Weslo Compact XS WETL20708.0 User manual

USER'S MANUAL
Model No. WETL20708.0
Serial No.
Write the serial number in the space
above for reference.
QUEST ONS?
As a manufacturer, we are commit-
ted to providing complete customer
satisfaction. If you have questions,
or if there are missing parts, please
contact us at the numbers or ad-
dresses listed below:
Call: 08457 089 009
Outside UK: 0 (44) 113 3877133
Fax: [phone]
E-mail: [email protected]
Write:
CON Health & Fitness, Ltd.
Unit 4
Revie Road ndustrial Estate
Revie Road, Beeston
Leeds, LS11 8JG
UK
CAUT ON
Read all precautions and instruc-
tions in this manual before using
this equipment. Save this manual
for future reference.
Serial Number
Decal

TABLE OF CONTENTS
WARNINGDECALPLACEMENT ..............................................................2
IMPORTANTPRECAUTIONS .................................................................3
BEFOREYOUBEGIN .......................................................................5
ASSEMBLY ...............................................................................6
OPERATIONANDADJUSTMENT ............................................................11
HOWTOFOLDANDMOVETHETREADMILL ..................................................15
TROUBLESHOOTING ......................................................................17
EXERCISEGUIDELINES ...................................................................19
PARTLIST ...............................................................................20
EXPLODEDDRAWING .....................................................................21
ORDERINGREPLACEMENTPARTS ..................................................BackCover
RECYCLINGINFORMATION .........................................................BackCover
2
WARN NG DECAL PLACEMENT
This drawing shows the locations of the warning
decals. f a decal is missing or illegible, call
the telephone number on the front cover of
this manual and request a free replacement
decal. Apply the decal in the location shown.
Note: The decals may not be shown at actual
size.
WESLO is a registered trademark of ICON IP, Inc.

3
1. Before beginning this or any exercise pro-
gram, consult your physician. This is espe-
cially important for persons over age 35 or
persons with pre-existing health problems.
2. t is the responsibility of the owner to ensure
that all users of this treadmill are adequately
informed of all warnings and precautions.
3. Use the treadmill only as described in this
manual.
4. Place the treadmill on a level surface, with at
least 8 ft. (2.4 m) of clearance behind it and
2 ft. (0.6 m) on each side. Do not place the
treadmill on a surface that blocks any air
openings. To protect the floor or carpet from
damage, place a mat under the treadmill.
5. Keep the treadmill indoors, away from mois-
ture and dust. Do not put the treadmill in a
garage or covered patio, or near water.
6. Do not operate the treadmill where aerosol
products are used or where oxygen is being
administered.
7. Keep children under age 12 and pets away
from the treadmill at all times.
8. The treadmill should be used only by per-
sons weighing 265 lbs. (120 kg) or less.
9. Never allow more than one person on the
treadmill at a time.
10. Wear appropriate exercise clothes while
using the treadmill. Do not wear loose
clothes that could become caught in the
treadmill. Athletic support clothes are recom-
mended for both men and women.
Always
wear athletic shoes; never use the treadmill
with bare feet, wearing only stockings, or in
sandals.
11. When connecting the power cord (see page
11), plug the power cord into an earthed cir-
cuit. No other appliance should be on the
same circuit. When replacing the fuse, an
ASTA approved BS1362 type should be fitted
to the fuse carrier. A 13 amp fuse should be
used.
12. f an extension cord is needed, use only a 3-
conductor, 14-gauge (1 mm2) cord that is no
longer than 5 ft. (1.5 m).
13. Keep the power cord away from heated sur-
faces.
14. Never move the walking belt while the power
is turned off. Do not operate the treadmill if
the power cord or plug is damaged, or if the
treadmill is not working properly. (See TROU-
BLESHOOT NG on page 17 if the treadmill is
not working properly.)
15. Read, understand, and test the emergency
stop procedure before using the treadmill
(see page 12).
16. Never start the treadmill while you are stand-
ing on the walking belt. Always hold the
handrails while using the treadmill.
17. The treadmill is capable of high speeds.
Adjust the speed in small increments to
avoid sudden jumps in speed.
18. Never leave the treadmill unattended while it
is running. Always remove the key, unplug
the power cord, and switch the reset/off cir-
cuit breaker to the off position when the
treadmill is not in use. (See the drawing on
page 5 for the location of the reset/off circuit
breaker.)
19. The pulse sensor is not a medical device.
Various factors, including your movement,
may affect the accuracy of heart rate readings.
The pulse sensor is intended only as an exer-
cise aid in determining heart rate trends in
general.
MPORTANT PRECAUT ONS
WARN NG: To reduce the risk of serious injury, read all important precautions and in-
structions in this manual and all warnings on your treadmill before using your treadmill. CON as-
sumes no responsibility for personal injury or property damage sustained by or through the use of
this product.

4
20. Do not attempt to raise, lower, or move the
treadmill until it is properly assembled. (See
ASSEMBLY on page 6, and HOW TO FOLD
AND MOVE THE TREADM LL on page 15.)
You must be able to safely lift 45 lbs. (20 kg)
to raise, lower, or move the treadmill.
21. When folding or moving the treadmill, make
sure that the storage latch is holding the
frame securely in the storage position.
22. Do not change the incline of the treadmill by
placing objects under the treadmill.
23. nspect and properly tighten all parts of the
treadmill regularly.
24. Never drop or insert any object into any
opening on the treadmill.
25. DANGER: Always unplug the power
cord immediately after use, before cleaning
the treadmill, and before performing the
maintenance and adjustment procedures de-
scribed in this manual. Never remove the
motor hood unless instructed to do so by an
authorized service representative. Servicing
other than the procedures in this manual
should be performed by an authorized ser-
vice representative only.
26. This treadmill is intended for in-home use
only. Do not use this treadmill in any com-
mercial, rental, or institutional setting.
SAVE THESE NSTRUCT ONS

5
Thank you for selecting the new WESLO®COMPACT
XS treadmill. The COMPACT XS treadmill offers a se-
lection of features designed to make your workouts at
home more effective. And when youʼre not exercising,
the unique treadmill can be folded up, requiring less
than half the floor space of other treadmills.
For your benefit, read this manual carefully before
using the treadmill. If you have questions after read-
ing this manual, please see the front cover of this man-
ual. To help us assist you, note the product model
number and serial number before contacting us. The
model number and the location of the serial number
decal are shown on the front cover of this manual.
Before reading further, please review the drawing
below and familiarize yourself with the labeled parts.
BEFORE YOU BEG N
Handrail
Console
ey/Clip
Reset/Off
Circuit Breaker
Walking Belt
Motor Hood
Latch nob
Foot Rail
Idler Roller
Adjustment Bolts
Leveling Feet
Incline Leg

6
M8 Star
Washer (5)–6
1/4" Star
Washer (4)–2
M4.2 x 12mm
Screw (3)–4 M6 x 10mm
Bolt (2)–2 M8 x 16mm
Bolt (1)–6
M4.2 x 12mm
Hood Screw (30)–1
ASSEMBLY
Assembly requires two persons. Set the treadmill in a cleared area and remove all packing materials; do not
dispose of the packing materials until assembly is completed. Note: The underside of the treadmill walking
belt is coated with high-performance lubricant. During shipping, a small amount of lubricant may be transferred to
the top of the walking belt or the shipping carton. This does not affect treadmill performance. If there is lubricant
on top of the walking belt, simply wipe off the lubricant with a soft cloth and a mild, non-abrasive cleaner.
Assembly requires the included hex keys and your own Phillips screwdriver ,
adjustable wrench , and wire cutters .
Use the drawings below to identify the assembly hardware. The number in parentheses below each drawing is
the key number of the part, from the PART LIST near the end of this manual. The number after the parentheses
is the quantity needed for assembly. Note: f a part is not in the hardware kit, check to see if it is preattached
to one of the parts to be assembled. To avoid damaging plastic parts, do not use power tools for assem-
bly. Extra hardware may be included.

1. Identify the Right Handrail (86), which is marked
with a sticker. Have a second person hold the
Right Handrail near the tube on the Base (79).
See the inset drawing. Tie the wire tie in the
Right Handrail securely around the end of the
Wire Harness (84). Then, pull the other end of
the wire tie until the Wire Harness is routed
completely through the Right Handrail.
Gently pull on the Wire Harness (84) while slid-
ing the Right Handrail (86) down into the tube
on the Base (79). Make sure not to pinch the
Wire Harness.
Attach the Right Handrail (86) to the Base (79)
with two M8 x 16mm Bolts (1) and two M8 Star
Washers (5); do not fully tighten the Bolts
yet. Be careful not to pinch the Wire Harness
(84).
Attach the Left Handrail (34) to the Base (79)
with two M8 x 16mm Bolts (1) and two M8 Star
Washers (5); do not fully tighten the Bolts
yet.
Remove the wire tie from the Wire Harness (84).
1
2. Orient the Handrail Crossbar (83) as shown.
See the inset drawing in step 1. Tie the wire tie
in the Handrail Crossbar securely around the
end of the Wire Harness (84). Then, pull the
other end of the wire tie until the Wire Harness
is routed completely through the Handrail
Crossbar.
Gently pull on the Wire Harness (84) while in-
serting the Handrail Crossbar (83) down into the
Handrails (34, 86). Make sure not to pinch the
Wire Harness.
Attach the Handrail Crossbar (83) with two M6 x
10mm Bolts (2) and two 1/4" Star Washers (4);
do not fully tighten the Bolts yet. You may
need to push the Foam Grips (85) down slightly.
2
7
86
83
84
34
84
Wire Tie
86
84
86
Wire
Tie 51
1
5
34
79
2
Wire Tie
4
2
4
Hole
85
85

4. Remove the console back and the four M4.2 x
12mm Screws (3) from the Console (80). Save
the console back and the Screws for step 6.
Hold the Console (80) near the Console Plate
(81). Touch the Console Plate to discharge
any static.
Next, press the connector on the end of the
Wire Harness (84) into the connector on the
back of the Console (80) in the location shown.
See the inset drawing. The connectors
should slide together easily and snap into
place. If they do not, turn the connector on the
Wire Harness and try again. F THE CONNEC-
TORS ARE NOT CONNECTED PROPERLY,
THE CONSOLE MAY BE DAMAGED WHEN
THE POWER S TURNED ON.
4
8
Connector
80
84 81
84
Connectors
3. Attach the Console Plate (81) to the Handrail
Crossbar (83) with two M8 x 16mm Bolts (1) and
two M8 Star Washers (5). Make sure the
Console Plate is oriented as shown and that
the Wire Harness (84) is not pinched.
Remove the wire tie from the Wire Harness (84).
3
83 81
1
1
Wire Tie
84
5
5
Console
Back
3
3

9
6. Attach the console back to the Console (80) with
the four M4.2 x 12mm Screws (3) that you re-
moved in step 4.
See step 1. Tighten the two M8 x 16mm Bolts
(1) on each side of the treadmill.
See step 2. Tighten the M6 x 10mm Bolt (2) on
each side of the treadmill.
6
80
Console Back
3
3
5. Set the Console (80) on the Console Plate (81),
and insert the excess wire into the Handrail
Crossbar (83). Make sure that no wires are
pinched.
Attach the Console (80) with four M4.2 x 12mm
Screws (3); start all four Screws before tight-
ening any of them.
5
80
83
81
3
7. Tighten a M4.2 x 12mm Hood Screw (30) into
the Motor Hood (53). 7
53
30

10. Make sure that all parts are properly tightened before you use the treadmill. If there are sheets of clear
plastic on the treadmill decals, remove the plastic. To protect the floor or carpet, place a mat under the tread-
mill. Note: Extra hardware may be included. eep the included hex keys in a secure place; one of the hex
keys is used to adjust the walking belt (see page 18).
9. Position the cylinder end of the Gas Spring (76)
near the bracket on the Base (79).
Remove the Gas Spring Clip (77) from the end
of the Gas Spring (76) as described in step 8. If
necessary, rotate the Gas Spring to align the
end of the Gas Spring with the ball on the
bracket on the Base (79).
See the lower drawing. Press the end of the
Gas Spring (76) onto the ball on the bracket.
Note: t may be necessary to pull the Latch
Knob (70) to the right and move the Frame
(87) forward or backward as you press the
Gas Spring onto the ball.
Next, insert the end of the Gas Spring Clip (77)
into two of the small holes in the end of the Gas
Spring (76). Then, rotate the Gas Spring Clip
until it clips onto the Gas Spring.
Lower the Frame (87) to the floor. See HOW TO
LOWER THE TREADMILL FOR USE on page 16.
Make sure that the four Leveling Feet (not
shown) rest firmly on the floor (see HOW TO
LEVEL THE TREADMILL on page 14).
76
77
76
77
87
Bracket
Bracket
77
77
8. Raise the Frame (see HOW TO FOLD THE
TREADMILL FOR STORAGE on page 15). Be
careful not to crack the Motor Hood (not
shown).
Raise the Gas Spring (76) to a vertical position
with the cylinder on the bottom as shown. See
the two small inset drawings. Using your fin-
gernail or the end of a screwdriver, press on the
end of the Gas Spring Clip (77) to loosen it from
the Gas Spring. Next, rotate the Gas Spring Clip
and pull it out of the Gas Spring. Be careful to
avoid losing the Gas Spring Clip. Note: Extra
Gas Spring Clips are included.
Then, press the end of the Gas Spring (76) onto
the ball on the bracket on the Frame (87). See
the lower drawing. Insert the Gas Spring Clip
(77) into the two indicated small holes in the end
of the Gas Spring. Then, rotate the Gas Spring
Clip until it clips onto the Gas Spring.
77
76
Holes
77
76
9
Bracket
Holes
10
79
Cylinder
70
87
8
70