Wayde King Water Filtration Platinum Series User manual
PURE WATER TECHNOLOGIES, LLC | dba Wayde King Water Filtration™ www.KingWaterFiltration.com |
5502 S. Fort Apache Rd. Suite # 100, Las Vegas, NV 89148 | Customer Service Ph: 855.957.2166 | customerservice@kingwaterfiltration.com
King Water Filtration
Platinum Line Owner’s Manual
Municipal Water Refinement Systems:
WK-PLA-MUN-1054 and WK-PLA-MUN-1354
Copyright ©2019
Wayde King Water FiltrationTM
All rights reserved
MADE IN THE USA
&-Stage Water Treatment System
v
Patented V
h
™
Healthier water for drinking and cooking.
Improves air quality in your home.
Less soap and detergent. Softer hair and skin.
Naturally prevent hard water scale build up without the use of salt or potassium.
Included Parts
(1) x 1" Stainless Steel Bypass Valve
(1) x Drain Barb Fitting
(2) x 18" x 1" M-F Stainless Flex lines
(2) x Adaptor Coupling Assemblies with O-rings
(1) x Fleck 5600 SXT Automatic Backwash Valve
PURE WATER TECHNOLOGIES, LLC | dba Wayde King Water Filtration™ www.KingWaterFiltration.com |
5502 S. Fort Apache Rd. Suite # 100, Las Vegas, NV 89148 | Customer Service Ph: 855.957.2166 | customerservice@kingwaterfiltration.com
Table of Contents
IMPORTANT INFORMATION...............................................................................................................1
SAFETY PRECAUTIONS.....................................................................................................................2
ARRIVAL, UNPACKING, AND INSPECTION, SYSTEM LOCATION...................................................3
MUNICIPAL SYSTEM AUTOMATIC CONTROL VALVE PROGRAMMING.........................................4
TYPICAL INSTALLATION AND SYSTEM LOCATION.........................................................................5
CONNECTING WATER FILTRATION SYSTEM TO WATER SUPPLY ...............................................6
TIPS TO AVOID ACCIDENTAL PROPERTY DAMAGE.......................................................................7
INSTALLING A LEAK DETECTOR VALVE ..........................................................................................7
TROUBLESHOOTING..........................................................................................................................8
FREQUENTLY ASKED QUESTIONS...................................................................................................8
SYSTEM BENEFITS AND FEATURES................................................................................................9
MEASURING SYSTEM EFFECTIVENESS........................................................................................10
EVAPORATIVE SPOTTING ...............................................................................................................10
WARNING...........................................................................................................................................10
SHIPPING POLICY.............................................................................................................................11
RETURN POLICY...............................................................................................................................12
RETURNS PROCEDURE...................................................................................................................13
PRODUCT WARRANTY INFORMATION...........................................................................................14
HOW TO SUBMIT A WARRANTY CLAIM..........................................................................................15
Contact us for questions about your order, technical support and product information, or general comments or questions.
PURE WATER TECHNOLOGIES, LLC | dba Wayde King Water Filtration™ www.KingWaterFiltration.com |
5502 S. Fort Apache Rd. Suite # 100, Las Vegas, NV 89148 | Customer Service Ph: 855.957.2166 | customerservice@kingwaterfiltration.com
1
IMPORTANT INFORMATION
•Do not run ½" inside diameter (ID) semi-rigid drain tube more than 20 running feet. If over 20 running feet,
increase drain line tubing size to 3/4" ID for the entire length of tube.
•Have control valve set correctly for your specific water needs.
•If installing more than one unit, the regeneration/backwash times should be staggered.
•A pressure regulator, such as a slow-flow regulator, is recommended to be installed in front of the unit's water
inlet if water pressure (including any possible pressure spikes) could exceed 60 psi. The most common operating
water pressure range is 35-65 psi. Failure to comply will void the warranty. Wayde King Water FiltrationTM
assumes no liability for damage caused by excessive water pressure.
•Check for proper connection on all hoses, tubing, connectors, and fittings to avoid leaks.
•After prolonged periods of non-use such as during a vacation, it is recommended that the system be flushed
thoroughly. Let water run for 10-20 minutes before using.
•Check plumbing inlet and outlet to ensure the proper flow of water through the system.
•Plug system into a 110-volt outlet which contains a fuse or circuit breaker of 20 amps.
•Do not use the system on cold water supply line with less than 20 psi.
•Do not use the system where water is microbiologically unsafe or with water of unknown quality.
•All water treatment installations must conform to local plumbing, electrical and sanitation codes. These codes are
established for your protection. Check with your local public works department for current plumbing codes.
•Installation errors can cause property damage. Wayde King Water Filtration™ assumes no liability whatsoever for
systems improperly installed or installation by someone other than a licensed plumber or qualified contractor.
•The contaminants or other substances advertised to be removed or reduced by the selected filtration system(s)
are not necessarily in your water. Ask your local water municipality for a copy of their water analysis, or have your
water tested by a reputable water lab.
•Your King water treatment system not only removes harmful contaminants but will also reduce harmful scale
buildup, extend the life of your plumbing and appliances, and, most importantly, it will enhance the healthy
minerals to assist in providing spring quality alkaline quality drinking water for all your family's water needs
throughout your entire home.
***pH levels vary by region, individual results may vary***
Installation in an area protected from the elements and freezing is recommended. The unit should be
protected from rain, dust, flooding, snow, freezing, and direct sunlight (the system's exposure to direct
sunlight may cause algae growth). Failure to install as recommended may void the warranty.
PURE WATER TECHNOLOGIES, LLC | dba Wayde King Water Filtration™ www.KingWaterFiltration.com |
5502 S. Fort Apache Rd. Suite # 100, Las Vegas, NV 89148 | Customer Service Ph: 855.957.2166 | customerservice@kingwaterfiltration.com
2
SAFETY PRECAUTIONS
Read all instructions, specifications, cautions, and warnings before installing and using your water filter system. Learn the
specific details regarding installation and use. Failure to follow them could cause serious property damage.
Installation errors can cause property damage. All equipment needs to be plumbed into the water system by a
licensed plumber.
These guidelines must be followed during system installation:
•Use the system on a potable, safe-to-drink, COLD water supply only. Do not use on hot water line or water that is
microbiologically unsafe.
•The system is for indoor use only.
•Turn the cold water line off while installing the system.
•When installation is complete, re-check the system to ensure there are no leaks or drips.
•The rubber O-ring provides a watertight seal between the cap and the bottom of the housing. Make sure the
O-ring is properly seated in the groove below the threads of the housing or a water leak could occur.
•Do not cross-thread fittings or housings. If cross-threaded (stripped), place the unit out of service. Stripped
threads are incapable of holding the loads they were designed for. Cross-threading (stripping) is usually caused
by the fitting being applied at an angle to the proper position and then being force-tightened.
PLEASE PAY ATTENTION TO INSTALLATION INSTRUCTIONS
TO MINIMIZE CARBON DUSTING
To Minimize Carbon Dusting and Pressure Loss
in Your Plumbing and Fixtures:
1. Verify that the system is properly sized prior to installation. Pressure loss
and decreased service life can result from systems that are undersized.
2. Pre-soak the filter by filling with water for at least 24 hours.
3. After water treatment system is installed, run kitchen faucet on warm for 30
minutes to flush filtration system.
4.
In the rare event you have excessive sediment or carbon dusting coming
from your faucets, a post-sediment filter may be required.
PURE WATER TECHNOLOGIES, LLC | dba Wayde King Water Filtration™ www.KingWaterFiltration.com |
5502 S. Fort Apache Rd. Suite # 100, Las Vegas, NV 89148 | Customer Service Ph: 855.957.2166 | customerservice@kingwaterfiltration.com
3
ARRIVAL, UNPACKING, AND INSPECTION SYSTEM LOCATION
•Inspect the carton and water filter for evidence of rough handling and
concealed damages. If contents appear damaged, ask driver or contact the
carrier for a damage claim form to fill out. Notify shipper immediately.
•Remove components from the shipping carton. Check that all installation
parts are present, which includes the unit and installation hardware.
•Make a complete inspection of the system to ensure that:
a. there are no physical damages to the system,
b. all accessories are present,
c. and the system is clean and dust free.
CHECKLIST
WATER FILTER SYSTEM
•Unpack the water filter from
shipping box.
•Unpack the control valve from
shipping box.
✓
All Point of Entry Whole House
models with backwashing and
backwash programming.
•Check the entire water filter
system for any loss of parts.
•Parts needed to install the water
filter are packaged in a plastic
bag. To avoid loss of the small
parts, keep them packaged until
you are ready to use them. Be
sure not to discard components
hidden in packaging.
✓
✓
All Point of Entry Whole House
models with backwash
programming.
Read all instructions carefully to learn the
details for installing and using your Whole
Home Municipal and Well Water Treatment
System. Failure to follow the Installation and
Operation Guide could cause injury and/or
property damage.
Select the location of your
water filter system with care.
For correct installation refer
to the appropriate diagram.
Various conditions which
contribute to proper location
are as follows:
•Do not locate the system
where the environment
would offer any risk of
water contamination.
•Do not put any liquid other
than water into the
system.
•Position the water filter
near main water supply
line, drain and electrical
outlet.
•Position so that main
water supply shutoff valve
is between water filter and
main water source.
•Turn off the water flow to
the house while installing
system.
•Select location where floor
is level. If floor is rough
and/or uneven, you can
level by placing tanks on
3/4" plywood, and shim to
level as needed.
•Install the water filter by
positioning it BEFORE the
water heater.
•Water temperatures
above 100°F (38°C) will
damage the water filter.
Use on cold water line
only.
•Allow sufficient space
around the installation
area for easy servicing.
•Provide a non-switched
110/120V, 60Hz power
source for the control
valve (automatic system).
PURE WATER TECHNOLOGIES, LLC | dba Wayde King Water Filtration™ www.KingWaterFiltration.com |
5502 S. Fort Apache Rd. Suite # 100, Las Vegas, NV 89148 | Customer Service Ph: 855.957.2166 | customerservice@kingwaterfiltration.com
4
MUNICIPALSYSTEM AUTOMATIC CONTROL VALVE PROGRAMMING
Clock MUST be set to 12:01 PM to get into
programming mode.
Step 1:Press and hold one of the up or down arrows until the clock
moves. Set the time to 12:01 PM. Push the Recycle button to set.
(recycle button)
Step 2:Press and hold the up and down buttons at the same time to
get into the Master Programming Mode. A pencil icon lets you know
you are in programming mode.
The code in the upper left shows the portion of the program being changed.
The up and down buttons change the value on the right.
Step 3:Screen upper
left reads DF. Set to GAL
Step 4:Push Recycle.
Set VT to FL tr
Step 5:Push Recycle.
Set CT to tc
Step 6:Push Recycle.
Set NT to ---1
Step 7:Push Recycle.
Set DO to 5
Step 8:Push Recycle.
Set RT to 2:00am
(Or whatever time
household is asleep)
Step 9:Push Recycle.
Set BW to 10
Step 10:Push Recycle.
Set RR to 10
Step 11:Push Recycle.
Wait for time to display…
Step 12:Press and
hold up or down arrow,
this gets time moving. Set
TD to correct time.
Push Recycle to
complete the setup.
[Parameter Display - Data Display] The portion of the program
displayed (shown in upper left) –the settings for that portion (on right).
[Parameter Display - ****] If you are seeing this, check to ensure all
settings are correct.
[TD - 11:08] Time of Day; current system time. To change, press and
hold the up OR down arrow until the programming icon is shown (pencil).
Use the up and down arrows to set the correct time. PM displays in the
upper right corner. Press Recycle to set.
[DO - 5] Day Override; the system will backwash after the number of
days set. Typically set no higher than 3 to ensure the media gets lifted
and cleaned.
[DF - GAL] Display Format = Gallons (GAL) Liters [Ltr] and Cubic
Meters [Cu] are alternative settings. However, all instructions are written
for Gallons.
[VT –FLtr] (FOR MUNICIPAL SYSTEMS) Valve Type = Filter (FLtr).
[CT - tc] Control Type = “Time Clock” sets the operation of the
controller. Backwashing systems are based on time, tc = time clock.
[NT --- 1] Number of tanks holding media for treatment.
[BW - 10] Backwash; the length of time the backwash runs in minutes.
Setting varies depending on system size.
PURE WATER TECHNOLOGIES, LLC | dba Wayde King Water Filtration™ www.KingWaterFiltration.com |
5502 S. Fort Apache Rd. Suite # 100, Las Vegas, NV 89148 | Customer Service Ph: 855.957.2166 | customerservice@kingwaterfiltration.com
5
TYPICAL INSTALLATION AND SYSTEM LOCATION
Whole House Water
Filter System
Installation
The system needs to be
installed by a licensed
plumber in your area.
City Water Inlet
Main Shut-off
Outside
Water
Backwash
line to drain
Water
Heater
Hot
Water
Cold Water
PURE WATER TECHNOLOGIES, LLC | dba Wayde King Water Filtration™ www.KingWaterFiltration.com |
5502 S. Fort Apache Rd. Suite # 100, Las Vegas, NV 89148 | Customer Service Ph: 855.957.2166 | customerservice@kingwaterfiltration.com
6
CONNECTING WATER FILTRATION SYSTEM TO WATER SUPPLY
•Turn off the main water shutoff valve.
•Open all plumbing fixtures in the house
including all outside faucets in order to
drain the lines of all water.
•Cut and remove a section of the main
incoming water line near where the
system is to be installed. Allow this line
to drain thoroughly (Fig 8).
•If copper piping is used and soldered,
remove the bypass from the valve
assembly and attach your plumbing
adapters to the bypass away from the
valve. This simple step will ensure that
you are not applying heat as you
solder, or pressure as you tighten the
adapters onto the bypass while they
are mounted on the valve body itself.
•Solder a 3” to 5” piece of copper pipe
into Each of the two pipe adapters
away from the valve, then let them cool
before threading each one onto the
yoke or bypass valve (Fig 9).
•Apply thread seal tape onto the male
adapters for the brass bypass valve
when cool, and securely tighten them
to the bypass valve. This is done
before reattaching them onto the rear
of the valve/meter body assembly.
•Close main water supply shutoff valve.
•Open nearest faucet to relieve
pressure and drain plumbing lines.
MINIMUM MATERIALS NEEDED
•¾” or 1” male thread adapters to plumb
the system
•Wrenches, either open end or
adjustable jaw, sized to fit compression
adapters
•Pipe cutter
•Thread seal tape
•Sandpaper or emery cloth
•Before installing ¾” or 1” fittings to the
inlet and outlet of the bypass valve or
manifold, wrap the threads 3 times
around with thread seal tape. Install ¾”
or 1” fittings.
•Soldering is no longer required to
plumb with copper pipe. Instead, use
¾” or 1” compression fittings. Connect
plumbing as shown below (Fig 10),
choosing appropriate connection for
mechanical/ automatic control valve.
CAUTION: Do not overtighten or
cross-thread.
CAUTION: Install water filter in
direction of arrows.
PURE WATER TECHNOLOGIES, LLC | dba Wayde King Water Filtration™ www.KingWaterFiltration.com |
5502 S. Fort Apache Rd. Suite # 100, Las Vegas, NV 89148 | Customer Service Ph: 855.957.2166 | customerservice@kingwaterfiltration.com
7
TIPS TO AVOID ACCIDENTAL
PROPERTY DAMAGE
INSTALLING A LEAK DETECTOR VALVE
Wayde King Water Filtration Whole Home
Filtration and Conditioning Systems use the
latest technologies available to ensure and
prevent water rupture. However, if manufacturing
guidelines are not followed, water damage can
occur. Causes of flooding include excessive
water pressure, spikes in water pressure, human
tampering, and negligent installation.
To eliminate possible water and property
damage, use the following preventative steps
and devices:
•A licensed plumber should install this unit,
reading and following the Installation and
Operation Guide as well as all notices.
•Install a water pressure regulator/control valve
inline to keep the water inflow pressure at 70
psi or less.
•Keep the water supply line from the extreme
heat or freezing. Temperature at unit location
should be maintained between 35° F and 120°
F.
•Install an inline flood prevention valve/leak
control –instructions at right.
•In addition to having all other safety devices,
use a ball valve to bypass the inflow of water to
the system during vacation.
Leak Controllers are specialized water alarm and shut-off systems
that use sensors to detect a water leak. The sensor sounds an
alarm and then shuts off your water. The alarm continues to sound
until the valve is manually reset. By preventing continuous water
flow, mold and property damage are restricted.
Features
•1” full port ball valve with auto shut-off
•Programmable service reminder indicator
•Water detection sensitivity down to 2ppm TDS (total dissolved
solids)
•4 AA alkaline batteries
•Automatic daily valve management
•Available port sizes (inlet/outlet) ¾”, 1”, 1-¼” and 1-½”
1. Install leak detector valve into an inlet water line.
2. Move sensor as close to filter as possible. Upon sensing
moisture, controller will engage the shutoff valve and sound
an alarm.
3. Secure controller module to the wall.
PURE WATER TECHNOLOGIES, LLC | dba Wayde King Water Filtration™ www.KingWaterFiltration.com |
5502 S. Fort Apache Rd. Suite # 100, Las Vegas, NV 89148 | Customer Service Ph: 855.957.2166 | customerservice@kingwaterfiltration.com
8
TROUBLESHOOTING
PROBLEM
CORRECTION
No water flow
•Re-read the instructions to install the system properly.
•Check the in and out arrows on the bypass valve to ensure the system is not piped backwards.
•Make sure the bypass valve is in the “Service” position.
Media discharging during
backwash
•Make sure top distributor has been installed properly.
System does not backwash
•Control valve not programmed properly.
Check programming and re-program as needed.
Poor performance (filtration)
•Check the frequency and period of backwashing.
Leak in distributor tube
•Put the system in bypass position and depressurize* the unit by putting into “Backwash”
position.
After prolonged periods of non-use
(such as during a vacation), it is
recommended that the system be
flushed thoroughly.
1. First put the system in bypass
by turning the bypass valve to
the “BYPASS” position.
2. Let water run for 10 to 20
minutes by opening all
faucets to flush all water
supply lines.
3. Turn handle on bypass valve
to “SERVICE” position to
backwash* the system.
* To backwash or depressurize the
system, refer to “Automatic Control
Valve Programming” in this
manual.
FREQUENTLY ASKED QUESTIONS
Will my whole house system affect water pressure?
As long as the appropriate sized system was installed for the house size and water demand, there should be very little change, or none
at all. If you think you may have purchased the wrong sized system, please contact us at 855-957-2166.
How do I perform a Master Reset on an automatic head?
1. Press and hold the ‘next cycle’ button on the controller and hold this button down while the power cable is plugged back in.
2. Continue to fold the ‘next cycle’ button for three seconds and then release it.
3. The Master Reset is now complete. You’ll need to program the softener now to your local conditions and reset the clock, r
‘Programming Automatic Control Valve’.
How can I do a manual backwash with an automatic head?
1. Press the Regeneration button and hold for 5 seconds until it says ‘BW’.
2. It will automatically begin a 10-minute backwash.
How do I set the time on my automatic valve head?
After completing the setup of your control head and exiting the settings menu, be sure to set the time clock to your current time using
the up and down arrow buttons. Once your correct time is selected, press the recycle button once to lock it in. The control head will use
the time set here as a basis for regulating your system’s backwash and regeneration functions.
Can I change my valve head?
A new valve head can always be purchased if you find yourself wanting a different functioning head. Please call us 855-957-2166.
I’m having issues with my media working properly, what should I do?
The answer most likely is water pressure that is too high, resulting in ineffective media because there is not enough contact time. The
prime fix is to slow down incoming water by installing a pressure regulator which allows the water more contact time with the media,
thus allowing the media to do its job more effectively. The same fix is for customers with very high native pressure that need to bring it
down to a constant 50-60 psi (recommended) in order to use our systems. Pressure Regulators are available in 1.25”, 1”, and ¾” for
purchase through Wayde King Water Filtration™. Please call 855-957-2166 to order.
PURE WATER TECHNOLOGIES, LLC | dba Wayde King Water Filtration™ www.KingWaterFiltration.com |
5502 S. Fort Apache Rd. Suite # 100, Las Vegas, NV 89148 | Customer Service Ph: 855.957.2166 | customerservice@kingwaterfiltration.com
9
SYSTEM BENEFITS AND FEATURES
The King Platinum whole home water treatment system is a 6-stage organic filtration system that uses redox bacteriostatic and
activated carbon media filtration to remove chlorine, harmful chemicals, and metals from your household water supply.
The King system is managed by an automatic control valve that is programmed to backwash, cleans the system out automatically, and
has been pre-set at our factory. These settings can be adjusted to your specific needs from the electronic control module timer. It will
retain its programming even in a power outage as it has battery backup. Our multi-polarity anti-scale magnet will protect your plumbing
and appliances from scale build-up and corrosion. As a matter of fact, it will not only prevent scale build up, but it will also help dissolve
existing scale formation. These magnetically ionized minerals will repel each other inhibiting their ability to bind to each other and to
plumbing equipment. In turn, it will make for easier cleaning, increase the life of your appliances, water heater, and plumbing
equipment. Being that our systems do not remove the healthy minerals they will assist in maintaining a healthy alkaline balance.
•Produces great tasting spring quality alkaline water from every faucet in your home.
•Maintains Healthy Minerals
•Removes Chlorine, Heavy Metals, and Volatile Organic Compounds
•American Made
•Maintenance Free Operation
•Controls Hard Water Scale
•Increases the life of your appliances and fixtures
•Industry Leading 20 Year Limited Warranty
•Eliminates the need for bottled water
•Eliminates the need for reverse osmosis drinking water systems
•Improves the taste and quality of food and drinks
•Softer and Healthier Hair and Skin
•No Salt and No Potassium
•Clothes and linens will last longer than when washed using municipally treated water
PURE WATER TECHNOLOGIES, LLC | dba Wayde King Water Filtration™ www.KingWaterFiltration.com |
5502 S. Fort Apache Rd. Suite # 100, Las Vegas, NV 89148 | Customer Service Ph: 855.957.2166 | customerservice@kingwaterfiltration.com
10
MEASURING SYSTEM EFFECTIVENESS
•Pure refreshing taste
•Your skin and hair will feel softer and less dry
•Soaps will lather more easily
•Less detergent in dishwasher when compared to municipal water
•Less detergent needed for washing clothes compared to municipal water
•Less spotting on dishes when compared to municipal water
•Clothes will be whiter and/or more vibrant in color due to the removal of chlorine
•The screens in your aerators on faucets and shower heads will start to remove existing scale
For Your Information
When testing for your water hardness, the healthy minerals will remain in the water, thus you will still have
what is commonly called “hard” water in most areas. The Wayde King water treatment system does not
remove these healthy minerals, but rather it treats these minerals so as that they are in a water soluble state.
Your water is scale-free, and easier to clean with, and lengthens the life of your plumbing and fixtures. Most
importantly, it will provide healthy, mineral-rich, spring-quality alkaline water for your household.
EVAPORATIVE SPOTTING
Being that the Wayde King Water Treatment Systems do not remove minerals from the water, there are times you may
notice minimal spotting if accumulated water is left to evaporate on surfaces such as shower doors or countertops. Our
system process will cause the minerals to lose their ability to adhere to most surfaces allowing any spotting to wipe off
easier than regular hard water or sodium spots caused by water softeners. Not to be confused with old-fashioned ion-
exchange water softeners that require regular maintenance and the recurring replacement of salt or potassium, our
maintenance-free system works differently. It does not remove the minerals (because minerals promote your good
health). Instead, it changes the minerals to water-soluble form that won’t stick to your plumbing or cause hard water
staining.
WARNING
Do not use with water that is microbiologically unsafe or of unknown origins without adequate
disinfection methods. To be used for the treatment of potable water only. Well water
applications require a water analysis be performed by an authorized testing facility.
If using a pacemaker, please keep at least 5 feet away from the water filtration system.
This product may contain a substance known to the state of California to cause
cancer, birth defects or other reproductive harm (CA Prop 65).
PURE WATER TECHNOLOGIES, LLC | dba Wayde King Water Filtration™ www.KingWaterFiltration.com |
5502 S. Fort Apache Rd. Suite # 100, Las Vegas, NV 89148 | Customer Service Ph: 855.957.2166 | customerservice@kingwaterfiltration.com
11
SHIPPING POLICY
Billing Information
Your credit card will be billed as “Pure Water Technologies”.
Free Shipping
Shipping is free for all Continental US orders over $999.99 (excluding Hawaii and Alaska).
Canadian Shipments
UPS charges you the receiver a brokers fee for any shipment that crosses the US border. Please note UPS is also
required in your location to collect GST/VAT on the value of your shipment.
Undeliverable Packages
Occasionally packages are returned to us as undeliverable. When the carrier returns an undeliverable package to us, we
will issue a refund minus shipping costs if the carrier is unable to deliver the package due to an address error that is not
through any fault of Pure Water Technologies LLC dba Wayde King Water Filtration.
We are unable to re-ship orders that are returned to us as undeliverable. If you would still like to purchase items that were
undeliverable, you are welcome to place a new order on our website. Please contact us if you suspect your order cannot
be delivered as addressed and you have not received confirmation of its return or refund after 4 weeks from the estimated
delivery date.
Refused Shipments
If an item is refused upon delivery at no fault of Pure Water Technologies LLC dba Wayde King Water Filtration, we may
at our own discretion, charge the customer return shipping fees. Pure Water Technologies LLC dba Wayde King Water
Filtration cannot be liable for the shipping charges if the item is refused before delivery. Freight packages that are refused
will be charged a 25% restock in addition to freight charges.
Tracking Shipments
Upon your order shipping, a tracking number will be emailed to the email address you provided on your order. Sometimes
tracking information won’t be immediately available. This may be due to the timing of tracking-database updates by the
carrier, or extenuating delays relating to your shipment. If you don’t see any tracking data for your shipment, please allow
up to 48 hours for our system to update and then contact customer service for additional information.
Damage/Lost Package Claims
All damage or lost package/item claims on deliveries must be made within 5 days of arrival to customers home for (Small
Package) shipments. Freight shipments should be inspected for damage upon arrival and reported to the freight driver
immediately. If damage is not noted on the delivery receipt prior to acceptance, Pure Water Technologies LLC dba Wayde
King Water Filtration can assume no liability for damages, however will give its best effort to process claim with the
shipping carrier.
Pure Water Technologies LLC dba Wayde King Water Filtration may request photos of the damage to give to the
designated freight company for inspection of the damage and to file a claim. Should any item arrive damaged or any item
be missing from your shipment, please contact customer service at 855-957-2166. Please note that lost package
investigations can take up to 30 business days to process, damage claims can take up to 90 business days to process.
Order Cancellation Policy
You can cancel your order for any item provided that the order has not yet entered the shipping process. If the item you
want to cancel has already entered the shipping process, it cannot be canceled by you or by our customer service
department. However, you can return the item for a refund, minus any and all shipping costs. To request cancellation of
your order please call Customer Service at 702-750-9800.
Cancellation requests are not accepted by email.
PURE WATER TECHNOLOGIES, LLC | dba Wayde King Water Filtration™ www.KingWaterFiltration.com |
5502 S. Fort Apache Rd. Suite # 100, Las Vegas, NV 89148 | Customer Service Ph: 855.957.2166 | customerservice@kingwaterfiltration.com
12
RETURN POLICY
General Return Policy
We will accept return of Wayde King Water Filtration brand items if unused and in their original condition within 30 days of
delivery for a full refund of your purchase price. Shipping and Brokerage charges are not refundable. Customers are
responsible for both delivery and return shipping/freight costs.
All returns will be inspected for completeness and damage. Some products have return restrictions. Please review the list
below to determine if special return policies apply to your products. Systems altered or changed from their original
manufacturer build and specs are not returnable. Taxes, brokerage, shipping, customs and border crossing fees on
shipments are not refundable.
30 Day Satisfaction Guarantee
Wayde King Water Filtration Whole Home Water Treatment Systems offer a 30 day satisfaction guarantee. Try these
products for 30 days and if you are not 100% satisfied, return the item to us for a 100% parts refund. All shipping charges
are the customers’ responsibility; Taxes, brokerage, customs and border crossing fees on international shipments are not
refundable; water must be within manufacturer specifications.
Custom/High Flow/Special Order Products
All custom, high flow, estate or special order products are built to order and cannot be returned once ordered.
Manufacturer warranties still apply to all custom systems.
Product Exchange
If you received a faulty item and need to exchange it for the same item, contact customer service to setup an exchange as
you will need to obtain an RMA number prior to return or exchange. Customer service will send you a prepaid return label
to have the faulty item returned or may set up a pick-up. Once customer service has confirmed the carrier has picked up
the faulty package or that it has been dropped off to the carrier, a new shipment will be sent.
If you would like to exchange an item for a different one, please return the original following our return policy and place
another order for the item you wish to purchase. You do not have to wait for us to receive the original item before placing
the new order.
Responsibilities and Limitations
Wayde King Water Filtration representatives will recommend an overall water filtration, treatment, and/or conditioning
system solution based upon all the information we receive by the customer. We cannot be responsible for a
recommended solution that falls short resulting from lack of information about any other extenuating conditions that exist
in the water that are not disclosed. Purchasers are advised that water quality conditions vary by area. Product
performance, pH levels and alkalinity may be affected by these variables, and for optimum performance purchasers
should verify prior to ordering that their local water quality falls within Pure Water Technologies LLC dba Wayde King
Water Filtration’s recommended specifications. Our representatives base all product recommendations on information
provided by the customers; if extenuating conditions (i.e. water, installation space, power, water pressure, etc.) exist
which were not disclosed, then additional and/or other products, services or equipment may be required. We are however
committed to working with our customers to help remedy any problems by providing them with the most effective and
affordable solutions available.
Pure Water Technologies LLC dba Wayde King Water Filtration’s is not financially responsible for any service, guarantees
or warranties that has resulted from improper installation, application, poor handling, neglect, set-up, start-up procedure
and/or lack of thorough follow through of installation procedures found on or with the unit and in any readily available
sources such as service guides, product manuals and/or related website pages.
PURE WATER TECHNOLOGIES, LLC | dba Wayde King Water Filtration™ www.KingWaterFiltration.com |
5502 S. Fort Apache Rd. Suite # 100, Las Vegas, NV 89148 | Customer Service Ph: 855.957.2166 | customerservice@kingwaterfiltration.com
13
RETURNS PROCEDURE
All returned products will be thoroughly inspected to determine overall condition of item being returned and if it complies
with our policies and procedures. Please verify the product you are returning meets the guidelines herein and qualifies for
return to avoid any delays, or denial of, processing your return. If a nonconforming product is accepted for return Pure
Water Technologies LLC dba Wayde King Water Filtration reserves the right to charge a restocking fee up to 25% at our
sole discretion. Return processing may take up to 10 business days from the time your product is received.
Return Merchandise Authorization Code
Returns will not be accepted without a valid Return Merchandise Authorization number (RMA). Unless otherwise specified
on our website or in our Return policy, you may request a Return Merchandise Authorization number (RMA) within 30
days of the original purchase date. RMA numbers expire after 30 days, however we encourage you to return the product
as soon possible. Any return we receive without a valid RMA number will be documented and rejected or subject to a
restocking charge at our sole discretion. Customers should call 855-957-2166 and speak with customer service to get the
RMA number. All returns must also contain all parts that were sent, along with all original packaging.
ALL Returns must have an authorized RMA before being returned or the return shipment may be refused by King Water
Filtration, LLC.
Return Shipping
Pure Water Technologies LLC dba Wayde King Water Filtration may, at our discretion, send you a pre-paid return label
for you to return your product. If you use this mailing label and the return is a result of our error (you received an incorrect
or defective item, etc.), we’ll pay the return shipping costs. If you use this mailing label and your return is not the result of
our error, the shipping cost of that returned item will be deducted from your refund. The amount deducted will be
equivalent to our standard shipping cost for that item.
For your protection, we recommend that you insure your return and obtain tracking information from the shipping carrier
that can provide you with delivery confirmation. Pure Water Technologies LLC dba Wayde King Water Filtration shall not
be responsible for any returned items that are lost or damaged in transit. Postage and handling charges, both to and from
our warehouse will be paid by the customer and are nonrefundable. At our discretion, we may reimburse shipping charges
related to the return of defective products inside the U.S. only.
Note: Any return that is not the result of our error will be subject to a restocking fee, which will be deducted from the
refund.
IMPORTANT RETURN NOTICE
If the product you are returning does NOT meet the requirements described in this document, we will photograph
the merchandise and packaging, and prepare a detailed summary of our determination as to why the return was
denied, the product(s) will be deemed not eligible for return and will be returned to you. If Pure Water
Technologies, LLC dba Wayde King Water Filtration, at our sole discretion, decides to accept a non-qualified item
for return, a restocking fee will be assessed of 20%.
PURE WATER TECHNOLOGIES, LLC | dba Wayde King Water Filtration™ www.KingWaterFiltration.com |
5502 S. Fort Apache Rd. Suite # 100, Las Vegas, NV 89148 | Customer Service Ph: 855.957.2166 | customerservice@kingwaterfiltration.com
14
PRODUCT WARRANTY INFORMATION
20 Year Warranty
Wayde King Water Filtration warrants to the end user (“customer”) that its tanks between (10” - 13” diameter), valves, bypass’s, fittings,
housings and all filtration media (“Covered Items”) will be free from defects in material and workmanship under normal use and service
for a period of 20 years when used in accordance with our recommendations. This warranty applies only to Whole Home Municipal
systems model #’s (WK-PLA-MUN-1054, WK-PLA-MUN-1354).
Limitations and Responsibilities
Wayde King Water Filtration’s obligation to the customer under these warranties shall be limited, at its option, to replacement or repair
of Covered Items by these warranties, labor is not covered. Prior to return or repair of Covered Items, the customer must obtain an
RMA (Return Merchandise Authorization) number from the company and at our sole option, return the Covered Items freight prepaid.
Any Covered Item repaired or replaced under these warranties will be returned prepaid standard freight to the original point of
shipment. Expedited freight options are available at customer expense.
No warranty is made with respect to defects or damaged due to neglect, misuse, alterations, accident, misapplication, physical damage,
or damaged caused by fire, acts of God, or freezing. These warranties apply only to the original purchaser so long as the purchaser
owns/lives in the home in which the unit was originally installed. Customer must register their system with Wayde King Water Filtration
LLC within 30 days of purchase* in order to obtain a warranty. Warranty will discontinue after the unit is removed from the location
where it was originally installed. Warranty begins on the date of delivery of product to the customer. Installation of any system on water
conditions outside of or beyond the recommended specs of any system voids any warranty. All warranties are non-transferable.
Wayde King Water Filtration, LLC gives this warranty to the customer in lieu of all other warranties, express or implied, including without
limitation any implied warranties of merchantability or fitness for a particular purpose or treatment of certain water and hereby expressly
disclaims all other such warranties. Pure Water Technologies LLC dba Wayde King Water Filtration’s liability hereunder shall not
exceed the cost of the product. Under no circumstances will Pure Water Technologies LLC dba Wayde King Water Filtration be liable
for any incidental or consequential damages or for any other loss, damage or expense of any kind, including loss of use, arising in
connection with the installation or use or inability to use the Covered Items or any water treatment system the Covered Items are
incorporated into. These warranties are governed by the laws of the state of Nevada and may change at any time without notice.
***Failure by California and Quebec residents to complete the product registration form does not forfeit their warranty rights,
however it is still highly recommended***
Wayde King Water Filtration’s trademarks and exchange dress may not be utilized as a part of association with any item or
administration that isn’t Pure Water Technologies LLC dba Wayde King Water Filtration the property of Wayde King Water Filtration
LLC in any way that is probably going to cause perplexity, or in any way that criticizes or disparages Wayde King Water Filtration. All
trademarks not possessed by Wayde King Water Filtration that show up are the property of their separate proprietors, who might be
partnered with, associated with, or supported by Wayde King Water Filtration, LLC.
PERFORMANCE GUARANTEE
Wayde King Water Filtration TM guarantees the performance of its products. Our guarantee assures the end user that appropriate
levels of contaminant are being removed and there is no leaching of toxins from any system components. This guarantee provides a
refund of the purchase price under the following conditions:
1. System recommendations will be provided by Wayde King Water FiltrationTM based on lab tests or a detailed description of the
existing water conditions as provided by the customer.
2. Filtration system is installed by a licensed plumber as recommended and is in operation for 30 to 90 days.
3. An independent third party laboratory test report is requested and provided at customer’s expense and chosen by Wayde King
Water FiltrationTM. If results indicate lack of performance, Wayde King Water FiltrationTM will research results of report,
installation procedures, and other relative details. Recommendations will be discussed and implemented at customer’s
expense based on researched cause of results. If subsequent testing shows satisfactory performance, Wayde King Water
FiltrationTM will reimburse the customer with replacement cartridges up to the cost of testing to have these results posted on
the Wayde King Water FiltrationTM website. All details on the report except city, state, zip code, and specific system description
would be excluded. If Wayde King Water FiltrationTM exhausts all attempts to increase the performance within a stated
reasonable time period and is unable to correct the issue, the Wayde King Water FiltrationTM will offer an RMA for return of
merchandise for refund.
FYI’s Regarding Magnetic
Ionization Salt Free Descaler
Tips, Suggestions, and Recommendations
Testing for Water Hardness and TDS (Total Dissolved Solids)
Wayde King’s Water Treatment Systems are designed to retain benecial healthy
minerals in your water. This helps provide healthy alkaline drinking water in
most cases. When testing for water hardness after installing one of our water
treatment systems, the water hardness will be unaffected. As our systems
descale your pipes, slightly higher hardness values may be noticed during
the rst few months of use as mineral deposits dissolve. Testing for water
hardness and/or TDS is not an effective way to test for overall water quality after
installation. The benecial minerals will raise the levels of hardness and TDS, but
will not cause the formation of scale as the minerals have been ionized.
Evaporative Spotting
Evaporative spotting may occur on faucets, showerheads, glass doors, and
other areas due to the retention of benecial minerals in your water. Our
magnetic ionizers will inhibit the minerals’ ability to form hard water scale.
Calcium Aragonite may cause evaporative spotting, however it will not form
hard water scale. This ionized mineral is much easier to wipe away than Calcium
Bicarbonate. This ensures easier cleaning and maintenance.
Dishwasher
If you are experiencing evaporative spotting on your dishes and glassware, we
recommend using a natural product by the name of Lemi-Shine. This is a liquid
rinse aid that will greatly reduce the healthy minerals ability to form spots on
your dishes. Lemi-Shine can be found at most grocery stores.
Shower Doors and Bathroom Mirrors
Many homes without the benet of a water conditioner over the years may
have hard water stain build up, glass etching, and scale formation. Thoroughly
cleaning your shower doors and xtures with a product called CLR or Lime-A-
Way is recommended to clear away previous scale and staining buildup. After
thoroughly cleaning the scale buildup we also recommend treating your glass
shower doors and mirrors with Rain-X to seal and protect the glass and help
the water cleanly rinse away. These products are available in most large general
merchandise stores. You will no longer experience that “slippery/slimy feeling”
when rising soap off in the shower. Instead you will experience a clean rinse with
water that is void of chlorine, maintaining the natural oils in your hair and skin.
This reduces the need for soaps, conditioners, and moisturizers while leaving
your hair and skin feeling soft and clean.
Wayde King Water Filtration
5502 S. Fort Apache #100 | Las Vegas, NV 89148
855-957-2166 | www.KingWaterFiltration.com
PURE WATER TECHNOLOGIES, LLC | dba Wayde King Water Filtration™ www.KingWaterFiltration.com |
5502 S. Fort Apache Rd. Suite # 100, Las Vegas, NV 89148 | Customer Service Ph: 855.957.2166 | customerservice@kingwaterfiltration.com
15
HOW TO SUBMIT A WARRANTY CLAIM
Date item(s) were
purchased:
Purchase Order No.:
Dealer purchased from:
Model:
Model/Serial Number:
Customer Name:
Street Address:
City, State, Zip Code:
Your phone number:
Plumbing Company
that installed the system:
Date Installed:
Plumber’s phone number:
KEEP THIS MANUAL FOR FUTURE REFERENCE AND
UNIT MAINTENANCE
Online Warranty Information:
https://KingWaterFiltration.com/warranty.htm
Product design is subject to change without notice.
For further assistance visit us at
www.KingWaterFiltration.com
To view the latest edition of the Whole Home Municipal
and Well Water Treatment Systems, visit
KingWaterFiltration.com
Please note all drawings, pictures, colors and sizes
are approximate for illustrative purposes only and
may not exactly resemble the end product.
WARRANTY REGISTRATION FORM
YOUR PURCHASE INFORMATION
You must submit your claim in writing within the warranty period
and within 3 business days period after the defect is discovered.
To initiate a claim, you should contact our warranty services
department at Wayde King Water FiltrationTM 5502 S. Fort
Apache #100 Las Vegas, NV 89148, Phone No. 855-957-2166
Complete this Warranty Registration Form to validate your warranty.
Wayde King Water Filtration Registration Form
NOTES:
____________________________________________
____________________________________________
____________________________________________
____________________________________________
____________________________________________
____________________________________________
____________________________________________
____________________________________________
____________________________________________
Please record the information below for your future reference
PLUMBER’S NAME PLUMBER’S ADDRESS PLUMBER’S PHONE
This manual suits for next models
2
Table of contents
Other Wayde King Water Filtration Water Filtration System manuals
Popular Water Filtration System manuals by other brands
B.David Company
B.David Company 4000Nanotechnology Installation & operation manual
Argo-Hytos
Argo-Hytos UMPCL 045 Lightline manual
Glacier bay
Glacier bay HDGROS4 Use and care guide
PureFlow AirDog
PureFlow AirDog FP-100-4G installation instructions
Grunbeck
Grunbeck GENO-UV Operation manual
CorroVenta
CorroVenta WS4 ES user manual
