Welcome Lightcloud Nano User manual

Nano
NANO/LCB

The Lightcloud Blue Nano is a versatile, compact
accessory that expands the available features offered
with Lightcloud Blue and RAB's compatible devices.
Connecting the Nano to a Lightcloud Blue system
improves features such as SmartShift™ circadian lighting
and schedules and enables premium features.
Improves SmartShift circadian lighting
Manual control on/off by clicking button once
Change CCT by double clicking button
Improves scheduling of Lightcloud Blue devices
Connect to 2.4GHz Wi-Fi network
Enables smart speaker integration

Download the app
Find a suitable location
Get the Lightcloud Blue app from the Apple® App
Store or Google® Play Store
Lightcloud Blue devices should be positioned
within 60 ft. of each other.
Building materials such as brick, concrete and steel
construction may require additional Lightcloud Blue
devices to extend around an obstruction.
Setup & Installation

Plug Nano into power
·
The Nano has a standard USB-A plug that can be
installed into any USB port, such as a laptop, USB
outlet, or power strips.
·
The Nano needs to have constant power in order
for it to operate as intended.
Each Site can host a maximum of one Nano.
Pair the Nano to the app
·

·
The Nano can manually turn all lighting devices
in a Site on or off by clicking the on board button
once.
·
By double clicking the button, the Nano will cycle
through different color temperatures with
compatible devices within the same Site.
Manual Control
Press and hold the center button on the Nano for 10s.
A flashing red light will appear to indicate the Nano
has been reset and then revert to a flashing blue
when the Nano is ready to pair.
Nano Reset
6
7
Connect the Nano to Wi-Fi
The Nano should be connected to a
2.4GHz Wi-Fi Network.

Solid Blue
Nano is paired to the Lightcloud Blue app
Nano has successfully established a Wi-Fi
connection with the 2.4GHz
Wi-Fi network.
Solid Green
Nano is ready to be paired to the Lightcloud
Blue app
Flashing Blue
Nano has been restored to default factory settings
Flashing Red
Nano is trying to establish a connection to a
2.4GHz Wi-Fi network.
Flashing Yellow
Nano Status Indicators

All configuration of Lightcloud Blue products may be
performed using the Lightcloud Blue app.
Functionality

Learn more at www.rablighting.com
©2022 RAB LIGHTING Inc.
Made in China
Pat. rablighting.com/ip