WamBam HANDY ANDY User manual

WWW.WAMBAMFENCE.COM 1
ASSEMBLY INSTRUCTIONS AG14005
AG14005
ASSEMBLY
INSTRUCTIONS
60 MIN
Approximate assembly me
Want to see a video on how to
assemble this product?
Scan the QR code
HANDY ANDY
ALUMINUM GATE
WWW.WAMBAMFENCE.COM VER. 060821

WWW.WAMBAMFENCE.COM
2
ASSEMBLY INSTRUCTIONS
AG14005
kCheck the inside of the larger pieces in your box for other
materials packed inside.
kWhen assembling components, place on a non-abrasive
surface (i.e. shipping box) to avoid scratching.
kWe recommend an area approximately 5’x 8’ for
unobstructed assembling.
kYou should not need to use excessive force when assembling
components.
VISIT OUR WEBSITE FIRST,
SO WE CAN HELP YOU RIGHT AWAY!
Although great care has been taken to ensure proper packaging
and handling of this product, occasionally problems occur. If you

our website to order replacement parts. If you experience any
further trouble with your product, please contact our customer
care department.
parts.nychbrands.com
[e-mail]
704-892-5222 /877-778-5733
Customer service agents are available to take calls weekdays from 9am-
5pm EST.If you call outside of business hours, please leave a voicemail.
To help you quickly and accurately, please have reference item
number AG14005 
found on page 5. It is helpful if you can provide the batch lot
which is a stamped number inside the box.
Please give us a call at 704-892-5222 / 877-778-5733.

this product, we are happy to assist you with the process.
If for some reason you need to return this product, please

return the product, you will need to iniate the return from the
company you originally purchased from.
GENERAL
INFORMATION
MISSING OR
DAMAGED PARTS?
NEED ASSEMBLY
HELP?
NEED TO
RETURN?
IMPORTANT

WWW.WAMBAMFENCE.COM 3
ASSEMBLY INSTRUCTIONS AG14005

1. Read over fence instrucons rst.
2. Pre-assemble the gate frame.
3. Install your gate posts before your fence posts.
4. Do not hang your gate system o a single non-supported post.

understand your fence.



install your gate posts before you do anything else.

of fence that is connected to another post. This way, the weight strain will be trans-
ferred onto two posts versus just one. Installing fence panels on both sides of your



your gate correctly, please disassemble as necessary, and use the included self-drilling
stainless steel screws to permanently assemble the gate.
1. That you have everything necessary to complete the gate.
2. That you will have assembled the gate frame in the correct order.
3. All of the pieces t and funcon properly.
4. The gate height and width are similar to the measurements shown on page four.
GENERAL INFORMATION

WWW.WAMBAMFENCE.COM
4
ASSEMBLY INSTRUCTIONS
AG14005
DETAILED PRODUCT DIMENSIONS AND SPECIFICATIONS
Metal Post Stabilizer Gate Jig (Vinyl)
Ground
50in.
48in.
42in.
36in.
58in.
52in.
2in.
56in.
3.94in.
36in.
String Line
Ground
WamBam
Ornamental Anchor
WamBam
Pipe Anchor

WWW.WAMBAMFENCE.COM 5
ASSEMBLY INSTRUCTIONS AG14005
STEP 1: LAY OUT MATERIALS
A B C
E
H
D
G
J
K
L
M
N
O
Gate Post Cap (2) Metal Post
Stabilizer (1)
Gate End Assembly (2) Picket - Flat Top (3)
5/8
Aluminum Gate
Hinge (2)
Latch Finger (1)
Nut and Bolt (12)
1¼” Self-Drilling
Stainless Steel
Screw (32)
⅝” Self-Drilling
Stainless Steel
Screw (23)
Gate Jig (1)
1½” x 3½” x 55”
F
I
Latch Catch (1)
Top Rail (1)
1” x 1” x 45”
Middle Rail (1)

Boom Rail (1)
1” x 1” x 45”
Picket - Spear Top (4)
5/8

WWW.WAMBAMFENCE.COM
6
ASSEMBLY INSTRUCTIONS
AG14005
STEP 2: INSTALL GATE JIG, POST ANCHORS, AND POSTS
STEP 2.1 STEP 2.2

60” long x 6” wide x 5½” deep.

Stabilizer (B) and pound it into the ground.

into the metal post stabilizer and determine

Place the Gate Jig (C) over the
metal post stabilizer.


will insert into both the gate jig and the metal post
stabilizer.

Pound your post anchors into place. See


Adjust the leveling donuts and install the
posts.
Note: Metal post
stabilizer to be used
only on hinge post.
5½”
B
C
STEP 2.3
STEP 2.5 STEP 2.6
STEP 2.4

WWW.WAMBAMFENCE.COM 7
ASSEMBLY INSTRUCTIONS AG14005
STEP 2.7
Make sure to fasten the fence panels

STEP 3: INSERT PICKETS
STEP 3.1
(D)
and align the holes in the pickets with the

Insert the Flat Top (H) and Spear Top (I)
Pickets into the Middle Rail (E)
illustrated. Align the holes in the pickets with
the holes in the middle rail.
D
E
IH
STEP 3.2

WWW.WAMBAMFENCE.COM
8
ASSEMBLY INSTRUCTIONS
AG14005

(O)

rail. If you force the screw, you will strip it.
Align the Top Rail (F) over
the pickets and insert the
pickets accordingly.
F
STEP 3.3 STEP 3.4
O
STEP 4: FINISH ASSEMBLING THE GATE
STEP 4.1 STEP 4.2
Face the Gate End Assembly (G) up to
receive the assembled panel. All three
rails must be inserted simultaneously to
prevent binding.
Insert the rails

for the bolt to be
installed later.
G

WWW.WAMBAMFENCE.COM 9
ASSEMBLY INSTRUCTIONS AG14005
STEP 4.3 STEP 4.4
Flip the unit over, and insert the unit into the
opposite gate end assembly.
Insert the Bolts (M), fasten

M
STEP 5: ATTACH HINGES AND LATCH FINGER
STEP 5.1 STEP 5.2
(J) to the
-
less Steel Screws (N).
(K) to the gate post with

J
K
N

WWW.WAMBAMFENCE.COM
10
ASSEMBLY INSTRUCTIONS
AG14005
STEP 6: ATTACH THE GATE TO THE FENCE PANEL
STEP 6.1
STEP 6.2
Use temporary spacers or blocks to rest the gate on during

self-drilling stainless steel screws.

self-drilling stainless steel screws into the pre-
drilled holes on the inside of the hinges.

WWW.WAMBAMFENCE.COM 11
ASSEMBLY INSTRUCTIONS AG14005
Align and fasten the Latch Catch (L)
self-drilling stainless steel screws.
Congratulaons! You did it! Go grab a beverage of your choice, admire your handiwork, and show us
what you got by entering our annual photo contest!
L
STEP 6.3

WWW.WAMBAMFENCE.COM
12
ASSEMBLY INSTRUCTIONS
AG14005
ALTERNATIVE APPLICATION: INSTALL OVER A
SIDEWALK OR PATH
Opon 1: If the
sidewalk is less than
52”, use the gate jig as
a temporary spacer.
Proceed installing
the panels according
to the fence’s install
guide.
STEP 1.1
ALTERNATIVE APPLICATION: INSTALL OVER A
SIDEWALK OR PATH
STEP 1.1
Sidewalk/path
Use the gate jig to ensure
proper spacing.
Sidewalk/path
Opon 2: If the side-
walk is wider than 52”,
use surface mounts and

included with them.
Surface mounts must be
purchased separately and
can be found by searching
item SKU AP60301.

WWW.WAMBAMFENCE.COM 13
ASSEMBLY INSTRUCTIONS AG14005
WWW.WAMBAMFENCE.COM
704-892-5222
877-778-5733
[e-mail]
6935 Reames Rd. Ste. K.
Charloe, NC 28216