manuals.online logo
Brands
  1. Home
  2. •
  3. Brands
  4. •
  5. Weider
  6. •
  7. Home Gym
  8. •
  9. Weider 240 Tc Bench User manual

Weider 240 Tc Bench User manual

Other manuals for 240 Tc Bench

7

This manual suits for next models

1

Other Weider Home Gym manuals

Weider COBRA User manual

Weider

Weider COBRA User manual

Weider 9300 PRO User manual

Weider

Weider 9300 PRO User manual

Weider 9000 Bench User manual

Weider

Weider 9000 Bench User manual

Weider 8220hard Drive Sys User manual

Weider

Weider 8220hard Drive Sys User manual

Weider WSAW10011.0 User manual

Weider

Weider WSAW10011.0 User manual

Weider 340 Lc Bench Operating and maintenance manual

Weider

Weider 340 Lc Bench Operating and maintenance manual

Weider ADVANTAGE 831.153961 User manual

Weider

Weider ADVANTAGE 831.153961 User manual

Weider 9025 Quick start guide

Weider

Weider 9025 Quick start guide

Weider WECCSY24540 User manual

Weider

Weider WECCSY24540 User manual

Weider D136 User manual

Weider

Weider D136 User manual

Weider 1382 Series User manual

Weider

Weider 1382 Series User manual

Weider 8520 User manual

Weider

Weider 8520 User manual

Weider 184 Bench Operating and maintenance manual

Weider

Weider 184 Bench Operating and maintenance manual

Weider Sb4 Slant Board User manual

Weider

Weider Sb4 Slant Board User manual

Weider Flat Bench Sa 10-4 User manual

Weider

Weider Flat Bench Sa 10-4 User manual

Weider Powermax 70072 User manual

Weider

Weider Powermax 70072 User manual

Weider WESY20000 User manual

Weider

Weider WESY20000 User manual

Weider 9400 PRO User manual

Weider

Weider 9400 PRO User manual

Weider WEBE27320 User manual

Weider

Weider WEBE27320 User manual

Weider PRO 900 Quick start guide

Weider

Weider PRO 900 Quick start guide

Weider 170 Tc Bench Operating and maintenance manual

Weider

Weider 170 Tc Bench Operating and maintenance manual

Weider Pro 120 Bench System manual

Weider

Weider Pro 120 Bench System manual

Weider 831.159710 User manual

Weider

Weider 831.159710 User manual

Weider 325 Bench Operating and maintenance manual

Weider

Weider 325 Bench Operating and maintenance manual

Popular Home Gym manuals by other brands

T.D.S. 3501 Assembly instructions

T.D.S.

T.D.S. 3501 Assembly instructions

Body Solid EXM1950 Assembly instructions

Body Solid

Body Solid EXM1950 Assembly instructions

Horizon Fitness OXFORD 6 manual

Horizon Fitness

Horizon Fitness OXFORD 6 manual

Energetics Multi Trainer 5.1 owner's manual

Energetics

Energetics Multi Trainer 5.1 owner's manual

Precor Discovery Series owner's manual

Precor

Precor Discovery Series owner's manual

Matrix MG-PL Series Service manual

Matrix

Matrix MG-PL Series Service manual

Reebok Tbr2i Manuale d'istruzioni

Reebok

Reebok Tbr2i Manuale d'istruzioni

Pure Fitness 8526HE owner's manual

Pure Fitness

Pure Fitness 8526HE owner's manual

Bowflex Sport 001-6961 Assembly instructions

Bowflex

Bowflex Sport 001-6961 Assembly instructions

NordicTrack E8200 Competition Bench Bedienungsanleitung

NordicTrack

NordicTrack E8200 Competition Bench Bedienungsanleitung

Insportline RW600 user manual

Insportline

Insportline RW600 user manual

Body Solid GHYP-345 owner's manual

Body Solid

Body Solid GHYP-345 owner's manual

Evo TAHOE 5105 user manual

Evo

Evo TAHOE 5105 user manual

ParaBody 40 Assembly instructions

ParaBody

ParaBody 40 Assembly instructions

JLL Ventus Pro Air Power instruction manual

JLL

JLL Ventus Pro Air Power instruction manual

Trojan Colorado 370 user manual

Trojan

Trojan Colorado 370 user manual

Tunturi R25 owner's manual

Tunturi

Tunturi R25 owner's manual

Deltech Fitness DF102 Assembly instructions

Deltech Fitness

Deltech Fitness DF102 Assembly instructions

manuals.online logo
manuals.online logoBrands
  • About & Mission
  • Contact us
  • Privacy Policy
  • Terms and Conditions

Copyright 2025 Manuals.Online. All Rights Reserved.

Serial Number Decal
USERʼS MANUAL
CAUTION
Read all precautions and instruc-
tions in this manual before using
this equipment. Keep this manual
for future reference.
Model No. WEEVBE1409.0
Serial No.
Write the serial number in the
space above for reference.
www.iconeurope.com
QUESTIONS?
If you have questions, or if there are
missing parts, please contact us:
Call: 08457 089 009
From Ireland: 00 (44) 53 9236102
Website: www.iconsupport.eu
E-mail: [email protected]
Write:
ICON Health & Fitness, Ltd.
c/o HI Group PLC
Express Way
Whitwood, West Yorkshire
WF10 5Q
UK
2
WEIDER is a registered trademark of ICON IP, Inc.
TABLE OF CONTENTS
WARNINGDECALPLACE ENT ..............................................................2
I PORTANTPRECAUTIONS ................................................................3
BEFOREYOUBEGIN ......................................................................4
PARTIDENTIFICATIONCHART ..............................................................5
ASSE BLY ...............................................................................6
ADJUST ENT ...........................................................................13
EXERCISEGUIDELINES ...................................................................17
PARTLIST ..............................................................................18
EXPLODEDDRAWING ....................................................................19
ORDERINGREPLACE ENTPARTS ..................................................BackCover
WARNING DECAL PLACEMENT
This drawing shows the location(s) of the warning decal(s). If a decal is missing or illegible, see the
front cover of this manual and request a free replacement decal. Apply the decal in the location
shown. Note: The decal(s) may not be shown at actual size.
3
WARNING: To reduce the risk of serious injury, read all important precautions and
instructions in this manual and all warnings on your weight bench before using your weight bench.
ICON assumes no responsibility for personal injury or property damage sustained by or through the
use of this product.
1. Before beginning any exercise program,
consult your physician. This is especially
important for persons over age 35 or per-
sons with pre-existing health problems.
2.
Read all instructions in this manual
and all
warnings on the weight bench
before using
the weight bench. Use the weight bench only
as described in this manual.
3. It is the responsibility of the owner to ensure
that all users of the weight bench are ade-
quately informed of all precautions.
4. The weight bench is intended for home use
only. Do not use the weight bench in a com-
mercial, rental, or institutional setting.
5. Keep the weight
bench
indoors, away from
moisture and dust. Place the weight
bench
on a level surface, with a mat beneath it to
protect the floor or carpet. Make sure that
there is enough clearance around the weight
bench
to mount, dismount, and use it.
6. Inspect and properly tighten all parts regu-
larly. Replace any worn parts immediately.
7. Keep children under age 12 and pets away
from the weight bench at all times.
8. Keep hands and feet away from moving
parts.
9. Always wear athletic shoes for foot protec-
tion while exercising.
10. The weight bench is designed to support a
maximum user weight of 300 lbs. (136 kg)
and a maximum total weight of 460 lbs. (209
kg). Do not place more than 210 lbs. (95 kg),
including a barbell and weights, on the
weight rests. Do not place more than 70 lbs.
(32 kg) on the leg lever. Do not place more
than 50 lbs. (23 kg) on each fly arm. Do not
place more than 130 lbs. (59 kg) on the
weight carriage. Note: The weight bench
does not include a barbell or weights.
11. Always place equal amounts of weight on
both ends of your barbell when using it.
12. Do not use a barbell that is longer than 5 ft.
(1.5 m) with the weight bench.
13. When adding or removing weights, always
keep some weight on both ends of the bar-
bell and secure the barbell with the barbell
hooks to reduce the chances that the barbell
will tip.
14. When using the leg lever, place a barbell
with the same amount of weight on the
weight rests to balance the bench.
15. When using the backrest in an inclined posi-
tion or a level position, make sure that the
backrest support is inserted completely into
one of the sets of brackets on the uprights.
16. If you feel pain or dizziness while exercising,
stop immediately and cool down.
IMPORTANT PRECAUTIONS
4
Backrest
Weight Rest
Backrest Support
Fly Arm
Curl Knob
Barbell Hook
Upright
Upright Knob
Leg Lever
Weight Carriage
Lat Tower
Lat Bar
Cable
Weight Tube
Weight Tube
Frame Pin
Crossbar Knob
Thank you for selecting the new WEIDER®240 TC
weight bench. The weight bench offers a selection of
exercises designed to develop the major muscle
groups of the upper body. Whether your goal is to tone
your body, build dramatic muscle size and strength, or
improve your cardiovascular system, the weight bench
will help you to achieve the specific results you want.
For your benefit, read this manual carefully before
using the weight bench. If you have questions after
reading this manual, please see the front cover of this
manual. To help us assist you, note the product model
number and serial number before contacting us. The
model number and the location of the serial number
decal are shown on the front cover of this manual.
Before reading further, please look at the drawing
below and familiarize yourself with the parts that are
labeled.
Seat
BEFORE YOU BEGIN
ASSE BLED DI ENSIONS:
Height: 6 ft. 8 in. (202 cm)
Width: 5 ft. 7 in. (170 cm)
Depth: 4 ft. 4 in. (132 cm)
Curl Pad
5
Refer to the drawings below to identify small parts used in assembly. The number in parentheses by each draw-
ing is the key number of the part, from the PART LIST near the end of this manual. IMPORTANT: If you cannot
find a part in the hardware kit, check to see if it has been preassembled.
M10 Silver/Black
Locknut (34, 66)
M6 Washer (65)
M8 Washer (73)
M10 Black/Silver
Washer (64, 70)
M8 Locknut
(67)
M6 x 16mm
Screw (61)
M6 x 40mm Screw (62)
M10 x 52mm Carriage Bolt (74)
M4 x 16mm
Self-tapping
Screw (75)
M10 x 65mm Bolt (55)
M10 x 54mm Bolt Set (56)
M10 x 60mm Bolt (57)
M10 x 130mm Bolt (58)
M10 x 55mm Bolt (59)
M10 x 170mm Bolt (60)
M10 x 20mm
Bolt (63)
M10 x 70mm Bolt (71)
M8 x 58mm Bolt (72)
M10 x 57mm Carriage Bolt (68)
PART IDENTIFICATION CHART
6
ASSEMBLY
1.
Orient the Left Base (4) so that the recessed
holes are facing the floor.
Identify the Left Upright (6), which is marked
with a “Left” sticker. Attach the Left Upright to
the Left Base (4) with two 10 x 57mm
Carriage Bolts (68) and two 10 Black
Locknuts (66). Do not tighten the Black
Locknuts yet. Make sure that the nut is in
the position shown.
Attach the Right Upright (7) to the Right
Base (5) in the same way.
1
6
7
5
Nut
68
Recessed
Holes
4
Nut
66
66
Before beginning assembly, make sure
that you understand the information in
the box above.
To make assembly easier, carefully read the
following information and instructions:
•Assembly requires two persons.
• Because of its weight and size, the weight bench
should be assembled in the location where it will
be used. ake sure that there is enough clear-
ance to walk around the weight bench as you
assemble it.
• Place all parts in a cleared area and remove the
packing materials. Do not dispose of the packing
materials until assembly is completed.
• For help identifying small parts, use the PART
IDENTIFICATION CHART on page 5.
•The following tools (not included) may be required
for assembly:
two adjustable wrenches
one rubber mallet
one standard screwdriver
one Phillips screwdriver
Assembly may be more convenient if you have a
socket set, a set of open-end or closed-end
wrenches, or a set of ratchet wrenches.
2. Attach the Crossbar (12) to the Left Upright (6)
with two 10 x 65mm Bolts (55), two 10
Black Washers (64), and two 10 Black
Locknuts (66). Do not tighten the Black
Locknuts yet.
Attach the Crossbar (12) to the Right
Upright (7) in the same way.
See steps 1–2. Tighten the 10 Black
Locknuts (66).
2
12
7
66
66
64
55
6
7
3. Attach the Front Leg (2) to the Front Base (3)
with two 10 x 52mm Carriage Bolts (74) and
two 10 Black Locknuts (66).
3
66
66
74
2
3
4. Attach the Front Leg (2) to the Frame (1) with
two 10 x 60mm Bolts (57), two 10 x 55mm
Bolts (59), six 10 Black Washers (64), and
four 10 Black Locknuts (66).
4
2
66
64
64
64
66
59
57
1
5. Apply some of the included grease to an 10 x
70mm Bolt (71).
Attach the Frame (1) to the upper set of holes in
the bracket on the Crossbar (12) with the 10 x
70mm Bolt (71) and an 10 Black Locknut (66).
Then, tighten the Frame Knob (37) into the
bracket on the Crossbar (12) and the Frame (1).
See the inset drawing. Insert the Crossbar Pin
(29) into the lower set of holes in the Crossbar
(12).
Attach the Crossbar Pin (29) to the Crossbar
(12) with an 4 x 16mm Self-tapping Screw
(75).
71
Bracket
Grease
37
1
66 12
5
29
12
75
8
7
17
Bracket
6
Bracket
Pins
6
6. Orient the Backrest Support (17) so that the
pins are facing downward.
Set the Backrest Support (17) in one of the sets
of brackets on the Left and Right Uprights (6,
7).
7. Attach a Fly Arm Bumper (30) to the Left
Upright (6) with a Bumper Knob (50).
Attach the other Fly Arm Bumper (30) to the
Right Upright (7) in the same way.
8. Identify the Left Fly Arm (10), which has a pivot
tube on the indicated side.
Apply grease to an 10 x 130mm Bolt (58).
Attach the Left Fly Arm (10) to the Left Upright
(6) with the 10 x 130mm Bolt (58), an 10
Black Washer (64), and an 10 Black Locknut
(66).
Repeat this step for the other side of the
weight bench.
7
8
50
30
30 6
7
64
10
58
Pivot
Tube
Grease
6
66
9
9. Orient the Backrest (18) and the Backrest
Tubes (16) as shown. Make sure that the indi-
cated holes are in the location shown.
Attach the Backrest (18) to the Backrest Tubes
(16) with four 6 x 40mm Screws (62) and four
6 Washers (65). Do not tighten the Screws
yet.
9
18
Holes
16
62
62
65
10. Apply grease to an 10 x 170mm Bolt (60).
Attach the Backrest Tubes (16) to the welded
tube on the Frame (1) with the 10 x 170mm
Bolt (60), two 10 Black Washers (64), and an
10 Black Locknut (66).
See step 9. Tighten the 6 x 40mm Screws
(62).
60
Grease
64
64
66
16
1
10
11. Attach the Seat (19) to the Frame (1) with four
6 x 40mm Screws (62) and four 6
Washers (65).
11
1
65
65
62
19
65
10
12. Attach the Weight Tube (24) to the Leg Lever
(8) with an 8 x 58mm Bolt (72), two 8
Washers (73), a 13mm x 11.5mm Spacer (53),
and an 8 Locknut (67).
Next, press the Leg Lever Bumper (42) onto the
Weight Tube (24).
Apply grease to the barrel of an 10 x 54mm
Bolt Set (56).
Attach the Leg Lever (8) to the bracket on the
Front Leg (2) with the 10 x 54mm Bolt Set
(56). Make sure that the barrel of the Bolt
Set is inserted through both sides of the
bracket on the Front Leg.
12
56
72
56
8
24
73
73
53
42
2
Bracket
Grease
67
13. Insert a Long Pad Tube (54) into the indicated
hole in the Leg Lever (8).
Slide a Large Foam Pad (25) onto each end of
the Long Pad Tube (54). Then, press a Large
Pad Cap (46) into each Large Foam Pad.
Repeat this step with the other two Long
Pad Tubes (54).
13
46
8
25
54
54
54
25
46