Wen 70711 User manual
OPERATOR’S MANUAL
10" Sliding
Compound
Miter Saw
Model # 70711
IMPORTANT
Your new tool has been engineered and manufactured to WEN’s® high standards for
dependability, ease of operation, and operator safety. Properly cared for, it will give you
years of rugged, trouble-free performance.
Pay close attention to the Rules for Safe Operation, Warnings, and Cautions. If you use your
tool properly and only for what it is intended, you will enjoy years of safe, reliable service.
We Got Your Back
It's not how, it's WEN the project get's done!
WenProducts.com
800- 232-1195
Got product questions or need technical support? Please feel free to contact us!
2
Table Of Contents
SECTION PAGE
3
10" Sliding Miter Saw Specications
Package Contents:
SPECIFICATIONS
4
Rules For Safe Operation
SYMBOL MEANING
Safety Alert Symbol:
NOTE:
IMPORTANT
WARNING -
5
General Instructions for all Power Tools
READ ALL INSTRUCTIONS!!!
6
WARNING -
7
WARNING -
WARNING - DO NOT OPERATE THIS TOOL WHILE UNDER
THE INFLUENCE OF DRUGS, ALCOHOL OR ANY MEDICA-
TION THAT MAY IMPAIR YOUR JUDGMENT OR CONTROL!
8
EXTENSION CORDS
AMERICAN WIRE GAUGE RATING CHART
9
GROUNDING INSTRUCTIONS
UNPACKING
WARNING -
WARNING -
NOTE
10
Before Operating Your Miter Saw
Only wear safety goggles that apply with ANSI Z87.1
To avoid injury from jams, slips or thrown pieces
WARNING -
Specic Safety Instructions for the 10" Miter Saw
11
Do not cut freehand
Do not cut more than one workpiece at a time
Be very careful when cutting odd shaped, extremely large or very small workpieces
To avoid contact with a rotating blade
To avoid injury from accidental starting of saw
12
To avoid injury from electrical shock
To avoid injury from a re hazard
When Operating Your Miter Saw
Before moving the saw
To avoid back injury
Whenever Your Miter Saw is Running
Prior to cutting a workpiece
WARNING
13
Allow movement of the waste portion of the workpiece
Avoid awkward hand position
Do not force the blade through the workpiece
Before removing obstructed material
After completing a cut
Motor Safety Protection
Before connecting the power cord to electrical outlet
ELECTRICAL REQUIREMENTS
WARNING
14
Use a separate electrical circuit for your tools.
Double Insulated
Replacement parts
WARNING -
WARNING -
15
Handle Latch
Components of a Miter Saw
ASSEMBLY
Attaching the Extension Supports and Miter Lock Handle
Attaching the Dust Collection Bag
MOUNTING THE SAW
Arbor Lock
16
WORK PIECE AND WORK AREA SET UP
GENERAL OPERATING INSTRUCTIONS
Operating Instructions
17
USING THE WORK PIECE EXTENSION SUPPORTS
ADJUSTING THE MITER ANGLE
ADJUSTING THE BEVEL ANGLE
18
USING THE DEPTH STOP
MAKING A CUT
19
Maintenance and Servicing
CLEANING, MAINTENANCE, AND LUBRICATION
BEFORE EACH USE
WARNING!
REPLACING THE BLADE
L
O
O
S
E
N
Figure 2
Figure 3
20
ADJUSTING THE FENCE
Figure 4
Figure 6
Figure 5
L
O
O
S
E
N
Table of contents
Other Wen Saw manuals
