Wave Immersive Pro 3S-2300 User manual

Earbuds
LED Light indicator
To reset - touch 5 times
Turn on - take out from the
charging case. Or Long press
for 3 seconds.
Previous song - long press for
2 seconds
Unpaired - red blue light flashing fast
Waiting to pair - blue light flashing on both sides
Connected - all lights offConnected - all lights off
Charging complete - all lights off
Reset complete - blue and red light on for 1 second then off
Incoming call - blue light flashes 2 times for 3 seconds
Power on - red and blue light flash for 1 second
Power off - red light flashes for 1 second
Charging - red light on
Next song - long press for 2
seconds
Volume up - touch one time
Volume down - touch one time
Play - touch 2 times
Pause - touch 2 times
Answer call - touch 1 time
Reject call - long press for 2
seconds
Open voice control - touch 3
times
Close voice control - touch 3
times
Hang up - touch 2 times
Cancel call - Long press for 2
seconds
Turn off - put the earphones
into the case or long press for
4 Seconds after disconnected.
Auto power off starts after 3
minuets of being disconnected.
Left Right
Immersive Pro user guide
Pairing name: Wave 3S-2300 or Wave 3S-2301

Immersive Pro user guide
Voice sounds
Turn on - "Power on"
Low battery - "Battery low"
Connected - "Connected"
Loudest volume - "Dudu"
Scan the QR code and share your experience
to receive 10% off your next purchase.
We are Australia’s newest audio brand, created in Melbourne and we’d love
to hear about your experience with our product.
waveaudio.com.au
Thank you for your support!
©2022 3sixT. All rights reserved.
This product may be covered by one or more patents. Tenancy: E1/5 Grevillea Pl Brisbane Airport QLD 4008. EU Importer: Wentronic GmbH, Pillmannstraße 38112,12 Braunschweig Germany.
Input: 5V/1A
Battery Case/Earbud: 450mAh/50mAh
Want to stay in touch?
Follow us on @waveaudioau
Disconnected - "Disconnected"
Lowest volume - "Dudu"
Turn off - "Power off"
Pairing - "Pairing"
Pairing name: Wave 3S-2300 or Wave 3S-2301