WEEE G Series User manual

WIFI TRAIL CAMERA
USER MANUAL
Please read this guide carefully before use and keep it well for future reference.
Android/IOS

1
5
6
7
8
9
10
11
12
2
3
4
Camera View ( G SERIES )
1. Strap hole
2. Lock hole
3. Fixing nut
4. DC interface
5. Lens
6. Infrared light
7. PIR indicator
8. WIFI Indicator
9. Microphone
10. PIR & sensor
11. Fixed button
12. PIR & sensor
3. LCD 1
4. 1SHOT button
5. 1Right button
. 16 Up button
. 17 MENU button
8. 1Left button(WiFi: ON/OFF)
19. REPLAY button
Down button20.
21. OK button
22. TF slot
23. USB interface
24. Switch ( ) ON / TEST / OFF
2 . Battery pack5
01
+
-
+
-
+
-
+
-
25
MENU
REPLAY
SHOT
OK
TF USB ON
TEST
OFF
22 23 24
13
14
15
16
17
18
19
20
21

Camera View ( K SERIES )
5
9
10
12
11
6
7
8
1
3
4
2
1. Strap hole
2. Lock hole
3. Fixing nut
4. DC interface
5. Infrared light
6. PIR indicator
7. WIFI Indicator
8. Microphone
9. Lens
10. PIR & sensor
11. Fixed button
12. PIR & sensor
3. LCD 1
4. 1SHOT button
5. 1Right button
. 16 Up button
. 17 MENU button
8. 1Left button(WiFi: ON/OFF)
19. REPLAY button
Down button20.
21. OK button
22. TF slot
23. USB interface
24. Switch ( ) ON / TEST / OFF
2 . Battery pack5
02
+
-
+
-
+
-
+
-
25
MENU
REPLAY
SHOT
OK
TF USB ON
TEST
OFF
22 23 24
13
14
15
16
17
18
19
20
21

Preparation before use
Manually shooting or recording under "TEST" mode
● Slide the switch to “TEST” position (The screen is on).
● Press Key ▲ or ▼ Key to quickly shift between photographing an videoing.
● Press Key “SHOT” to record or take a picture.
Mode
ON
TES T
OFF
Description
1. Monitoring mode.
1. Setup.
2. Manual shooting of photos or videos.
3. Check and replay.
1.Switch off camera.
Camera
Image
Video
time
SD
00:00:00
720
SD
TF
Card
00/00/00 00:00:00
Video Mode
Date Time
3.5mm
1.35mm
DC MATE PLUG
Camera
Image
16M
Picture
Quantity
9999
SD
TF
Card
Photo
size
Video
resolution
Photo Mode
Note: In the "TES T" mode, if you do not operate for a long time, the
camera will enter the power saving mode and the screen will shut down.
The screen can be turned on by pressing any button on the camera.
1.Power selection
1.1 Insert 8×1.5V AA battery into the battery
compartment.
1.2 When using the power adapter (optional)：At the
bottom of the camera,there is external power supply
port,which support DC12V 2A power,power plug size is
3.5X1.35mm.
2.Insert a micro SD storage card (Class 10 TF card,
FAT/FAT32）
Notes:
①.Be sure the camera is powered OFF before inserting
or removing SD cards or batteries
②.Please format the memory card before the first use.
3.Switch Function Introduction:
03
+
-
+
-
+
-
+
-
-
+
-
+
-
+
-
+
Adapter
TF
MENU
REPLAY
SHOT
OK

File operation in TF card
Menu Overview（Default parameters）
Follow steps below to preview photos or videos in your camera:
Step1: Slide the switch to “TEST” position (The screen is on).
Step2: Press “REPLAY” Key to enter the picture or video interface.
Step3: Press ◄ Keyand ► Key to select the photo or video to preview.
Step4: When playing a video, press the “OK” button to play or pause, press the
“MENU” button to exit the video playback.
Step5: Press “REPLAY” Key to exit.
Step1: Slide the switch to “TEST” position (The screen
is on);
Step2: Press "REPLAY" to enter TF card browsing →
Press the "MENU" key → Press "OK" to enter the delete
option → Press "OK" to confirm the settings, press
"MENU" to exit settings.
【Delete current file】to delete current file
【Delete all files】to delete all files
【Activate slide show】to slide show the files
【Write protect】to lock the files so that you can’t delete
them.The protected file has an icon“ ”.
Step3: Press “REPLAY” key to exit.
Browse photos/video
MENU
Back
OK
Select
Settings
Delete current file
Delete all files
Activate slide show
Write protect
04
Mode
PI R Level
PIR Interval
Capture Num
Video Length
ME NU Settings
Photo / Video / Photo+video
Middle / Low / High
1 / 2 / 3 (Continuous photo taking）
640x480P / 1280x720P / ...
Code
1
2
3
4
5
6
13
9
12
Audio Recording
Video Size
Language
8
English, Deutsch, Francais,
Italiano,日本語...
ME NU Settings
Code
The time interval between each trigger shooting
10
Set Clock YY/MM/DD 00:00
11
Stamp
Photo Size
14 Time Lapse Normal / TL video / Off
15 Timer Setting Start: 00:00 / Stop: 00:00
17 Camera Name
18 Security Code
19
20
Auto W IFI off
Wifi S SID
21 Wifi Password
22
Default
23
1 Min / 3 Min / 5 Min
12345678 (Initial)
Software
Format NO /Yes (Format TF card)
3 seconds - 10 minutes
Time & date / Date / Off
5M/ 8M/ 12M/ 16M/ 20M/ 24M/ ...
ON/OF F
TJ48K1W (Initial)
NO /Yes
Fileware version number
Auto / Near / Middle / Far
7IR distance
16 Loop Record ON/OF F
ON/OF F
ON/OF F

Setting of "TimeLapse"
Setting of "TimeSetting"
USB cable connection computer precautions
Step1: Slide the switch to“TEST”position (The screen
is on)；
Step2: Press“Menu”key to enter the setting interface；
Step3: Press ▲, ▼ to scroll through the setting options,
and the “OK” button to confirm the setting；
Step4: Press “MENU” key to exit.
You can browse, copy, and delete the images and videos on your computer
by connecting the camera to your computer with an USB cable. When using
the USB connection, make sure that the switch is on TEST mode.
MENU
Back
OK
Select
Time Lapse
Normal
TL video
Off
If you enable this function, the PIR Sensor of the
camera will be deactivated.
* Normal : According to the "Mode" setting, the
camera will take photos / videos / photo + video in
the time interval you set.
* TL vidwo : The camera will take photos at the time
interval you set. These photos will be formed to a
video.
You can enable it to set a working period for the
camera.It will enter the standby mode if the time is not
within the period.
* If the start time is earlier than the current time, the
setting will take effect the next day.
* If the start time is later than the current time, the setting
will take effect on the same day.
MENU
Back
OK
Select
Timer Setting
Timer Setting
Hr : Min
Start : 00 00
Stop : 00 00
1.The memory card cannot be formatted via USB when connected to the
computer.
2.Before connecting USB, please input the password if the camera is
setting.
MENU
Back
OK
Select
Settings
Mode
PI R Interval
PI R Level
Capture Num
Video Length
05

APP Installation
Before using the WIFI function, please install the A PP on the
smartphone device.
1.For Android smart phone, please go to Google Play
and search "Venari" to download and install it. For
IOS smart phone, please go to Apple Store and
search "Venari" to download and install it.
2. You can scan the below QR code to get the APP
“V ENA RI”. Android/IOS
WiFi Connection
1. Please turn on the camera, you can set the camera in TEST/ON
mode.
2.Before using the “VENA R I” APP, please make sure the phone's
Bluetooth and WiFi functions are turned on.
WIFI APP connection
06
Step 1: Turn on VENARI app,click “Connect device WIFI”
Note: During the connection process, VE NAR I may need to access
your location, pictures and other files. Please all select “ALLOW” or
“O K.”
Step 2: Select the corresponding Bluetooth name.(Hownic)
Step 3: Select “Auto Connect”, the APP will start automatically
connecting to
the cameraʼs WIFI hotspot soon.
Step 4: Waiting for 60s, the APP will connect the WIFI automatically.
Step 5: When connecting the W I FI function again, you can quickly
connect to the corresponding camera in "Device List”.
In the upper right corner of the “VENARI” APP, there is a “User
Guide”, There has full detailed steps about W IFI connection.For
better use of WI F I function, please see the “User Guide”.
Note:
1.When the WIFI is waiting for connection, WI FI status indicator will
flash frequently.
2.When the WIFI connected, the W IFI status indicator will flash once
every second.

07
Bluetooth list
Hownic 56:65:33:34:84
Cancel
TheAPPwill start connecting to the
camera’s WiFI hotspot soon
Auto Commect
Auto Connect:If you have not modified the
WiFi name (SSID) and password of the
camera,please select Auto Connect-the app
will use the default WiFi name (SSID) and
password of the camera to connect with the
camera.
Manual Connection
Connect manually:If the camera’s WiFi name
( S S I D ) a n d p a s s wo r d h av e b e e n
c h a n g e d , p l e a s e s e l e c t C o n n e c t
manually.Please select the camera’s WiFi name
(SSID) manually in the WLAN list in the system
settings and connect with the corresponding
password (the camera’s WiFi will take about 30
seconds to turn on, please be patient),and then
return to VENARI after successful connection.
Cancel
Waking up the camera
The camera is opening a WiFi
hotspot
Waking for the phone to join
59
CANCEL
VENARI
Connect device WiFi
No device connected
User Guide
Device List
TJ48K1W.123T Connect
Inactive
Add Camera
APP Operation
After successful connection, you can watch live video in the APP
choose to take photos/ record videos, change setup and download the
files to your phone, and manage the files in the APP menu.
Battery power
Photo interface
Video interface
Exit function
Shoot manually
Menu Settings
Delete
File browsing

Travel Path
YES
120°
130°
90°
30°
30°
Example:Mounting 120° total PIR angle
08
Setup the camera outdoor
Once all the setting has been done,the camera is ready for field
use:
● Mount the camera about 0.5-2m high with the camera pointed at
a slight downward angle.
● Keep the camera facing north or south NOT east or west due to
sunrise and sunset could produce false triggers and overexposed
images.
●Clear all obstructions in front of camera to avoid obscuring
camera lens or P IR sensor.Otherwise,the camera may be
triggered by mistake during windy or hot days.
● In order to avoid false triggers,you should adjust PIR sensitivity
depend on the object or wild animals;size,the speed and distance
of the movement.
● Installation of the Class 10 TF( microSD) card with FAT/FAT32
before setting up the camera.
● In order to avoid false triggers,you should adjust PIR sensitivity
depend on the object or wild animals;size,the speed and distance
of the movement.
● Installation of the Class 10 TF( microSD) card with FAT/FAT32
before setting up the camera.
● Make sure that time and date is correct.
● Make sure that the camera’s mode switch is “ON” mode(before
you leave).

FAQ
● Question: Are rechargeable batteries allowed?
Answer: No，because, rechargeable batteries are normally 1.2V, but
the camera needs at least a batter y pack of 8*1.5V batteries.
● Question: Why we sometimes shoot blank photos with no moving
targets in it?
Answer: The PIR sensor is very sensitive so that it will be triggered by
some environmental factors such as a piece of falling leaf when the
setting is at high level, so it is strongly recommended that the setting
should be made at the medium level.
● Question: Why some photos taken at night are very dark, which
seems that the IR L EDS were not working?
Answer: The I R LEDS have a high power consumption and will
become malfunctioning when the power of battery pack goes down.
This problem can be solved by replacing the batteries.
● Question: Why only photos are produced when the setting is for
both photos and videos?
Answer: There is a heavy power consumption when the video function
is started and the camera will only shoot photos with no videos if the
power of battery pack goes down. Please change batteries to ensure
normal working of the camera.
● Question: What shall we do if some menus are not selectable -
When the "TimeLapse" function is turned on, the "Video" and
"Photo+video" functions are not selectable.
Answer: Please turn off the "TimeLapse" function.
09