Walker Edison D31S29 User manual

Assembly Diagram
1
*Note: These parts come preassembled for shipping purposes and must be disassembled for assembly
1
wrench
A
B
C
D
E
F
G
H*
I*
J
K
L
M
N
small screws 8
medium bolts 12
4
2
2
L = 1, R = 1
1
1
21
2
1
8
rubber suction
cups
desk feet
keyboard tray
bracket
keyboard tray
arm
keyboard tray
support frame
desk glass
keyboard tray
glass
desk leg cross bar
cross bar for
frame keyboard
side
keyboard tray
frame
Component List
Model No.

N
2
Step 1
Assembly Diagram Model No. D51Z29Model No. D51L29
Screw desk feet (G) into the bottom
of desk legs (N).
Step 2
Take legs (F) and screw in the medium bolts (C) into and through the legs (F) and into the upper
cross bars (N). Now take the cross bar (M) and attach it to legs (F) using medium bolts (C).
N
F F
DDDD
F
F
D
D
D
D
M
Model No.

Assembly Diagram
3
Step 4
Step 7
Disassemble the keyboard tray brackets (H) and the keyboard tray arm (I)
by pressing down the small lever and pulling up.
H
I
Secure rubber suction cups (E) to cross bars (P) by placing the small ends into the holes on the top of
the desk frame.
Screw in keyboard support tray frame (J) between left upper cross bars (N) using medium bolts (C).
Step 5
N
N
M
Step 6
Attach keyboard tray arm (I) to keyboard support tray frame (J) using small screws (B).
Model No.

Assembly Diagram
4
Push down on small
lever to allow keyboard
bracket to slide along
keyboard arm.
Step 9
Place rubber suction cups (E) on keyboard tray frame (Q) and place keyboard tray glass (K) on top of
the rubber suction cups. Now take the keyboard tray and slide it into the keyboard tray arm (I). Find
desk glass (G). Place the glass on top of the desk frame according to the above illustration.
To construct the keyboard tray you need to take the keyboard tray brackets (H) and secure them to the
keyboard frame (L) using small screws (B) as shown in the illustration.
*Note: Ensure the open end of keyboard tray arm (I) faces front side of desk.
Step 8
L
G
K
Model No.

Assembly Diagram
5
Final Assembly
Model No.