Wayne-Dalton 3150C Assembly instructions

1
Look for the symbol for basic instructions.
Wireless Keychain
Remote Control
Model 3150C
Operating Instructions and
Owner’s Manual
Package Content....................................................................................................... 1
Warnings and Glossary ............................................................................................. 2
Setup.....................................................................................................................3-4
Examples.................................................................................................................. 5
Advanced Features ................................................................................................... 6
Troubleshooting .....................................................................................................6-7
Compliance .............................................................................................................. 8
Table of Contents
Control Garage Door Opener
and HomeSettings System
from your car
Thank you for purchasing the 3150C Wireless Keychain Remote Control. HomeSettings products by
Wayne-Dalton allow you to control your home by remote control. You can create a complete Home Control
and Access Network by combining your Wireless Keychain Remote Control with other
HomeSettings products. Indoor and outdoor lighting, security systems, garage door openers, and
thermostats are just a few of the items you can easily control with additional HomeSettings products.
Your new Wireless Keychain Remote Control is compatible with Wayne-Dalton garage door openers,
the Garage Door Opener Conversion Module and the Wireless Gateway to give you control of Z-Wave™
enabled modules.
Home Control Basics
HomeSettings products will allow you to easily control multiple devices in a home with the push of a button
in what is known as a “scene”. Turning on all of the lights as you come home is an example of a scene.
Dimming lights and closing your curtains to watch TV, it’s also a scene.
Visit www.wayne-dalton.com/access to get ideas on how to create scenes with your Remote Control and
other Z-Wave™ enabled HomeSettings products.
PACKAGE CONTENTS
User Manual
3150C Transmitter Visor Clip Key Chain Ring
Quick
Sta rt

Installation
Safety Precautions
Never let children operate or play with door controls. Keep remote controls away from
children. Fatal injury could result should a child become trapped between the door and the
floor.
Always keep moving door in sight and keep people and objects away until it is completely
closed. To prevent serious injury or death, avoid standing in the open doorway or walking
through the doorway while door is moving.
Warning
Definition of Symbol
2
Warning/Glossary
Copy – See Replicate.
Delete – Erase transmitter or SCENE information from Controller. Also known as Exclude.
Device – Any item that is connected to a module (for example, lamps).
Exclude – Remove a module from the controller.
Include – Add a module to the controller.
Module – Any HomeSettings or Z-Wave™ product that is controlled with a HomeSettings or
Z-Wave™ remote controller. A module can be part of more than one scene.
Network – A collection of devices controlled by primary or secondary controllers operating on the
same system. A network has its own unique identification code so that no one else can control
the system.
Operator – Garage Door Opener.
Primary Controller – The first controller used to set up your modules and network. NOTE:
Only the Primary Controller can be used to include or delete modules from a network. It is
recommended that you mark the primary controller for ease in modifying your network.
Replicate – Copy from one controller to another.
Scene – A scene is a series of Z-Wave™ modules programmed to turn to a specific level (on, off,
dim) with the push of a button on a controller.
Secondary Controller – A controller containing network information about other modules within
the network, and is created FROM the primary controller. Secondary controllers cannot include or
delete modules to the network.
Transmitter – Garage Door Opener transmitter.
GLOSSARY

3
NOTE: Any of the three transmitter buttons
can be programmed to activate the door. In
multi-door installations, each button can be
programmed to activate a separate door. Only
one button at a time (per-transmitter) can be
programmed to activate a door.
To program the transmitter:
1. Place the emergency disconnect handle in
the manual door operated position. This is for
safety reasons.
2. Press program button on DoorMaster™
light fixture, idrive®, pro drive™, Quantum™ or
Classicdrive™ operator. LED will light or idrive®
operator will beep once indicating that it is
ready to learn a transmitter.
3. Within 30 seconds, press and hold the
desired transmitter button(s); LED will turn
off or idrive®operator will beep once. On the
DoorMaster™ only, release the transmitter
button and press again. LED will light briefly
then turn off.
4. Return the emergency disconnect handle to
motor operated position.
5. Press same transmitter button(s) again; door
should operate.
Transmitter is now programmed to operator.
6. To OPERATE, press the transmitter button.
NOTE: idrive®model only: The first transmitter
command after programming will only open the
door through a six inch up/down cycle. Normal
door operation will then occur on all subsequent
transmitter commands.
Programming to Operator
Set-Up
TRANSMITTER
BUTTONS
IDRIVE®TORSION IDRIVE®TORQUEMASTER
DOORMASTER QUANTUMTM & CLASSIC &
PRODRIVE
PROGRAM
BUTTON
PROGRAM
BUTTON
PROGRAM
BUTTON
PROGRAM
BUTTON
Quick
Sta rt

4
Transmitter Buttons
Transmitter Buttons
Use the following procedure to program the
Wireless Keychain Remote transmitter button to
a SCENE button on the Wireless Gateway, WDHA-
12R. This procedure also is used to reassign a
transmitter button to a different SCENE button.
1. Press and Hold SCENE button you wish to
program, either Scene 1, 2 or 3, until the LED turns
off, then immediately release the SCENE button.
2. Press and hold the desired Transmitter button.
The LED on the Wireless Gateway will flash three
(3) times quickly to indicate the programming is
successful.
3. Release the transmitter button.
Note: Your Keychain Remote cannot directly operate
Z-Wave™modules, the Z-Wave™modules must
be programmed to the Gateway Scene to which you
have programmed your transmitter button.
4. To OPERATE, plug the Wireless Gateway into
AC power, then press the transmitter button
corresponding to the programmed SCENE which you
want to activate.
Best Practice Tip: Program the garage door opener
to a button by itself and SCENE’s to their own
transmitter buttons.
Use the following procedure to program the
Wireless Keychain Remote transmitter button to
a Wayne-Dalton Garage Door Opener Conversion
Module, Model WDRR-372R. This module will
allow your Keychain Remote Control to operate
any brand Garage Door Opener.
1. Install the Garage Door Opener Conversion
Module per the instructions provided with it.
2. Press and release the PROGRAM button on the
Conversion Module. The red indicator will turn on.
3. Press and release the desired transmitter button.
The Red LED indicator on the Conversion Module
will flash to indicate as successful operation.
6. To OPERATE, press the transmitter button
corresponding to the Conversion module.
Programming to Controller
Programming to Conversion Module
Scene 1
Scene 2
Scene 3
Delete
Copy
Choose 1
SCENE button
LED’s


Set-Up

Program Button
Red Indicator
Helpful hint: A broom handle can
be used to extend your reach for
depressing the program button.

Quick
Sta rt
Quick
Sta rt

5
The following examples describe how your
Wireless Gateway can be used. For further
ideas, please visit our website at www.
wayne-dalton.com/access.
1. Approaching your home in your car, you wish
to turn on the outside lights near the garage,
front door and rear door, as well as a lamps in
the kitchen and family room. Wireless Gateway
SCENE 1 can be programmed to turn all of these
lights ON. To operate SCENE 1 from your car,
you will also need to program one button of the
remote located in your car to SCENE 1.
2. In your car and leaving your home you wish
to turn off the outside lights near the garage,
front door and rear door, as well as interior lights
and appliances and also turn on your security
alarm. Wireless Gateway SCENE 2 can be
programmed to turn all of these modules OFF
and to turn ON the security alarm. To operate
SCENE 2 from your car, you will also need to
program one button of the remote located in
your car to SCENE 2.
3. Noises outside your home awaken you during
the night. SCENE 3 is programmed to turn on
only the outside lights. You can turn on SCENE 3
with your Keychain Remote from your bedroom
to illuminate the area and scaring off any
potential intruders.
4. Lights out! You have tucked your 2 children in
bed and one has your permission to read for 15
minutes while the other has your permission to
watch TV for 15 minutes. After 15 minutes you
want to turn off their lights and TV. SCENE 2 is
programmed to their bedroom lights, lamps and
to a TV in the childs room. Using your Keychain
Remote you can turn their lights and TV off.
Examples require the following modules:
1 - Wireless Gateway, WDHA-12R
1 - Keychain Remote, (3973C) or any built-in
vehicular remote control
3 -Dimmer Switch Module HA-06WD (for each
light switch)
2 - Lamp Module, HA-03WD (for lamp in kitchen
and family room)
1 - Wireless Gateway, WDHA-12R
1 - Keychain Remote, (3973C) or any built-in
vehicular remote control
3 -Dimmer Switch Module HA-06WD (for each
light switch)
2 - Lamp Module, HA-03WD (for lamp in kitchen
and family room)
1 - Wireless Gateway, WDHA-12R
1 - Keychain Remote, 3973C
3 -Dimmer Switch Module HA-06WD (for each
light switch)
2 - Lamp Module, HA-03WD (for lamp in kitchen
and family room)
1 - Wireless Gateway, WDHA-12R
1 - Keychain Remote, 3973C
2 -Dimmer Switch Module HA-06WD (for each
light switch)
2 - Lamp Module, HA-03WD (for lamp in kitchen
and family room)
1 - Appliance Module HA-02WD(for the TV)
Examples of Scenes
Examples

6
Use this procedure to program your Keychain
Remote for up to 6 actions.
In any of the previous programming instruc-
tions at the point where you need to activate a
transmitter button to complete the programming
step, simply simultaneously press a combina-
tion of any two buttons. Then to activate that
programmed action, simultaneously press those
two buttons.
Example of Use: Single Big button is pro-
grammed only to activate Garage Door Opener,
while each of the two smaller buttons are
programmed to SCENE 1 and 2 of the Gateway
Module. SCENE 3 of the Gateway module can
be programmed to activate by pressing the two
smaller buttons at the same time.
Problem:
• The range of the transmitter is reduced.
Button Combinations
Troubleshooting


Solution:
Replace Battery:
To change the batteries, insert a coin in the
coin slot and twist to access the battery
compartment. Your transmitter may use one
or two CR2016 batteries. Remove the batteries
from the battery cage and replace with fresh
batteries. Be sure to maintain the correct
polarity (+).
Coin Slot
Press 2 Transmitter buttons
at the same time
Advanced Features/Troubleshooting

7
Troubleshooting
Problem:
• One of my Wireless Gateway SCENES is not
working.
• My operator no longer works with my remote.
The Wayne Dalton Wireless Gateway can be
activated by up to 12 transmitter programs.
When exceeded the last one programmed will be
dropped.
The Wayne Dalton operator can be activated by
up to six remote control devices (including wall
station and keyless entry controls). If a seventh
control is programmed, one of the programmed
controls will be overwritten and will no longer
activate the operator. To clear the programming
of all remote control devices, press and hold
the DoorMaster™ light fixture program button,
idrive®, Quantum™ or Classic drive™ operator
program button for approximately ten seconds.
When the DoorMaster™, Quantum™, Classic
drive™ status LED goes out or idrive®operator
beeps three times, then all controls are erased.
Troubleshooting

FCC and IC Statement
You can reach us via email at [email protected] for Consumer Assistance
or online at www.wayne-dalton.com/access
© Copyright 2007 Wayne-Dalton Corp. Part No.0001766 RevA New 08/27/07
8
Compliance
FCC Regulatory Information:
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15
of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in
accordance with the instruction, may cause harmful interference to radio communications. However, there is no guarantee
that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the user is encouraged to try and correct
the interference by one or more of the following measures:
a) reorient or relocate the receiving antenna,
b) increase the separation between the equipment and receiver,
c) connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
IC Regulatory Information:
This Class B digital apparatus meets all requirements of the Canadian Interference Causing Equipment Regulations. Operation
is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept
any interference received, including interference that may cause undesired operation of the device.
Cet appareillage numérique de la classe B répond a toutes les exigences de l’interférence canadienne causant des règlements
d’équipement. L’opération est sujette aux deux conditions suivantes: (1) ce dispositif peut ne pas causer l’interférence nocive,
et (2) ce dispositif doit accepter n’importe quelle interférence reçue, y compris l’interférence qui peut causer l’opération peu
désirée.
WARNING: Changes or modications to this receiver not expressly approved by Wayne-Dalton Corp. could void the user’s
authority to operate this equipment.
Covered by one or more of the following Patents D413,055; D413,579; D413,867; D421,031;
D472,568; D472,910; D473,573; D473,574; D505,393; 5,929,580; 5,931,212; 6,078,249;
6,161,438; 6,145,570; 6,164,014; 6,325,134; 6,326,751; 6,326,754; 6,401,792; 6,561,255;
6,561,256; 6,568,454; 6,588,156; 6,605,910; 6,667,591; 6,739,372; 6,845,804; 6,851,465;
6,873,127; 6,880,609; 6,903,650. Other US and Foreign Patents pending.