Weslo WLTL99315.0 User manual

USER’S MANUAL
Model No. WLTL99315.0
Serial No.
Write the serial number in the space
above for future reference.
CAUTION
Read all precautions and instruc-
tions in this manual before using
this equipment. Save this manual
for future reference.
Serial
Number
Decal
www.weslo.com
ACTIVATE YOUR
WARRANTY
To register your product and
activate your warranty today,
go to www.wesloservice.com/
registration.
CUSTOMER CARE
For service at any time, go to
www.wesloservice.com.
Or call 1-866-699-3756
Mon.–Fri. 6 a.m.–6 p.m. MT
Sat. 8 a.m.–12 p.m. MT
Please do not contact the store.
Note: Some replacement parts are
available. For information about
replacement parts, call Customer
Care.

2
WESLO is a registered trademark of ICON Health & Fitness, Inc.
This drawing shows the location(s) of the warning decal(s). If a decal is missing or illegible, call the
telephone number on the front cover of this manual and request a free replacement decal. Apply
the decal in the location shown. Note: The decal(s) may not be shown at actual size.
WARNING DECAL PLACEMENT
256841
WARNING DECAL PLACEMENT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2
IMPORTANT PRECAUTIONS..................................................................3
BEFORE YOU BEGIN. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5
PART IDENTIFICATION CHART. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6
ASSEMBLY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7
HOW TO USE THE TREADMILL ..............................................................11
HOW TO FOLD THE TREADMILL .............................................................12
MAINTENANCE AND TROUBLESHOOTING.....................................................13
EXERCISE GUIDELINES ....................................................................15
LIMITED WARRANTY. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Back Cover
TABLE OF CONTENTS

3
1. It is the responsibility of the owner to ensure
that all users of this treadmill are adequately
informed of all warnings and precautions.
2. Before beginning any exercise program,
consult your physician. This is especially
important for persons over age 35 or persons
with pre-existing health problems.
3. Use the treadmill only as described in this
manual.
4. The treadmill is intended for home use only.
Do not use the treadmill in any commercial,
rental, or institutional setting.
5. Keep the treadmill indoors, away from mois-
ture and dust. Do not put the treadmill in a
garage or covered patio, or near water.
6. Place the treadmill on a level surface, with
at least 8 ft. (2.4 m) of clearance behind it
and 2 ft. (0.6 m) on each side. Do not place
the treadmill on any surface that blocks air
openings. To protect the floor or carpet from
damage, place a mat under the treadmill.
7. Do not operate the treadmill where aerosol
products are used or where oxygen is being
administered.
8. Keep children under age 12 and pets away
from the treadmill at all times.
9. The treadmill should be used only by per-
sons weighing 250 lbs. (113 kg) or less.
10. Never allow more than one person on the
treadmill at a time.
11. Wear appropriate exercise clothes while
using the treadmill. Do not wear loose
clothes that could become caught in the
treadmill. Athletic support clothes are recom-
mended for both men and women. Always
wear athletic shoes. Never use the treadmill
with bare feet, wearing only stockings, or in
sandals.
12. Do not operate the treadmill if the treadmill
is not working properly. (See MAINTENANCE
AND TROUBLESHOOTING on page 13 if the
treadmill is not working properly.)
13. Always stand on the foot rails when starting
or stopping the walking belt. Always hold the
handrails while using the treadmill.
14. When a person is walking on the treadmill,
the noise level of the treadmill will increase.
15. Keep fingers, hair, and clothing away from
the moving walking belt.
16. Do not attempt to raise or lower the tread-
mill until it is properly assembled. (See
ASSEMBLY on page 7 and HOW TO FOLD
THE TREADMILL on page 12.) You must be
able to safely lift 25 lbs. (11 kg) to raise or
lower the treadmill.
17. When folding the treadmill, make sure
that the storage latch is holding the frame
securely in the storage position.
18. Do not change the incline of the treadmill by
placing objects under the treadmill.
19. Inspect and properly tighten all parts each
time the treadmill is used.
20. Never drop or insert any object into any
opening on the treadmill.
WARNING: To reduce the risk of burns, fire, electric shock, or injury to persons, read
all important precautions and instructions in this manual and all warnings on your treadmill before
using your treadmill. ICON assumes no responsibility for personal injury or property damage sus-
tained by or through the use of this product.
IMPORTANT PRECAUTIONS

4
21. Servicing other than the procedures in this
manual should be performed by an autho-
rized service representative only.
22. Over exercising may result in serious injury
or death. If you feel faint, if you become short
of breath, or if you experience pain while
exercising, stop immediately and cool down.
23. Do not place hands or feet under the tread-
mill while it is in use.
24. The roller guards must be 1/8 inch from
the rear roller (see the drawing on page 5).
Adjust the roller guards, if necessary.
SAVE THESE INSTRUCTIONS

5
Handrail
Console
Hood
Walking Belt Pin
Rear Roller
Adjustment Screws
Roller Guards
BEFORE YOU BEGIN
Thank you for selecting the new WESLO®CARDIO
STRIDE 3.0 treadmill. The CARDIO STRIDE 3.0 tread-
mill offers a selection of features designed to make
your workouts at home more effective and enjoyable.
And when you’re not exercising, the unique treadmill
can be folded up, requiring less than half the floor
space of other treadmills.
For your benefit, read this manual carefully before
using the treadmill. If you have questions after
reading this manual, please see the front cover of this
manual. To help us assist you, note the product model
number and serial number before contacting us. The
model number and the location of the serial number
decal are shown on the front cover of this manual.
Before reading further, please familiarize yourself with
the parts that are labeled in the drawing below.
Rear Roller
Length: 4 ft. 5 in. (135 cm)
Width: 2 ft. 3 in. (69 cm)

6
M8 Nylon
Nut (2)–4
M8 x 50mm Bolt
(1)–4
M5 x 10mm
Screw (4)–2
M4 x 12mm
Screw (9)–6
M8 Curved
Washer (3)–4
M10 Washer
(6)–2
M10 x 40mm Screw
(5)–2
M12 Curved
Washer (6)–2
M12 Curved
Washer (6)–2
M12 x 45mm Screw
(5)–2
PART IDENTIFICATION CHART
Use the drawings below to identify small parts used for assembly. The number in parentheses below each draw-
ing is the key number of the part, from the PART LIST near the end of this manual. The number following the key
number is the quantity used for assembly. Note: If a part is not in the hardware kit, check to see whether it is
preattached. Extra parts may be included.

7
• To hire an authorized service technician
to assemble your exercise equipment, call
1-800-445-2480.
• Assembly requires two persons.
• Place all parts in a cleared area and remove the
packing materials. Do not dispose of the packing
materials until you nish all assembly steps.
• After shipping, there may be an oily substance
on the exterior of the treadmill. This is normal. If
there is an oily substance on the treadmill, wipe
it off with a soft cloth and a mild, non-abrasive
cleaner.
• Left parts are marked “L” or “Left” and right parts
are marked “R” or “Right.”
• To identify small parts, see page 6.
• Assembly requires the following tools:
the included hex key
one adjustable wrench
To avoid damaging parts, do not use power tools.
ASSEMBLY
1
1. Identify the Right Handrail (10), and orient it as shown.
Hold the Right Handrail against the Base (12).
Attach the Right Handrail (10) to the Base (12) with two
M8 x 50mm Bolts (1), two M8 Curved Washers (3), and
two M8 Nylon Nuts (2) as shown. Make sure that the
curved sides of the Curved Washers are against the
Base. Do not tighten the Nylon Nuts yet.
Attach the Left Handrail (11) to the Base (12) in the
same way. Make sure that the Left Handrail and the
Handrail Wire (21) are oriented as shown.
1
2
2
3
3
1
10
11
12
3
2
1
2
3
2. Raise the Right Handrail (10) and the Left Handrail (11)
to the position shown. 2
11
10
21

8
3. Attach the Hood (13) to the front of the Frame (14) with
two M5 x 10mm Screws (4). 34
4
13
14
4
5
4. Hold the front of the Frame (14) between the Right
Handrail (10) and the Left Handrail (11).
Align the holes near the front of the Frame (14) with the
upper holes near the lower ends of the Handrails (10,
11). Then, tighten an M12 x 45mm Screw (5) with an
M12 Curved Washer (6) into each Handrail and into the
Frame.
5. Connect the Reed Switch (17) to the Handrail Wire (21).
6
5
5
6
11
14
17
10
21

9
21
11
10
27
22
9
7. Have a second person hold the Center Handrail (27)
near the Right and Left Handrails (10, 11). Connect the
Handrail Wire (21) to the Reed Switch Wire (22). Note:
Pull out only enough wire to make a connection.
Then, insert the wires downward into the Left Handrail.
Attach the Center Handrail (27) to the Handrails (10,
11) with four M4 x 12mm Screws (9). Be careful not to
pinch the Wires (21, 22).
Next, place the treadmill in the storage position (see
page 12). Then, center the Frame (14) between the
Handrails (10, 11), and tighten the four M8 Nylon Nuts (2).
Then, lower the Frame (14) (see page 12).
9
7
6
6. Align the hole in the right side of the Frame (14) with the
hole in the Right Handrail (10). Insert the Pin (15) into
the holes in the Right Handrail and the Frame. Make
sure that the Pin is fully inserted. Then, attach a
Spring Clip (20) to the end of the Pin.
14
15
20
10
2
2
14

10
11. Make sure that all parts are properly tightened before you use the treadmill. To protect the floor or car-
pet, place a mat under the treadmill. To avoid damage to the console, keep the treadmill out of direct sunlight.
25
10. Remove the paper backing from the Adhesive Clip (25).
Press the Adhesive Clip onto the left side of the Frame
(14) in the indicated location. Then, press the Hex Key
(26) into the Adhesive Clip.
Make sure that the walking belt is properly tightened (see
page 14).
Then, lubricate the walking platform (see page 13). 26
14
10
Tab
8. The Console (23) requires two “AAA” batteries. Alkaline
batteries are recommended. Do not use old and new bat-
teries together or alkaline, standard, and rechargeable
batteries together.
Press the indicated tab on the Battery Cover (24), and
remove the Battery Cover. Insert two batteries into the
two battery clips; make sure that the negative (–) ends
of the batteries are touching the springs in the bat-
tery clips.
24
23
8
9. See drawing 9a. Hold the Console (23) near the Center
Handrail (27). Connect the wire on the Console to the
Handrail Wire (21).
Attach the Console (23) to the Center Handrail (27) with
two M4 x 12mm Screws (9). Do not overtighten the
Screws. Make sure that the wires are not pinched.
See drawing 9b. Press the Battery Cover (24) back onto
the Console (23).
23
9
23
24
9b9a
Batteries
21
27