MODEL
WBT-1200
SPECIFICATION DATE 2011-05-07
MAGNETICCARD READER PAGE
4/ 7
WORLDBRIDGEELECTRONICS - 4- http://www.wbe.com.cn
5.DIPSWITCH SETTING
Switchselection
SW1 Remain
SW2 AllowPC instructionsresponse
SW3 Track1/Track3change
SW4 Allowthebuzzeropen
SW5 Continuesalarm3timesaftererror
SW6 Add";", "+"beforeTrack 3selection
SW7 Allowtheframeworkcharacter(02H,03H)
SW8 Enterallows
Settings
SW2:Allow uppercomputerinstructionsresponse ON:[ allow]OFF:[ notallow];
SW3;Track1/Track3changeON:[ 1,3on]OFF: [1,3off]
SW4;“beep”soundafterswipecardON: [on]OFF: [off]
SW5;Continuesalarm3timesaftererrorON:[on]OFF: [off]
SW6;Add ";”,"+"beforeTrack 3ON:[add]OFF: [without]
SW7;AllowtheframeworkcharacterON: [allow]OFF: [notallow]
SW8;Add EnterON:[add]OFF: [without]
6. MAGNETIC STRIPEDATAFORMAT
6.1Detaileddescription
6.1.1Recorddensity: Track1,3210BPI，Track275/210BPIforoption
6.1.2Recordcapacity:
Track 1(less than79Characters)
Track 2(less than40Characters)
Track2(less than104Characters)
PS/2
HOSTRS-232WBT-1200
USB
7.INTERFACE
RS-232interface:
JP1RS-232Interface
PIN 1 GND
PIN 2 VCC (+5V)
PIN 3 TXD
PIN 4 RXD
JP2Interfaceofmagneticheadwire
PIN1 TK1-
