WARDRAY PREMISE MR2501 User manual

MR Accessories
OPERATORS MANUAL
MR2503
MR4502 MR4504
MR2508
MR2521-3MR2520
MR2504 MR3005
MR2502
MR2530
MR4504/S
MARCH 2020 GEN.S.20/172a
MR2506 MR2508D
MRCT450 MR2525
MR2505
MR2501
MR4503

2
Introduction
Thank you for purchasing this MR Conditional product. Manufactured and tested to the highest
standards it is guaranteed MR Conditional to 7.0T.
Our products are manufactured by Wardray Premise Ltd at our UK based factory to BS EN ISO
13485:2016.
Manufacturing address:
Wardray Premise Limited, Northern Regional Office, Unit 2,
Springvale Works, Elland Road,
Brighouse, West Yorkshire, HD6 2RN, UK
To ensure that you obtain maximum benefit from your product, please take a few minutes to read
the enclosed information regarding operation, service and maintenance.
If you have any problems in the meantime or would like any advice about this or any other
products from the Wardray Premise range, please contact us at our Head Office:
Wardray Premise Limited, Hampton Court Estate, Summer Road,
Thames Ditton, Surrey, KT7 0SP, UK
Tel: [phone]
Fax: [phone]
E-mail: [e-mail]
Kindly note:
If you modify a Wardray Premise product you will invalidate your warranty.
Unless you have our express written permission to modify a product, we transfer all liabilities for
modified products to you.
EU Authorised Representative:
Advena Ltd
Tower Business Centre
2nd Floor, Tower Street
Swatar
BKR 4013
Malta

3
Safety Definitions for MRI as Defined by International Standard
F2503-20
MR SAFE:
An item that poses no known hazards resulting from exposure to any MR
environment. MR SAFE items are composed of materials that are electrically
non-conductive, non-metallic, and non-magnetic.
MR CONDITIONAL:
An item with demonstrated safety in the MR environment within defined conditions
including conditions for the static magnetic field, the time-varying gradient
magnetic fields and the radiofrequency fields.
Supplementary marking – additional information that, in association with marking
as “MR CONDITIONAL,” states via additional language the conditions in which an
item can be used safely within the MR environment.
MR UNSAFE:
An item which poses unacceptable risks to the patient, medical staff or other
persons within the MR environment.

4
Index
Page 5 - MR2501 - Instrument Trolley with drawer
MR2502 - Instrument Trolley without drawer
Page 6 - MR2503 - Overcouch Instrument Trolley
Page 7 - MR2504 - Single Step Stool
MR2505 - Double Step Stool with handrail
MR2506 - Double Step Stool without handrail
Page 8 - MR3005 - Waste Bins
Page 9 - MR2508 - Linen Stand
MR2508D - Double Linen Stand
Page 10 - MR2530 - Drug Administration Trolley
Page 12 - MR2520 - Utility Trolley with drawers
MR2521/3 - Utility Trolley with shelves
Page 13 - MR2525 - Lockable Utility Trolley
MRCT450 Coil Trolley
Page 14 - MR4502 - Surgeons Stool with Arm and Back Rests
MR4503 - Surgeons Stool with Back Rest
MR4504 - Surgeons Stool without Arm or Back Rests
MR4504/S - Surgeons Stool with Saddle seat
Page 15 - Braked Castor Operation
Page 16 - General Maintenance
Page 17 - Warranty Registration Form

5
MR2501 / MR2502 INSTRUMENT TROLLEYS
Specification
The MR2501 and MR2502 are designed to be MR Conditional for use up to and including 7.0
Tesla and are manufactured and tested to the highest standards.
Please only use the unit for the purpose it was intended.
The MR2501 Instrument trolley comes with two shelves and a drawer (Fig.1) and the MR2502
Instrument trolley has two shelves and no drawer (Fig.2).
Fig 1 Fig 2
Maximum load: 20 Kg each shelf
Maximum load: per plastic drawer 5 Kg
Serial Number

6
MR2503 OVERCOUCH INSTRUMENT TROLLEY
Specification
The MR2503 is designed to be MR Conditional for use up to and including 7.0 Tesla and is
manufactured and tested to the highest standards.
Please only use the unit for the purpose it was intended.
Operating Instructions
To adjust the height of the tray, unlock the adjusting screw and lift to the height required, when
height attained lock the adjusting screw.
Maximum height 1400mm / Minimum height 950mm
Maximum load: Do not load the tray with more than 11 Kg
Adjusting Screw
Serial Number

7
MR2504 / MR2505 / MR2506 STEP STOOLS
Specification
The MR2504, MR2505 and MR2506 are designed to be MR Conditional for use up to and
including 7.0 Tesla and are manufactured and tested to the highest standards.
Please only use the unit for the purpose it was intended.
The MR2504 is a single step stool (Fig 1),
The MR2505 is a double step stool with left hand side handrail (Fig 2) The handrail for the
MR2505 can be allocated on the right or the left hand side at the time of ordering.
The MR2506 is a double step stool without handrail (Fig 3)
Fig 1
Fig 2
Fig 3
Maximum load: 220 Kg patient
Unit weight 5.4 Kg
Unit weight 10.2 Kg
Unit weight 12 Kg
Serial Number
Underside of step

8
MR3005 WASTE BINS
Specification
The MR3005 is designed to be MR conditional for use up to and including 7.0 Tesla and is
manufactured and tested to the highest standards.
Please only use the unit for the purpose it was intended.
The features for this product include the following:
• It has a hands free operation to assist with infection control procedures. To open the bin lid,
using your foot, press the pedal in the centre of the base. The lid will close when your foot
is removed from the pedal.
• Silent closing lid.
• 2 rear wheels to assist in moving the bin.
• Lids are available in yellow, black, orange and blue (as shown).
• Wipe clean bag grab.
• MR Conditional to 7.0T.
• 30 litre (MR3005/30) or 65 litre (MR3005/65)
capacity.
• This product is Fire Retardant.
Empty bin weight 30Ltr = 5.5 Kg
Empty bin weight 65Ltr = 8.5 Kg
Maximum weights: 1Ltr = 1 Kilo
Max 30Kg in 30 litre capacity bin (MR3005/30)
Max 65 Kg in 65 litre capacity bin (MR3005/65)
2 people are required to safely move the unit if
fully laden.
Serial Number on
back face

9
MR2508 LINEN STAND &
MR2508D DOUBLE LINEN STAND
Specification
The MR2508 (Fig 1) and MR2508D (Fig 2) are designed to be MR Conditional for use up to and
including 7.0 Tesla and are manufactured and tested to the highest standards.
Please only use these units for the purpose intended.
(sack not included)
Maximum load per bag 10 Kg
Fig 2Fig 1
Serial Number

10
MR2530 DRUG ADMINISTRATION TROLLEY
Specification
The MR2530 (Fig 1) is designed to be MR Conditional for use up to and including 7.0 Tesla
and is manufactured and tested to the highest standards.
Please only use the unit for the purpose it was intended.
The MR2530 is constructed in aluminium has four drawers and a three sided top shelf. The
locking design locks all four drawers at once using one key. The cabinet is secured by ensuring
the locking front panel is engaged and the key turned to lock (Fig 2).
To open, turn the key and fold the securing locking panel backwards (Fig 3).
It has four 100mm diameter braking castors with 140mm buffers. To engage the brakes place
your foot on the front part of the brake lever and push down (Fig 4). To release the brake place
your foot on the rear part of the brake lever and press down (Fig 5).
It also has an accessory rail (Fig 6) for IV Pole and Oxygen cylinder holder (sold separately).
Fig 1
Serial Number on
back face

11
Brake Lever
Fig 4 Brake Lever Release
Fig 5
Fig 2
Fig 3
Accessory Rail
Fig 6
Maximum load: per drawer 10 Kg.
Maximum load: top shelf 20 Kg.
2 people are required to safely move the unit if fully laden.

12
MR2520 / MR2521/3 UTILITY TROLLEYS
Specification
The MR2520 and MR2521/3 are designed to be MR Conditional for use up to and including 7.0
Tesla and are manufactured and tested to the highest standards.
Please only use the unit for the purpose it was intended.
The MR2520 (Fig 1) Standard Utility trolley comes with 6 x 75mm deep drawers and a 2mm
aluminium grey powder coated top as standard.
The MR2520 (not shown) Special Utility Trolley comes with either of the following draw depths
150mm, 200mm and 300mm or any combination of the 3, which must be specified when the
order is placed.
The MR2521/3 (Fig 2) Utility Trolley comes with 3 x 2mm aluminium grey powder coated shelves
as standard.
Also available with 6 shelves: MR2521/6 (not shown) Utility Trolley with 6 x 2mm aluminium
grey powder coated shelves as standard.
Fig 2
Fig 1
Maximum load: per plastic drawer 5 Kg.
Maximum load: top shelf 20 Kg.
Maximum load: per shelf 20 Kg.
Serial Number on
back face

13
MRCT450 COIL TROLLEY
Made from powder coated aluminium the coil
trolley has lockable rolling castors and can
safely transport coils to and from an MRI suite.
It is possible to have the trolley powder coated
in a different RAL colour. Please contact our
sales department for further details.
If the trolley is fully laden assess if it is safe
to manoeuvre or whether additional help is
required.
Always try to push rather than pull where
possible. When negotiating a slope or ramp,
get help from another worker.
MR2525
The MR2525 is designed to be MR Conditional for use
up to and including 7.0 Tesla and are manufactured and
tested to the highest standards.
Please only use the unit for the purpose it was intended.
The MR2525 Utility trolley comes with 6 x 75mm deep
drawers and a 2mm aluminium grey powder coated top
as standard. It has a Perspex, lockable front (2 keys
supplied) and the sides and back are enclosed.
It has a side rail with adjustable IV pole and an oxygen
cylinder holder.
Serial Number
on back face
Serial Number

14
MR4502 / MR4503 / MR4504 / MR4504/S SURGEONS STOOLS
Specification
The MR4502 / MR4503 / MR4504 / MR4504/S are designed to be MR conditional for use up to
and including 7.0 Tesla and are manufactured and tested to the highest standards.
Please only use the unit for the purpose it was intended.
The MR4502 (Fig 1) is a surgeons stool with back and arm rests.
The MR4503 (Fig 2) is a surgeons stool with back.
The MR4504 (Fig 3) is a surgeons stool with no arm or back rests.
The MR4504/S (Fig 4) is a surgeons stool with ergonomically designed saddle seat to improve
posture.
Operating Instructions
The height is adjusted by rotating the stool seat in an anti-clockwise direction, to lower simply
rotate the seat in a clockwise direction.
Fig 1 Fig 3 Fig 4
Maximum user weight 150 Kg.
Armrests are for comfort only and are
not weight bearing.
Serial Numbers are located on the tube
Fig 2

15
BRAKED CASTOR OPERATION
Specification
The following items are fitted with braked castors:
MR2501 / MR2502 Instrument Trolleys have 2 braking castors and 2 non-braking.
MR2503 Overcouch Instrument Trolley has 2 braking castors and 2 non-braking.
MR2508 / MR2508D Linen and Double Linen Stands have 2 braking castors and 2 non-braking.
MR2530 Drug Administration Cabinet has 4 braking castors.
MR2520 / MR2521/3 / MR2525 Utility Trolleys have 2 braking castors and 2 non-braking.
MRCT450 Coil Trolley has 2 braking castors and 2 non-breaking.
MR4502 / MR4503 / MR4504 / MR4504/S Surgeons Stools have 2 braking castors and 3 non-
braking.
Operating Instructions
To engage the brake on the castor, firmly press the lever downwards with your foot (see Fig 1).
To release the brake on the castor, use your foot to lift the lever upwards (see Fig 2).
Press downwards with foot
Fig 1 Fig 2
Lift upwards with foot

16
General Maintenance
It is advisable that each product is regularly inspected for signs of wear, damage or faults eg:
• Check castors for free movement and locking, check for, and remove debris that may have
become caught in the brake and around the axle. This is a common occurrence and can
lead to a shortened life expectancy of the castors if left unattended.
• Check drawers for free movement.
• Check locks operate correctly.
• Ensure any hand rails are secure eg; the Double Step Stool.
• Inspect any welded joints for signs of damage.
• Ensure fittings eg: bolts are not lose.
Cleaning
This product should be washed with a disposable cloth wrung out in a solution of warm water and
detergent. The product should be rinsed with warm water and dried thoroughly with paper towels.
If required the product can be washed down with hand hot sodium hypochlorite solution up to 1%
or 10000 parts per million chlorine combined with a detergent. Alternatively, follow your local
guidelines or instructions.
If any of the above give cause for concern, please contact your Wardray Premise service
provider.
EU Declarations of Conformity and Magnetic Testing
Documentation is available upon request
Please register your product with us, via the Warranty Registration Form (see page 17), for
ease of contact in case of urgent upgrades or recalls.
If the unit is damaged please do not attempt to repair as this could invalidate your
warranty and could compromise its MR integrity and therefore safety, please call or
email Wardray Premise Limited:
T: [phone]
F: [phone]
E-MAIL: [e-mail]
Please include the product code and the product’s serial number when
contacting Wardray Premise.

17