Go!
You’re ready to use your new Westinghouse appliance. A few tips from us:
Remember to pre-heat each time.
For best cooking results pre-heat the oven. Pre-heating allows the oven to reach the required
temperature quickly and eciently as well as cook food at the correct temperature for the entire
cook time. Recommended pre-heat time is 30 mins for baking and 3 minutes for grilling.
Set your temperature
• To set the temperature, turn the temperature selector in a clockwise direction to the desired setting.
• An indicator light in the display will turn on and oven will begin to heat.
• Once the food is cooked, turn the temperature selector back in an anti-clockwise direction.
Note: The desired cooking function must be selected before the oven will turn on.
Set a Timer
• The timer features an automatic oven cut o which allows a cooking period to be set.
• When the timer has counted back to “Auto o”, a bell will sound and the oven will automatically
switch o.
• Once automatic baking is complete, return to the manual operation by setting the timer to “o”.
FAN
FORCED
This setting is best used when cooking on multiple shelves at once or
reheating complete meals for your family.
FAN &
GRILL
When cooking large cuts of meat, this setting gives you result that
is similar to ‘rotisserie’ cooked meat. When using ‘Fan Grill’ it is not
necessary to turn food over during the cooking cycle. Set temperature
to 180°C and cook with the oven door closed.
GRILL
When it comes to cooking tender cuts of meat, steak, chops, sausages,
fish, cheese toasties and other quick cooking foods the grill setting will
get you the best results. By preheating your grill for 3 minutes this will
help in sealing in the natural juices for a better flavour. Grill with the
oven door closed.
DEFROST Ideal for defrosting food before cooking, raising yeast dough, drying
fruits and vegetables.
Refer to your full user manual for more details on oven functions.
Installing the oven accessories
1. Insert side racks
There is a left hand and right hand
version (see image for details).
1. Insert the rear peg into the rear
access hole provided, ensuring that
the peg is fully inserted.
2. Then locate the front peg into the
front access hole and push in firmly.
Telescopic slides can be purchased separately
Set...
2. To fit a shelf or tray to side racks:
1. Locate the rear edge of the
shelf/tray in between 2 guide
rails of the side rack - see
diagram.
2. Align the shelf to the same rail
positions on both sides, with
the front edge raised, begin to
slide the shelf into the oven.
3. When fully inserted the shelf/
tray should not interfere with
the closed oven door.
Choose the right program for the best result:
Condition the oven
(to burn o any residue)
New appliances can have oil or
residue left from manufacturing.
You will need to heat your oven
for 30 minutes before using it for
the first time.
1. Ensure the “Auto O” timer is
set to “O”.
2. Turn the function selector dial
to FAN FORCED
3. Using the temperature selector,
set the oven at 180°C for
approximately 30 minutes.
Please ensure that the room
is well ventilated during this
process.
Detent
Left hand side rack
front peg rear peg
