Wen 73016 User manual

INSTRUCTION MANUAL
SPECIFICATIONS
MODEL 73016
CHROME PLATED BAR STOOL
300-POUND CAPACITY
WARNING: Read and understand all warnings, cautions and operating instructions
before using this device. Failure to follow all instructions listed below may result in
personal injury and device damage.
Model 73016
Maximum Capacity 300 pounds evenly distributed
Seat Height 29 inches
Support Ring Height 13.5 inches
Product Weight 14 pounds
Product Dimensions 14.5 in. x 14.5 in. x 29 in.
Chrome Plate Body
KNOW YOUR BAR STOOL
Support Ring
Padded Vinyl Cushion
Protective Foot Pad
1. OBSERVE work area conditions. Keep work area well lit.
2. ALWAYS keep your work area clean, uncluttered, and well lit. DO NOT work on floor surfaces
that are slippery with sawdust or wax.
3. USE THE RIGHT PRODUCT FOR THE JOB. There are certain applications for which this item
was designed. Do not modify it and do not use it for a purpose for which it was not intended.
4. CHECK FOR DAMAGED PARTS. Before using any product, any part that appears damaged
should be carefully checked to determine that it will operate properly and perform its intended
function. Check for any broken or damaged parts and any other conditions that may affect its
operation. Replace or repair damaged or worn parts immediately.
5. WHEN SERVICING use only identical replacement parts and accessories. Using any other parts
will void the warranty.
6. DO NOT operate the tool if you are under the influence of drugs, alcohol, or medication that
may affect your ability to properly use the tool.
7. DO NOT EXCEED THE PRODUCT’S MAXIMUM LOAD CAPACITY. Always keep weight evenly
distributed.
8. ONLY USE ON A FLAT SURFACE capable of supporting the item with its maximum capacity
load. It is easy to lose control if attempting to pull a load on a sloping or uneven surface.
9. DO NOT ALLOW CHILDREN TO PLAY ON, stand upon or climb on this item. It is not intended
for carrying people or animals.
10. ALWAYS CHECK HARDWARE and assembled parts after assembling. All connections should
be tight.
SAFETY INFORMATION
HAVE PRODUCT QUESTIONS? NEED TECHNICAL SUPPORT? Please feel free to contact us:
1-800-232-1195 (M-F 8AM-5PM CST) [email protected]
This item has a 2-year warranty - for the full warranty statement, please visit wenproducts.com.
Replacement parts and the most up-to-date instruction manuals can be found on wenproducts.com

ASSEMBLING THE BAR STOOL
1. Place the upper leg (Fig. 1 - 1) over the
lower leg (Fig 1 - 2).
2. Slide the support ring (Fig. 1 - 3) over the
leg assembly and secure with four M6x50
round head bolts (Fig. 1 - 4), washers (Fig. 1
-5), and nuts (Fig. 1 - 6).
NOTE: The round head bolts should be
inserted through the support ring first and
then the upper and lower legs.
3. Insert four M6x35 bolts (Fig. 2 - 1)
through the swivel plate (Fig. 2 - 2) and into
the corresponding holes on the legs. Secure
the bolts with four nuts and tighten.
4. Place the seat (Fig. 3 - 1) cushion face
down on a flat surface. Place the swivel
assembly (Fig. 3 - 2) on the bottom of the
seat so that the holes on the swivel line up
with the holes on the bottom of the seat.
6. Insert four M6x14 bolts (Fig. 3 - 3)
through the swivel plate and into the holes
on the bottom of the seat. Loosely secure
the bolts to the seat bottom to ensure proper
alignment. Once positioned, tighten the bolts
completely.
NOTE: Periodically check to make sure that
all bolts and nuts remain tightened. Do not
use the seat if any components are damaged
or loose.
INSTRUCTION MANUAL
ASSEMBLY
Fig. 1
Fig. 2
Fig. 3
1
2
3
4
5
1
2
1
2
3
No. Part No. Description Qty.
1 73014-01 Seat 1
2 73014-02 Swivel 1
3 73014-03 Flat Washer 12
4 73014-04 Round Phillips
Head Bolt M6x14 4
5 73014-05 Round Phillips
Head Bolt M6x35 4
6 73014-06 Nut M6 12
No. Part No. Description Qty.
7 73016-07 Lower Leg 1
8 73016-08 Upper Leg 1
9 73014-09 Round Phillips
Head Bolt M6x50 8
10 73014-10 Support Ring 1
11 73014-11 Foot Pad 4
EXPLODED VIEW & PARTS LIST
6
1
2
5
3
4
6
8
7
9
10
11