Walker Edison BR20ELR2D User manual

P.1
Item#:BR20ELR2D
AssemblyInstructions
Please visit our websitefor the most current instructions, assemblytips, report damage,
or request parts. www.walkeredison.com
Revised 09/10/2019(L)
Walker Edison
TM
Copyright
201
9, by Walker Edison Furniture Co., LLC. All rightsreserved.

III. Drill may be needed for securing product to wall.
General Assembly Guidelines
I. Ensure that all parts and hardware are available before beginning assembly.
II. Follow each step carefully to ensure the proper assembly of this product.
21
III. Two people are recommended for ease in the assembly of this product.
I. The three main types of hardware used to assemble this product are: wood
dowels, screws and bolts.
. The provided glue is to secure wood dowels in place. When first inserting dowels,
locate the appropriate hole for the dowel, place a small amount of glue in the hole
and insert the dowel. Wipe away excess glue immediately.
In future assembly steps when dowels are necessary to attach assembly parts
together, place a small amount of glue on the end of the dowel before attaching
parts together. Wipe away excess glue immediately.
I. A Phillips head screwdriver is required for the assembly of this product .
II. Power tools should not be used to assemble this product.
Copyright
©
201
9, by Walker Edison Furniture Co., LLC. All rights reserved.
P.2

PartsList
P.3
Copyright
201
9, by Walker Edison Furniture Co., LLC. All rightsreserved.
1
2
3
4
5
6
6
7
8
8
8
8
9
10
11
12
15
13
14
16
17 17

P.4
The hardware quantities listed above are required for proper assembly.
Someextrahardware may also have been included.
8x30mm Woodendowel 14 pcs
Philipsheadscrewdriverrequiredforassembly
(notincluded)
A
Copyright
©
201
9, by Walker Edison Furniture Co., LLC. All rightsreserved.
6x35mm Cambolt 14 pcs B
15x11mm Camlock 6 pcs
C
30mm Sticker
8pcs D
6x50mm Screw
14 pcs E
4pcs F
4pcs G
3x17mm Screw 4 pcs H
J
K
4mm HexKey 1 pcs
L
Gluetube
M
Screw 12 pcs
N
Screw 24
P
Q
4x32mm
3x12mm
15x9.5mm Camlock
Plasticwedge
R
6x12mm
HardwareList
S
T
Bolt
Velcro strap
Screw
Nut
Screw
4x25mm
4x12mm
5x15mm Screw
1pc
1pc
1pc
1pc
1pc
4pcs
16 pcs
pcs
UDrawerslider
*Note: Thispiececomespreassembled for
shipping purposesand must be disassembled
tocompletethe desk assembly.
1Set

P.5
Step 1
Copyright
201
9, by Walker Edison Furniture Co., LLC. All rightsreserved.
12
BB
B
B
BB
BBB
B
B
B
16
1
Secure cam bolt (B) into parts (1,12,16) with Philips head screwdriver as per diagram.

.6
Step 2
Copyright
©
201
9, by Walker Edison Furniture Co., LLC. All rights reserved.
34
A
A
A
A
A
A
A
A
B B
A
A
A
A
A
A
7
6
6
Insert wooden dowel (A) into parts (3,4,6,7) , then secure cam bolt (B) into parts (3,4) with Philips
head screwdriver as per diagram.

Step 3
P.7
Copyright
201
9, by Walker Edison Furniture Co., LLC. All rightsreserved.
1
6
K
K
K
K
6
2
Using screw (K) attach part (6) into parts(1,2) with Philips head screwdriver .

Step 4
P.8
Copyright
201
9, by Walker Edison Furniture Co., LLC. All rightsreserved.
Sliderbracket
Sliderarm
Sliderbracket
Sliderarm
U
U
Pick up the slider arm (U) and separate the slide Runner for the following Steps. Extend
the Slide .Runner all the way forward,press the plastic release lever of the alider arm up
and pull the Slide Runner Complete out .

.9
Step 5
Copyright
©
201
9, by Walker Edison Furniture Co., LLC. All rights reserved.
UU
UU
10 9
14 13
L
L
L
L
L
L
L
L
L
L
L
L
Using screw (L) attach part (U) into parts(9,10,13,14) with Philips head screwdriver .

P.10
Step 6
Copyright
201
9, by Walker Edison Furniture Co., LLC. All rightsreserved.
L
L
L
L
L
L
L
L
L
L
L
L
U
U
U
U
34
Using screw (L) attach parts (U) into parts(3,4) with Philips head screwdriver as per diagram .