Walker Edison AFVET2DRCT User manual

.1
Assembly Instructions
Copyright
©
202
0 b
y
Walker Edison Furniture Co., LLC. All rights reserved.
lease visit our website for the most current instructions, assembly tips, report damage,
or request parts. .alkeredison.com
Revised 17/08/2020 (I)
alker Edison
TM
Item # : AFVET2DRCT

General Assembly Guidelines
. Ensure that all parts and hardware are available before beginning assembly.
. Follow each step carefully to ensure the proper assembly of this product.
1
. Two people are recommended for ease in the assembly of this product.
V. The three main types of hardware used to assemble this product are: wood
dowels, screws and bolts.
V. The provided glue is to secure wood dowels in place. When first inserting dowels,
locate the appropriate hole for the dowel, place a small amount of glue in the hole
and insert the dowel. Wipe away excess glue immediately.
In future assembly steps when dowels are necessary to attach assembly parts
together, place a small amount of glue on the end of the dowel before attaching
parts together. Wipe away excess glue immediately.
V. A hillips head screwdriver is required for the assembly of this product .
V. ower tools should not be used to assemble this product.
Copyright
©
2020
by Walker Edison Furniture Co., LLC. All rights reserved.
.2

.3
arts List
1
Copyright
©
2020
b
y
Walker Edison Furniture Co., LLC. All rights reserved.
4
5
2
2
3
3

A
B
C
pcs
8pcs
Bolt
M6x35mm
M6x20mm Bolt 4
HardwareList
The hardware quantities listed above are required for proper assembly.
Someextrahardware may also have been included.
P.4
Copyright
2020
b
y
Walker Edison Furniture Co., LLC. All rightsreserved.
Philipsheadscrewdriverrequiredforassembly
(notincluded)
D
pc
1
M4 Hexkey
pcs
Ø4x30mm Screw 4
E
pcs
Flatwasher 4

Step 1
.5
Copyright
©
2020
b
y
Walker Edison Furniture Co., LLC. All rights reserved.
4
2
2
3
A
E
3
A
A
A
Using bolt (A) attach part (4) to parts (2,3) with Hex key (E) as per diagram.

.6
Copyright
©
2020
b
y
Walker Edison Furniture Co., LLC. All rights reserved.
Step 2
2
2
3
3
A
A
A
A
E
5
Using bolt (A) attach part (5) to parts (2,3) with Hex key (E) as per diagram.

Step 3
P.7
Copyright
2020
b
y
Walker Edison Furniture Co., LLC. All rightsreserved.
2
2
5
4
1
D
D
D
D
B
C
E
Using bolt (B) attach flat washer (C) into parts (4,5) to part (1) with Hex key (E) ,
then using bolt (D) attach part (2) to part (1) with Philips head screwdriver as per diagram.

Step 4
P.8
Copyright
2020
b
y
Walker Edison Furniture Co., LLC. All rightsreserved.
If you need to remove the drawer, please pull the drawer forward with one hand, and press up the
plastic stopper with another hand ,then you can take drawer out easily as per diagram. Don’t be
too fast to avoid getting caught.

.9
Copyright
©
2020
b
y
Walker Edison Furniture Co., LLC. All rights reserved.
Step 5
Final Assembly