Wellturn T600 User manual

600 Yards Remote Dog Training Collar
Rechargeable & Waterproof & Portable Training
Collar with Static Shock, Vibration, Beep
Model Number: T600
WARNING
Do not use this product for your aggressive dog, or if your dog is prone
to aggressive behavior. Aggressive dogs may cause damage to the
people or things around. If you are unsure whether this product is
appropriate for your dog, please consult your veterinarian or certified
trainer.
CAUTION:
Risk of skin damage. Please read and follow the instructions. It is
important to use the collar correctly . Too tight for wearing may cause
skin damage.
*Avoid wearing the collar on the dog for more than 12 hours per day.
*If possible, reposition the collar every 1 to 2 hours.
*Check the collar to prevent excessive pressure, just follow the
instruction.
*Never connect a dog rope to the collar, it will cause excessive
pressure on the contact area.
*Wash the neck area of your dog and the contact area of the collar
weekly with a damp cloth.
*Examine the contact area of dog daily,lest rash or sore appears.
These cautions will help to keep your pet safe and comfortable.
Instruction Manual
1
Packing List:
1 X Remote
1 X Receiver with Nylon Belt
1 X USB Charging Cable
1 X Test Bulb
1 x User Manual

MAIN FEATURES
1. Brand-new Signal Wake-up Technology, battery standby time up to
90 Days.
2. Pioneering Design of Three different Tone Adjustment.
3. Humane Design-Maximum Static Stimulation Period is 5 seconds.
4. 3training modes: static shock/ vibration/ beep. 0-3 Adjustable
Intensity Levels for Tone; 0-8 Adjustable Intensity Levels for Vibration;
0-16 Adjustable Intensity Levels for Static Stimulation. If the level set
0, the mode is inhibited.
5. IPX6 Waterproof Receiver Collar and IPX5 Waterproof Transmitter.
6. The remote control distance of this product is 660 yards.
7. Two-dog model allows trainersto control two dogs from one
transmitter.
8. Rechargeable collar and transmitter.
1.LCD Screen:
The LCD Screen will display different modes of the collar and the different
channels for two collar receivers as well as battery indication.
Channel A/B will be desplayed on the screen
2.Static Shock Button: Pressing the “Static Shock”button, the receiver
will emit static shock. If set level 0 , NO shock
3.Vibration Button: Pressing the “Vibration” button, the
receiver will vibrate. If set level 0, NO vibration
4.Beep Button: Pressing the “Beep” button, the receiver will
emit beep sound.If set level 0, NO beep
5.Intensity Up/down Buttons: Selects intensity level of
beep,vibration and static Shock.
6. Channel Button: Pressing this “A B”button will shift channel
between the first and second collar receiver.
7.Charging Port: Insert charging cable into charging port to
charge the Transmitter.
8. Turn on/off the Receiver:Turn on/off the receiver by press the
“Power”button one time.
9. DV-5V Hole: Insert charging cable into DC-5V port to charge
the receiver.
DESCRIPTION
①
③
④
⑤⑥
⑦
⑧
⑨
①LCD Screen
②Static Shock Button
③Vibration Button
④Beep Button
⑤Intensity Up/down Button
⑥Channel Button
⑦Charging port
Power Button
DC-5V port
②
23
⑧
⑨

HOW TO USE
Note: Please charge before using the product!
1. Charge the Remote Transmitter:
1) Connect the charger cable to the charging port.
2) Plug the charger into a standard outlet.
3)The icon of battery will flash.
4) Charge the transmitter for about two hour for the first charge or
until the icon of battery stops flashing.
2. To turn the Transmitter on
1) Press any button to active the Transmitter. The backlight on.
2) Backlight will stay for about 5 seconds. if no operation then,
backlight off.
3) LCD display will stay for about 50 seconds. if no operation
then, LCD display shuts off.
3. Charge the Collar Receiver:
1) Connect the charger cable to the DC-5V port.
2) Plug the charger into a standard wall outlet.
3) The red light will flash on the receiver
(If not or green light ,please plug the charger again).
4) Charge the receiver for about two hour for the first charge or
until the light indicates charging complete.
4. To turn the Receiver Collar on
Press the power button once, the blue light will flash
5. To turn the Receiver Collar off.
Press the On/Off Button until the blue light is gone, it means the
receiver is turned off.
6.Connect Transmitter and Receiver
1) With the Receiver Collar off your pet, turn on the receiver collar.
2) Press the power button of receiver once again, the red light will
always on.
3) Press the TONE, VIBRA or Static Stimulation(any of them) on
remote, the blue light on receiver will flash, it indicates pairing is
completed.
4) Press the TONE button, the receiver receives the command and
makes a sound.
5) If the pairing were not successful, please repeat the 1-3 steps.
6) To match the second receiver, press the "A B"button and
select for the second receiver and follow the same procedure.
Two Dog System
NOTE: If you wish to add another Receiver Collar to the training
system, extra Receiver Collars are available where you bought
your unit.
7. How to use the Test Light
1) Turn the Receiver Collar on.
2) Hold the Test Light Contacts to the Contact Points.
3) Press the SHOCK Button on the Remote Transmitter.
4) The Test Light will flash.
Note: At higher Shock Levels, the Test Light will flash brighter.
5) Turn the Receiver Collar off.
Save the Test Light for future testing.
Note: If the Test Light does not flash, recharge the Receiver and re-
test.
45

How to Connect Transmitter and Receiver:
1.Turn on the transmitter
2.Turn on the receiver
3.Press the the “power” button
once again, the red light will
always on.
4.Press the TONE, VIBRA or Static Stimulation(any of them)
on remote, the blue light on receiver will flash, it indicates
pairing is completed.
Test bulb
Note:
1)If the pairing were not successful, please repeat the 1
-4 steps.
2) To match the second receiver, press the "A B"button
and select for the second receiver and follow the same
procedure.
3)If you wish to add another Receiver Collar to the
training system, extra Receiver Collars are available
where you bought your unit.
7
6

Important Notice:
1. The transmitter will be changed to Standby Mode if there is no
operationsafter 5 seconds .The receiver will be changed to
Standby Mode if there is no operations for 40 seconds. Any
commands from the transmitter will activate the receiver.
2.Press"A B"button for selection. Channel Acontrols the first
receiver and Channel Bcontrols the second receiver. Channel
A B controls both the two receiver.
3. The design of the receiver is rainproof. The rubber cover
has to be put in the right position to ensure rainproof effect.
4. Test static shock function
1) Place the Test bulb to the metal screws (ensure the mental
points are attached when test the shock function).
2) Press the “Static Shock" button, and the LED light will flash on.
5. How to find the best Vibration/Shock Level?
The level of Vibration/Shock best suited for your dog
depends on your dog’s temperament and threshold
for Vibration/Shock. Always start at the lowest level
and work your way up.
The appropriate level can be found when the dog
responds to the Vibration/Shock with a mild reaction,
such as a tensing of the neck muscles. The Vibration
/Shock Level may vary depending on the training
situation. When highly distracted, dogs will require a
higher level of Vibration/Shock
Frequently Asked Questions
Q：Is the Vibration/Shock safe for my pet?
A: While the Vibration/Shock is unpleasant, it is harmless to your
pet. Electronic training devices require interaction and training
from the owner to achieve desired results.
Q: How old does my pet have to be before using the Remote
Training Collar?
A: Your pet should be able to recognizebasic obedience
commands such as “Sit” or “Stay”. Pets should be at least 6
months old before using the Training Collar.
Q: Once my pet is trained and has been obeying my commands,
will he have to continue to wear the Receiver Collar?
A: Probably not. You may need to reinforce training with the
Receiver Collar from time to time.
Q: Is the Receiver Collar waterproof?
A: Yes.
Q: How long can I continuously deliver Vibration/ Shock to my pet?
A: The maximum amount of time you can press the Shock Button
and deliver Shock to your pet continuously is 5 seconds. And the
maximum amount of time you can press the Vibration Button
and deliver Vibration to your pet continuously is 10 seconds
After this, Vibration/Shock cannot be delivered until You release
and press the button again.
Q:How long should I process my training session for my pet?
A:Training sessions should be kept positive and short ,it is better
for about 10-15 minutes each time.
10 11

General Training Tips
The following tips will show you how to get the best performance
out of your Dog Training Collar.
(1) Make training sessions short and positive (about 10-15
minutes for each session.) This will enable the dog to
focuse on the trainer.
(2) Training one dog each time is recommended.
(3) During the first initial training sessions, keep the dog in a
familiar outdoor environment. Training in a place that the dog is
not familiar with may make the dog become distracted.
(4) Use a long leash fastened to a non-metallic collar to help the
dog to learn.Ensure that the additional collar and leash does
not interfere with the Contact Points of the Collar Receiver. Do
not use the remote training collar without a long leash
unless your dog is fully trained.
(5) More success will occur by teaching the dog a command first
before trying to reinforce the command with the Remote
Transmitter.
(6) For basic obedience training, vibration is more useful.
(7) Issue one obedience command each time, this will reduce
confusion and allow the dog to remain focused. Do not use
the training system for commands that the dog has not
learned.
(8) During training, look for all the positive changes in the dog's
behavior and remember to encourage it promptly with
ample praise and reward.
(9) Avoid over-correcting your dog.Use as less remote
correction as possible during the training process.
(10) When the dog has become apparently perplexed, shift the
focus of the training by drawing the dog's attention to a
command they have been familiar with.
Example: Tell the dog to sit and give abundant praise and
encouragement on successful completion of the sit
command.
(11) Do not use the training system to correct or eliminate
aggressive or biting behavior. When the dog is
showing signs of aggressive behavior, contact a professional
dog trainer in your local area immediately.
(12) Please keep in mind that training sessions should be kept
short. Stop Training and play with the dog when the dog
has made progress.
Common size of different dogs
Size Neck
Chest
Measureme
nt(cm)
Back
Lengt
h(cm)
Type
Mini 20-22 25-30 19 Chihuahua,
Yorkshire Temier
Small 20-24 29-36 23
Chihuahua,
Yorkshire Temier,
Poodle,
Pomerannian
Medium 23-28 35-42 28 Maltese Dog,
Shih Tzu
Large 27-31 41-47 31
Miniature
Schnauzer,
Pekingese
Large 30-34 46-53 35
Schnauzer,
English Cocker
Spaniel
Large 33-37 52-59 40 Beagle
Huge 43-48 76-84 60 Husky
12 13

FCCCaution
Thisdevice complieswithpart15 oftheFCCRules. Operation issubjecttothe
followingtwoconditions:(1)Thisdevice maynotcauseharmfulinterference,and (2)
thisdevice mustacceptanyinterferencereceived, including interferencethatmay
causeundesired operation.
AnyChangesormodifications notexpresslyapprovedbythepartyresponsiblefor
compliance could void theuser's authorityto operatetheequipment.
Note: Thisequipmenthasbeentestedand foundtocomplywiththelimitsforaClass
Bdigitaldevice,pursuanttopart15 oftheFCCRules. Theselimitsare designedto
providereasonableprotection againstharmfulinterferenceinaresidentialinstallation.
Thisequipmentgeneratesusesand canradiateradiofrequencyenergyand, ifnot
installedand usedinaccordancewiththeinstructions, maycauseharmfulinterference
toradiocommunications. However,there isno guaranteethatinterference will not
occurinaparticular installation. Ifthisequipmentdoescauseharmfulinterferenceto
radioortelevision reception, whichcanbedeterminedbyturning theequipmentoff
and on, theuser isencouragedtotrytocorrecttheinterferencebyoneormore ofthe
followingmeasures:
-Reorientorrelocatethereceivingantenna.
-Increasetheseparation between theequipmentand receiver.
-Connecttheequipmentintoanoutleton acircuit differentfromthattowhichthe
receiver is connected.
-Consult thedealer oranexperienced radio/TVtechnician forhelp.
Thedevice has been evaluated to meetgeneralRF exposure requirement.Thedevice
can beused in portableexposure condition withoutrestriction.