Watchguard VSCD50F User manual

PROFESSIONAL INDOOR / OUTDOOR
REPLICA INFRARED CCTV CAMERA
Installation Manual
Model: VSCD50F
www.watchguardalarms.com.au

1
Before commencing installation, please ensure you have all the parts listed below:
Note: To reduce the risk of vandalism or interference with the product, choose a location which is not
easily accessible from the ground (above 3m typical).
Battery Installation: (Requires 2 x AA batteries – Not included)
Step 1.
To access the battery compartment
simply slide the weather shield
from the top of the camera and
remove.
Step 2.
Remove the internal battery cover
and insert 2 x AA batteries.
Check Operation: The red LED
light located at the front of the
camera will begin flashing every 6
seconds.
Step 3.
Replace the battery cover and slide
the weather shield back on to the
camera. Now simply mount the
camera in a suitable location using
the supplied installation hardware
and adjust camera angle as
required.
1 x Weatherproof Replica
Infrared Camera with housing
2x Warning Stickers Installation Hardware For
Mounting Wall Bracket
LED Li
g
ht O
p
eration
(
O
p
tional
)
:

2
WARRANTY CARD
This product is guaranteed against faulty materials and workmanship for a period of twelve months
from the date of purchase. This warranty becomes void if the product has been tampered with,
damaged by accident, damaged in any other way by improper use or has been purchased second
hand. All production orders have quality inspections.
For any customer query or in the unlikely event of a product failure,
please contact your local office as set out below.
DO NOT RETURN THE PRODUCT TO THE RETAILER
WARRANTY FORAPPLIANCES USED COMMERCIALLY LIMITED TO 90 DAYS
PRODUCT: PROFESSIONAL INDOOR / OUTDOOR REPLICA INFRARED CCTV CAMERA
Model No: VSCD50F Purchase Date: ______________________
Product Purchased From: ____________________________________________________
Your Name: _______________________________________________________________
Address: _________________________________________________________________
_________________________________________________________________________
Phone Number: ____________________________________________________________
IMPORTANT!
Please retain this warranty card along with your purchase receipt.
Please do not post to the retailer.
Contact details - 9:00am - 5:00pm (Mon - Fri)
RhinoCo Technology Australia Head Office:
9 Hannabus Place, McGrath’s Hill, NSW. 2756 Australia, Phone: [phone] Fax: [phone]
UK Sales Office
Unit 6 Ubique Park, March Way,
Battlefield Enterprise Park,
Shrewsbury, SY1 3JE
Phone: [phone]
Email: [email protected].uk
Italy Sales Office
24 Piazza Garibaldi, 98034
Francavilla Di Sicilia (ME) Italy
Phone: [phone]
Cell Phone: [phone]
Email: [email protected]
South Africa Sales Office
Route 21 Corp/Park, Unit C3
Prospect Close, 311 Regency Drive,
Irene Ext 30, South Africa
Phone: [phone]
Email: [email protected]