Walker Edison AF42JMGL User manual

Item # : AF42JMGL
Assembly Instructions
  
 

    P.1

Disassemble drawer slider (S) by sliding the slider arm and slider bracket apart. Depress the
small lever of the slider bracket and carefully pull the two pieces apart. Repeat this process
for both drawer sliders (S).
Secure slider arm (S) to side panel (3,5) with screw (R).

Insert wooden dowel (A) into side panel (3,4,5).
Secure cam bolt (B) to drawer front panel (8) and top panel (1).

Use wrench (N) to secure bottom panel (6) to side panel (3,4,5) with bolt (H).
Slide back panel (7) into grooves as per diagram.

Insert top panel (1) into side panel (3,5), then insert and secure cam lock (C) to side panel
(3,5) to lock it.
Use wrench (N) to secure leg (13) to part (14) with bolt (E).

Use wrench (N) to secure leg (13) and part (14) to bottom panel (6) with bolt (F) and washer (G).
For optional added stability, secure plastic wedge (L) to back panel (7) with screw (K).

Secure drawer side panel (9,10) to drawer back panel (11) with screw (J), then slide drawer
bottom panel (12) into grooves as per diagram.
Insert drawer front panel (8) into drawer side panel (9,10), then insert and secure cam lock (D)
to drawer side panel (9,10) to lock it.

Place sticker (M) over holes as per diagram.
Secure slider bracket (S) to drawer side panel (9,10) with screw (R).

Place rubber suction cup (Q) over holes as per diagram, then place glass top on top of
frame carefully.
Hold and push the drawer to reattach drawer sliders (S).