WALLYS DR40 9 Series User manual

www.wallystech.com 1
Wallys | User Manual | DR40X9
Logging in with serial
Step1:
Use SERIAL to connect locahost.
That is show how to use the Uart for DR40X9

www.wallystech.com 2
Wallys | User Manual | DR40X9
Step2:
When you see“Hit any key to stop autoboot“,please
click“Enter”in your keyboard.

www.wallystech.com 3
Wallys | User Manual | DR40X9
Writing command
Write the following command
Step1:
If you want to load the firmware as below,
write the command as follows
tftpboot 0x84000000 nornand-ipq40xx-single-2168-
202104231204.img&&imgaddr=0x84000000
&&source$imgaddr:script
Please note that please replace nornand-ipq40xx-single-2168-
202104231204 with your firmware name.

www.wallystech.com 4
Wallys | User Manual | DR40X9

www.wallystech.com 5
Wallys | User Manual | DR6018-S
Step2:
It’s done when you see as below picture shows.

www.wallystech.com 6
Wallys | User Manual | DR40X9
IPQ40xx UI setting
Input the IP：192.168.1.1 and login；
Step1:
Step2:
Input the user name：root；password：asdf1234，
then press the button“Login”，

www.wallystech.com 7
Wallys | User Manual | DR40X9
IPQ40xx UI setting
IP Setting:setting IP in the path“network->Interfaces->LAN-
>IPV4 address”
Step3: network setting
DHCP setting:DHCP and other protocol setting in the path
network->Interfaces->LAN->protocol”

www.wallystech.com 8
Wallys | User Manual | DR40X9
IPQ40xx UI setting
1.login the path network->Interfaces->WIFI,then choose one
wifi,we select the red marked as example,click the button‘Edit’
Step4: wireless setting

www.wallystech.com 9
Wallys | User Manual | DR40X9
IPQ40xx UI setting
2.The detail information show in the picture as below:
Channel:for channe lselect;
Step4: wireless setting
3.Transmit Power:signal chain power setting;ESSID:forID
4.Mode:it support 4 mode AP,AP(WDS),client,client(WDS)
Wireless Security:for Encryption setting

www.wallystech.com 10
Wallys | User Manual | DR40X9
IPQ40xx UI setting
5.In advance setting you can select which chain do
you need,which BW do you need and so on.
Step4: wireless setting
6.In the end,you need click the button“Save&Apply”,
and wait for 2 minutes,then you can enjoyit.

www.wallystech.com 11
Wallys | User Manual | DR40X9
IPQ40xx UI setting
Login System->Backup/Flash Firmware;Then click the button”
Generate archive”;Then download the archive.
Step5: Backup archive

www.wallystech.com 12
Wallys | User Manual | DR40X9
IPQ40xx UI setting
If 2 devices are link up,please check the information in the
“Associated Stations” toc performance.
Step6: Link up

DR40X9
THIS DOCUMENT CONTAINS PROPRIETARY TECHNICAL INFORMATION, WHICH IS THE PROPERTY OF
THE WALLYSTECH AND SHALL NOT BE DISCLOSED TO OTHERS IN WHOLE OR IN PART, REPRODUCED,
COPIED, OR USED AS THE BASIS FOR DESIGN, MANUFACTURING, OR SALE OF APPARATUS WITHOUT
WRITTEN PERMISSION OF WALLYSTECH.