Weloveleds C350 User manual
WeLoveLeds\aa.Datasheets\PSUs\DATA_C350_RGB_Controller.ai
WeLoveLEDS.co.uk (part of The Sign Group) Victoria Works Bruntcliffe Road Morley Leeds West Yorkshire LS27 0LF
C350 RGB Controller
for RGB LED strips and modules
P1
DC 12V- D C 24V
6A/3C H
220W(12V)/440W(24V)
X
4096 level 3
37m o d es
16
16
30m with obstacle, 6 0m without obstacle
L176XW 46XH30(mm)
210g
levels
levels
R o H S
C onstant Voltage L E D R G B C ontroller
User Manual
( Please read through this manual carefully before use)
Welcome to use this RG B controller. It is a universal high-performance power controller
for entire color changing which adopted PW M(Pulse- W idth- Modulation) controlling
technology. C ontrols all common anode 4-pin 3- loop full color LE D lights such as: RG B full
color LE D module, LE D strip, LE D SMD tape and so on. It can be controlled by the remote
within the e ffective area no matter the direction and obstacles.
1. B rief Introduction
2. Specifications
Input voltage
O utput current
O utput power
Scale levels
Mode
Speed level
Brightness level
Remote control distance
Dimension
Weight
Model R otary R G B c ontroller
WeLoveLeds\aa.Datasheets\PSUs\DATA_C350_RGB_Controller.ai
WeLoveLEDS.co.uk (part of The Sign Group) Victoria Works Bruntcliffe Road Morley Leeds West Yorkshire LS27 0LF
C350 RGB Controller
for RGB LED strips and modules
P2
1)C onjunction diagram of LE D constant voltage strip
DC+
DC-
v+
R-
G -
B-
IN PU T: D C1 2V - 24V O U TPU T :6 A x3 CH
RGB CONTRO LLER
LED STRIP LED STRIP
1. D imension
2. C onjunction diagram
1. 37 changing modes such as skipping, s mooth..., R GB 4096 grey scale levels each.
2. LE D d igital tube indicate current mode, s peed, b rightness directly and simply.
3. Three dimming rotary knobs，DIY your favorite color. Lamplight soft and stable, without
flickers.
4. Save your DIY color automatically, c an be adjusted by remote control.
5. O ver-current protection, S hort-circuit protection
6. Work with power repeater, the power can be amplified unlimitedly.
7.Power loss momory function.
3. Function a nd feature
4. Safety w arnings
1. To ensure your safety and product properly usage, p lease read the user manual carefully.
2. To avoid installed the product in minefield, strong magnetic field and high voltage area.
3. To ensure the wiring is correct and firm avoiding short circuit damages to components and
cause fire.
4. Please install the product in a well ventilated area to ensure appropriate temperature
environment.
5. The product must be worked with DC c onstant voltage power supply.
Please check the consistence of input power with the product, if the output voltage of the
power comply with that of the product.
6. C onnect the wire with the power on is forbidden. E nsure proper wiring first then check to
ensure no short-circuit, then power on！
7. D on't repair it by yourself whenever an error occur. C ontact the supplier for any inquiry.
5. Installation a nd u sage
C O NS TA NT V O LTA G E
P O WE R SU P PL Y
176mm
46mm
DC+
DC-
v+
R-
G -
B-
INPUT:DC12V-24V OUTPUT:6Ax3CH
RGB CONTROLLER 100MM
39MM
PA US E
LE D C O N TR O L LE R
MO D E MO D E
SP E E D
SP E E D
BR T BR T
WeLoveLeds\aa.Datasheets\PSUs\DATA_C350_RGB_Controller.ai
WeLoveLEDS.co.uk (part of The Sign Group) Victoria Works Bruntcliffe Road Morley Leeds West Yorkshire LS27 0LF
C350 RGB Controller
for RGB LED strips and modules
P3
8
8
DC+
DC-
v+
R-
G -
B-
IN PU T :D C1 2V - 24 V O U TPU T :6 A x3 CH
RGB CONTR O LLER
3、O peration instruction
DC+
DC-
v+
R-
G -
B-
IN PU T :D C 12V - 24 V O U TP U T: 6A x3 CH
RGB CONTRO LLER
C O NS TA NT V O LTA G E
P O W E R SU P PL Y
LED STRIP LED STRIP
C O N STA NT V O LTA G E
PO W E R SUPPLY
LED STRIP LED STRIP
C O NSTANT V O LTA G E
PO W E R SUPPLY
LED STRIP LED STRIP
Three rotary knobs to dim Red, G reen and Blue colors, rotate the knobs the operation mode
shifts to mode 1 automatically. The LE D digital tubes shows the grey scale level of Red,
G reen and Blue under this mode.
The LE D digital tube indicates current mode, s peed and brightness.
Such as Mode1:
Static red
2) C onnect to power repeater (the controller and the amplifier can share the same power supply)
Synchronous line
Static green
WeLoveLeds\aa.Datasheets\PSUs\DATA_C350_RGB_Controller.ai
WeLoveLEDS.co.uk (part of The Sign Group) Victoria Works Bruntcliffe Road Morley Leeds West Yorkshire LS27 0LF
C350 RGB Controller
for RGB LED strips and modules
P4
PA U SE
LE D C O NTR O LLE R
MO D E MO D E
S PE E D
S PE E D
BRT BR T
Static blue
Dynamic mode:
M o d e 4 Speed level 10 Brig h tn ess le ve l 6
The 8 buttons on remote controller are：O N/O FF、PAUSE、MO DE +、MO D E -、SPE E D +、
SPE E D - 、BRT+、BRT- .
The r emote c ontrol ID l earning g uide: Press O N/O FF b utton till the light
flashes, then press PAUSE b utton, the light flashes again, the ID is set.
Sign B utto n
O N/O FF
PAUSE
MO D E +
MO D E -
SPE E D +
SPE E D
BRT+
BRT-
Description
O N/O F: Turn on/off the controller
Any button can start the controller at off status
PAUSE : Press this button will rest at current color,
press it again, w ill continue to change.
Mode+：Press this button to select next mode
Mode- Press this button & b ack to previous mode：
Speed+：speed up. Press this button to select 1-16
speed changing levels.
Speed-：speed down. Press this button to select 1-16
speed changing levels.
BRT+：Pre ss this button to select 1- 16 brightness
adjustment levels. B rightne ss up.
B R T-：Pre ss this button to sele ct 1- 16 brightne ss
adjustment leve ls.Brightne ss down.
PA U SE
MO D E
MO D E
BRT
BRT
S PE E D
S PE E D
When it is overload or short-circuits, the co ntroller automatically stop output, LE D display
twinkles and shows: “ E R R” , as below:
WeLoveLeds\aa.Datasheets\PSUs\DATA_C350_RGB_Controller.ai
WeLoveLEDS.co.uk (part of The Sign Group) Victoria Works Bruntcliffe Road Morley Leeds West Yorkshire LS27 0LF
C350 RGB Controller
for RGB LED strips and modules
P5
Tables of changing modes
6、E xception H andles
Malfunction
No Light
Wrong color
1.No power from the socket
2.Reverse connection ofpower +/-
3. Wrong or loose connection
4.RGB wrong wiring
5.Outputwire too long, voltage drops
7.Power supplier overloads
8.Controller overload
9.The setting of speed is too low
10.The battery has run down
11.Out ofthe controlling distance
Brightness of the
LED is not even
1.Check the socket
2.Modify the connection
3.Check connection
4.Re-wire RGB
5. Reduce cable or use loop connection
7.Change to another large power supplier
8.Add a power repeater
9.Press the button to increase speed
10.Change battery
11.Shorten the controlling distance
6.Wire diameter too slim, voltage drops 6.calculate the currentand change to a wider wire
Causation Solution
Model
Cyanfading
Whitefading
RGBfading
Redgreensmooth
Redbluesmooth
Greenbluesmooth
Redyellowsmooth
Greencyansmooth
Bluepurplesmooth
Redpurplesmooth
Bluecyansmooth
Redwhitesmooth
Greenwhitesmooth
1
2
3
4
5
6
7
8
9
10
11
12
13
14
DIYstaticcolor
Staticred
Staticgreen
Staticblue
Staticyellow
Staticpurple
Staticcyan
Staticwhite
3colorskipping
7colorskipping
Whitestrobe
RGBstrobe
7colorstrobe
Whitespeed-up
strobe
Mode not change
Can't be remote
controlled
Mode
No.
Brightness adjustable
Brightness adjustable
Brightness adjustable
Brightness adjustable
Brightness adjustable
Brightness adjustable
Brightness adjustable
Mode
No.
20
21
22
23
24
25
26
27
28
29
30
31
32
33
Model
Yellow purple
cyan smooth
Red fading
Green fading
15
16
Brightness, speedadjustable
Brightness, speed adjustable
Brightness, speedadjustable
Brightness, speed adjustable
Brightness, speed adjustable
Full color smooth
Cycle mode
Blue white smooth
34
35
36
37
White strobe increasingly
17
18
19
Blue fading
Yellow fading
Purple fading
Brightness, speedadjustable
Brightness, speedadjustable
Brightness, speedadjustable
Brightness, speedadjustable
Brightness, speedadjustable
Brightness, speedadjustable
Brightness, speedadjustable
Brightness, speedadjustable
Brightness, speedadjustable
Brightness, speedadjustable
Brightness, speedadjustable
Brightness, speedadjustable
Brightness, speedadjustable
Brightness, speedadjustable
Brightness, speedadjustable
Brightness, speedadjustable
Greenyellowsmooth
Brightness, speedadjustable
Brightness, speed adjustable
Brightness, speedadjustable
All recycling
Remark Remark
Brightness, speedadjustable
Brightness, speedadjustable
Brightness, speedadjustable
WeLoveLeds\aa.Datasheets\PSUs\DATA_C350_RGB_Controller.ai
WeLoveLEDS.co.uk (part of The Sign Group) Victoria Works Bruntcliffe Road Morley Leeds West Yorkshire LS27 0LF
C350 RGB Controller
for RGB LED strips and modules
P6
7. A fter S ales
From the day you purchase our products within 3 years, if being used properly in
accordance with the instruction, and quality problems occur, we provide free repair or
replacement services except the following cases:
1.Any defects caused by wrong operations.
2.Any damages caused by inappropriate power supply or abnormal voltage.
3.Any damages caused by unauthorized removal, maintenance, m odifying circuit, i ncorrect
connections and replacing chips.
4.Any damages due to transportation, b reaking, flooded water after the purchase.
5.Any damages caused by earthquake, fire, flood, lightning strike etc force majeure of
natural disasters.
6.Any damages caused by negligence, inappropriate storing at high temperature and
humidity environment or near harmful chemicals.
8. K indly R emind er
Power source must be D C constant voltage type of power supply. D ue to the e fficient output
in some power supplies are only 80% of total, so please select at least 20% higher output
power supply than the consumption of LE D l ights.
Power Source S election:
Table of contents
