WarmlyYours JUDY MR-3624H-JUD User manual

Product improvements are continual.
Measurements may vary.
Please verify all dimensions prior to installation.
Supplied Hardware
Installation Support •[phone] • www.WarmlyYours.com
JUDY LED MIRROR
INSTALLATION MANUAL
MR-3624H-JUD
Tools Required Front
Back
x 2x 2x 2
Black, adjustable
standoffs with adhesive
(optional)
Screws Anchor
MAIN IN
L N
21 1/2”
24”
ON/OFF
SWITCH
36”
Center of the
electrical connection
box behind unit
21 1/2”
18” 6”
14 1/2”
Mirror Defogger

Installation Support •[phone] • www.WarmlyYours.com
Mounting Instructions
2x4
Stud
(If possible)
2x4
Stud
(If possible)
Mounting
Screws
Electrical
Connection Box
Electrical
Gang Box
JUDY LED MIRROR
INSTALLATION MANUAL
MR-3624H-JUD
L N
9 1/2” (vertical mount)
21 1/2” (horizontal mount)
L N
Connect Wire
Clamp Wire
Step 1 Step 2 Step 3
2x4
Stud
(If possible)
If stud is not present,
use drywall anchor.
Step 4 Step 5 Step 6
The electrical gang box
should be installed
according to the location
of the unit’s electrical
connection box located
on the back.
Electrical Box with
installer-supplied,
approved wire (at
least 2 feet long*).
*Recommended
Remove Cover

Horizontal Mounting Instructions
Installation Support •[phone] • www.WarmlyYours.com
JUDY LED MIRROR
INSTALLATION MANUAL
MR-3624H-JUD
MAIN IN
L N
This is an optional
way to adjust the
plumb of the
mirror in relation
to the wall it's
mounted on.
Using the Side-Mounted Touch Control
Controlling the LED lighting for the Judy is accomplished
by touching the side-mounted on/off button.
To turn the Judy’s LED lighting on or off, simply give the
on/off button a quick touch.
When the Judy’s lighting first comes on, the color
temperature of the lighting will be a cool white (6,500K).
To cycle the color temperature to a warmer 3,000K,
simply hold the touch on/off button for a few seconds
until the light completes its color transition.
Step 7
(optional)
x 2