Walton MYB-A1C User manual

MODE TIMER
FAN
HEALTH TURBO
LOCK AUH
SWING
SLEEP DISPLAY
ECO
SWING
Functions of Remote Controller
Model: MYB-A1C
1. Press to turn Power ON/OFF
1. Press to increase temperature
1. Press to select Fan Speed
(Low, Medium, High & Auto)
1. Press to turn ON/OFF Health
Mode
1. Press to turn ON/OFF
Left-Right Swing
1. Press to turn ON/OFF
UP-DOWN Swing
1. Press to turn ON/OFF Display
2. For Convertible Capacity
Air Conditioners:
a. Press 4 times to enter Capacity 1*
b. Press 6 times to enter Capacity 2*
c. Press 2 times to enter Rated
Capacity*
*See special note for model wise
capacity details
1. Press to turn ON/OFF ECO Mode
2. Press 2 times to Activate/Deactivate
Voice Command (Only for Oceanus
Series)
3. Press 4 times to Activate/Deactivate
Wi-Fi Function (Only for SMART
models)
4. Press 4 times to Activate/Deactivate
Bluetooth Function (Only for Bluetooth
models)
1. Press to turn ON/OFF Turbo
Mode
2. Press 6 times to turn ON/OFF
Auto Restart
3. Press 4 times to turn ON/OFF
Kids Mode
1. Press to set ON time when AC is OFF
2. Press to set OFF time when AC is ON
1. Press to decrease temperature
2. Press this button and Left-Right
Swing button at a time and hold
for 3 seconds to see temperature
in Fahrenheit unit"
1. Press to show room
temperature in IDU Display
2. Press and hold for 3 sec to
Lock/Unlock the remote
1. Pres s to turn ON/OFF Sleep Mode
2. Press 4 times to start Frost Clean (For
Inverna, Diamond & Oceanus Series)
1. Press to select Mode: Cool,
Dry, Fan, Auto & Heat (For hot
& cool AC only)
1. Kids Mode & Auto restart Activation/Deactivation
work only in Cool Mode and Heat Mode
2. Frost Clean Function and Convertible Capacity
Selection work only in Cool Mode
3. Press any key and hold for 3 seconds to turn
on backlight.
4. Convertible Capacity details
For WSI-INVERNA (ULTRASAVER)-12C:
Rated Capacity=12k BTU (1 Ton), Capacity 1=9K BTU (0.75 Ton)
Capacity 2= 6K BTU (0.50 Ton)
For WSI-KRYSTALINE(PRETO)-18F:
Rated Capacity=18k BTU (1.5 Ton)
Capacity 1=12K BTU (1 Ton), Capacity 2= 9K BTU (0.75 Ton)

Functions of Remote Controller
Model: WK14-R01
1. Press to turn Power ON/OFF
1. Press to turn ON/OFF
UP-DOWN Swing
1. Press and hold for 3 sec to
show the room temperature
in IDU Display
1. Press to increase temperature
1. Press to select Mode:
Cool, Dry, Fan, Auto & Heat
(For hot & cool AC only)
1. Press to turn ON/OFF Left-Right
Swing
1. Press to turn ON/OFF Turbo Mode
2. Press 6 times to turn ON/OFF
Auto Restart
3. Press 4 times to turn ON/OFF
Kids Mode
1. Press to decrease temperature
2. Press this button and Left-Right
Swing button at a time and hold
for 3 seconds to see temperature
in Fahrenheit unit
1. Press to turn ON/OFF Display
2. For Convertible Capacity
Air Conditioners:
a. Press 4 times to enter Capacity 1*
b. Press 6 times to enter Capacity 2*
c. Press 2 times to enter Rated
Capacity*
*See special note for model wise
capacity details
1. Press to ON/OFF Sleep Mode
2. Press 4 times to activate Frost
Clean (For Inverna, Diamond &
Oceanus Series)
1. Press to toggle between
Fan Speed (Low, Medium,
High & Auto)
1. Press to set ON time when AC is OFF
2. Press to set OFF time when AC is ON
3. Press and hold for 3 sec to Lock/Unlock
the Remote
1. Press to turn ON/OFF Health
Mode
1. Press to turn ON/OFF ECO Mode
2. Press 2 times to Activate/Deactivate
Voice Command (Only for Oceanus
Series)
3. Press 4 times to Activate/Deactivate
Wi-Fi Function (Only for SMART
models)
4. Press 4 times to Activate/Deactivate
Bluetooth Function (Only for Bluetooth
models)
1. Kids Mode & Auto restart Activation/Deactivation
work only in Cool Mode and Heat Mode
2. Frost Clean Function and Convertible Capacity
Selection work only in Cool Mode
3. Convertible Capacity details
For WSI-INVERNA (ULTRASAVER)-12C:
Rated Capacity=12k BTU (1 Ton), Capacity 1=9K BTU (0.75 Ton)
Capacity 2= 6K BTU (0.50 Ton)
For WSI-KRYSTALINE(PRETO)-18F:
Rated Capacity=18k BTU (1.5 Ton)
Capacity 1=12K BTU (1 Ton), Capacity 2= 9K BTU (0.75 Ton)

ECOTURBO
MODE
TIMER FAN SLEEP
Functions of Remote Controller
Model: WM2-S-C
1. Press to turn ON/OFF Turbo Mode
2. Press 6 times to turn ON/OFF Auto
Restart
3. Press 4 times to turn ON/OFF Kids
Mode
1. Press to select Mode: Cool, Dry,
Fan, Auto & Heat (For hot & cool
AC only)
1. Press to set ON time when AC is
OFF
2. Press to set OFF time when AC is
ON
3. Press and hold for 3 sec to Lock/
Unlock the remote
1. Press to turn ON/OFF ECO Mode
2. Press 2 times to Activate/Deactivate
Voice Command (Only for Oceanus
Series)
3. Press and hold for 3 sec to turn
ON/OFF Health Mode
3. Press 4 times to Activate/Deactivate
Wi-Fi Function (Only for SMART
models)
4. Press 4 times to Activate/Deactivate
Bluetooth Function (Only for Bluetooth
models)
1. Press to turn Power ON/OFF
1. Press to turn ON/OFF UP-DOWN
Swing
1. Press to turn ON/OFF Left-Right
Swing
1. Press to decrease temperature
2. Press this button and Left-Right
Swing button at a time and hold
for 3 seconds to see temperature
in Fahrenheit unit
1. Press to turn ON/OFF Sleep Mode
2. Press 4 times to start Frost Clean
(For Inverna, Diamond & Oceanus Series)
3. Press and hold for 3 sec to turn
ON/OFF IDU Display
1. Press to select Fan Speed
(Low, Medium, High & Auto)
1. Press to increase temperature
1. Kids Mode & Auto restart Activation/Deactivation work only in Cool Mode and Heat Mode
2. Frost Clean Function works only in Cool Mode

Functions of Remote Controller
Model: WI20-P01

 






 

M
zzz
1. Press to switch to Cool Mode
from any instance
1. Press to turn ON/OFF Health
Mode
1. Press to Activate/Deactivate
Kids Mode
1. Press to turn ON/OFF
UP-DOWN Swing
1. Press to turn ON/OFF Left-Right
Swing
1. Press and hold for 5 seconds to
start pairing with Wi-Fi module
(Only for SMART models)
2. Press and hold for 5 seconds to
start pairing with Bluetooth module
(Only for Bluetooth models)
1.Press and hold for 5 seconds
to start Frost Clean (For INVERNA,
DIAMOND & OCEANUS series)
1. Press to select Fan Speed
(Low, Medium, High, Auto)
1. Press & hold for 3 sec to store
any setting (you are currently
using) of the remote. After storing
a setting we can go to another
setting. If then we only press
this button again, the remote
will provide the earlier setting
1. Press to turn ON/OFF Sleep
Mode
1. Press and hold for 3 sec to show
room temperature in IDU Display
1. Press to set ON time when AC is OFF
2. Press to set OFF time when AC is ON
1. Press to turn ON/OFF Display
1. Press to turn ON/OFF Turbo
Mode
2. Press 6 times to turn ON/OFF
Auto Restart
1. Press to decrease temperature
2. Press this button and Left-Right
Swing button at a time and hold
for 3 seconds to see temperature
in Fahrenheit unit
1. Press to enter Power Saving
Mode selection (70%, 50% & 30%)
1. Press to increase temperature
1. Press to select Mode: Cool,
Dry, Fan, Auto & Heat (For hot &
cool AC only)
1. Press to turn Power ON/OFF
1. Kids Mode & Auto restart Activation/Deactivation work only in Cool Mode and Heat Mode
2. Frost Clean Function works only in Cool Mode
3. Press any key and hold for 3 seconds to turn on backlight.