F
G
04 pcs
36 pcs
04 pcs
36 pcs
14 pcs
02 pcs
01 pc
Wood dowel
8*30 mm
4*25mm
3,5*30mm
10*7mm Nail
3*10mm
Handles
H04 pcs
Felt
20*20 mm
Washer
I
J
02 pcs
01 pc
K01 pc
Wall anchor
6mm

Step 2Step 2
Step 1
DQty
06
Ø 3,5x30 mm
Secure parts (2) and (3) to part (1) using screw (D).
Insert wood dowel (A) into part (9).
Insert wood dowel (B) into part (2), (3), (5), (6),(11) and (12).
04
Ø 8x20 mm
Qty
32
Ø 8x30 mm
Qty
(06x)
D
D
D
D
D
D
D
3
2
1
3
B
B
B
B
2
B
B
B
B
6
BB
BB
B
B
B
B
6
6
BB
BB
BB
BB
B
B
B
B
5
5
B
B
B
B12
11
A
A
A
AA
99
99
99
A
(04x)
3
AB
Please assemble on
a clean soft surface
to avoid damage.
P.5

D
(04x)
Step 3
P.6
Step 4
Use screw (D) to attach part (16) and (17) to part (6), do this step twice.
Use screw (D) to attach parts (5) to parts (16) and (17).
(02x)
D
5
16
17
D
D
5
17
16
6
D
D
DQty
04
Ø 3,5x30 mm
DQty
02
Ø 3,5x30 mm
(2x)

Step 5
P.7
Step 6
Use screw (D) to attach parts (5) to parts (16) and (17).
Attach parts (5) e (6) in the part (4) as shown using screw (D).
(02x)
D
D
D
D
DD
D
D
D
(06x)
D
6
17
16
6
5
5
4
5
5
H
H
H
H
55
6
56
H
(04x)
17
16
16
17
Insert felt (H) into parts (16) and (17).
DQty
02
Ø 3,5x30 mm
DQty
06
Ø 3,5x30 mm
HQty
04
20x20 mm
Please assemble on
a clean soft surface
to avoid damage.

P.8
Step 7
Step 8
Attach part (4) to parts (2) and (3) with screw (D).
Fix the part (7) on the assembled structure, with the nail (E).
(06x)
D
D
D
D
D
D
D
Qty
14
E
Ø 10x7 mm
E(14x)
4
3
2
DQty
06
Ø 3,5x30 mm
D
E
EE
E
E
E
E
E
7
E
E
E
E
E
E
Name and address of
the supplier and date of
production.
Please assemble on
a clean soft surface
to avoid damage.

Step 10
P.9
Step 9
C
(04x)
Qty
04
C
Ø 4x25 mm
Attach slides (9) to parts (2) and (3) as shown using screw (C).
Insert the wood dowel (B) into the drawer slides (9).
(02x)
B
B
B
C
C
C
C
3
2
99
99
99
99
99
99
02
Ø 8x30 mm
Qty
B

Step 11
P.10
Step 12
(04x)
D
D
D
D
D10
12
11
14
13
D
D
D
D
Insert panel (13) into grooves and secure part (14) with screw (D).
Insert the handle (G) into the part (10) with the screw (F).
Secure parts (11) and (12) to part (10) using screw (D).
10
FFG
F
FG
10
G
FQty
02
Ø 3x10 mm
Qty
01
DQty
04
Ø 3,5x30 mm
D
(04x)
Please assemble on
a clean soft surface
to avoid damage.
DQty
04
Ø 3,5x30 mm

Step 13
P.11
Insert wood dowel (B) on the inside of all drawers while drawer is inside the unit.
Step 14
BB
75
lbs
20
lbs
B
02
Ø 8x30 mm
Qty
B
(02x)

Ø6mm
Back panel
Top
Top
Wall
1º 2º
Attach screw (D) into washer (I), securing
wall anchor (K), in the frame of superior
Drill your wall with a 6mm drill (not included) and
insert hardware (J), securing wall anchor (K) with
washer (I) and screw (D) in the wall.
D
I
K
D
I
J
panel unit.
Wall anchor and hardware are included with this product.
Please make sure hardware is suitable for your walls before
types of anchors.
K
I02
J01
K01
Step 15
Name and address information for the manufacturer responsible
for the anti-tip hardware and date of production can be found on
the label on the back of the furniture.
=
Qty
02
D
Ø 3,5x30 mm
P.12
=