Weston Products 33-0201-W User manual

HEAVY DUTY ELECTRIC
MEAT GRINDER
MODEL NO. 33-0201-W
REV082911
Listed
20FG
E334071
FOR
HOUSEHOLD
USE ONLY.
ATTENTION!
If any components of this unit are broken, do not operate properly, or for product returns,
please contact Weston Products LLC
Phone: [phone] (Outside the U.S. 440-638-3131)
Mail: 20365 Progress Drive, Strongsville, Ohio 44149
E-Mail: [email protected]
Web Site: WestonProducts.com
All Trademarks and Registered Trademarks are property of the respective companies.
SAVE THESE INSTRUCTIONS!
Refer to them often and use them to instruct others.
CAUTION! It is important to follow the “Food Safety” guidelines outlined in this
manual. For the most up to date instruction visit the USDA website.

-19-
IMPORTANT
SAFEGUARDS
When using electrical appliances, basic safety precautions should always be followed
including the following:
1. READ ALL INSTRUCTIONS BEFORE USING THE APPLIANCE.
2. To protect against risk of electrical shock, do not submerge or use this appliance near water or
other liquid.
3. Unplug this appliance from the electrical outlet when not in use or before putting on or taking off
parts and before cleaning.
4. Close adult supervision is necessary when any appliance is used near children. This appliance
is NOT to be used by children.
5. NEVER use any accessories or parts from other manufacturers. Doing so will VOID YOUR
WARRANTY and may cause re, electrical shock or injury.
6. DO NOT operate any appliance with a damaged cord, plug or after the appliance malfunctions,
or is dropped or damaged in any manner. Return appliance to the nearest authorized service facility
for repair or adjustment.
7. Keep these instructions for use for future reference.
8. Check if the voltage indicated on the appliance corresponds to the local voltage before you
connect the appliance.
9. Thoroughly clean the parts that will come into contact with food before you use the appliance
for the rst time.
10. DO NOT use outdoors.
11. DO NOT let cord hang over edge of table or counter.
12. DO NOT let cord come in contact with a hot surface. DO NOT use on an oven or stove.
13. DO NOT use ngers to scrape food away from the output chute while the appliance is operating.
Never feed food into the appliance by hand. NEVER reach into the appliance. ALWAYS use the
provided Stomper.
14. DO NOT operate the Grinder without the Tray in place.
15. Avoid contacting moving parts. Wait until moving parts have stopped running before you
remove the parts of the appliance.
16. NEVER let the appliance run unattended.
17. Switch the appliance off before detaching or attaching any accessory.
18. DO NOT attempt to grind bones, nuts or other hard items.
19. DO NOT operate the appliance for more than 15 minutes at one time. After 15 minutes of
continuous use, allow a few minutes for the appliance to rest before next use.
20. This appliance has a polarized plug (one blade of the plug is wider than the other). To reduce
the risk of electric shock, this plug will t in a polarized outlet only one way. If the plug does not t fully
in the outlet, reverse the plug. If it still does not t, contact a qualied electrician. DO NOT modify the
plug in any way.
21. CAUTION: In order to avoid a hazardous situation, this appliance must never be connected to
a timer switch.
SAVE THESE INSTRUCTIONS!
Refer to them often and use them to instruct others.
WARNING! Weston Products LLC warrants to the ORIGINAL RETAIL PURCHASER of this product that if operated in
accordance with the printed instruction accompanying it, then for a period of 1 year from the date of purchase,
the product shall be free from defects in material and workmanship.
The Warranty Card, along with a copy of the original receipt, must be received by Weston Products LLC
within 30 days from purchase date for the warranty to apply. Failure to send the completely lled out Warranty
Card, along with a copy of the original receipt, will void the warranty.
The product must be delivered to or shipped freight prepaid to Weston Products LLC for warranty services,
in either its original packaging or similar packaging affording an equal degree of protection. Damage due to
shipping is not the responsibility of the company. Weston Products LLC charges a $35.00 per hour bench
charge. NOTE: No repairs will be started without the authorization of the customer. The return shipping cost
to the customer will be added to the repair invoice.
Weston Products LLC will repair (or at its discretion, replace) the product free of charge, if in the judgment
of the company, it has been proven to be defective as to seller’s labor and material, within the warranty period.
New or rebuilt replacements for factory defective parts will be supplied for one (1) year from the date of
purchase. Replacement parts are warranted for the remainder of the original warranty period.
For non-warranty repairs, contact Weston Products LLC’s Customer Service at 1-800-814-4895 M-F
8am-5pm EST (outside of the United States 440-638-3131) to obtain a Return Merchandise Authorization
Number (RMA Number). Weston Products LLC will refuse all returns that do not contain this number. DO
NOT RETURN THE UNIT WITHOUT PROPER AUTHORIZATION FROM WESTON PRODUCTS LLC.
LIMITATIONS: The warranty is void if the product is used for any purpose other than that for which it is
designed. The product must not have been previously altered, repaired, or serviced by anyone else other
than Weston Products LLC. If applicable, the serial number must not have been altered or removed. The
product must not have been subjected to accident in transit or while in the customer’s possession, misused,
abused, or operated contrary to the instructions contained in the instruction manual. This includes failure
caused by neglect of reasonable and necessary maintenance, improper line voltage and acts of nature. This
warranty is not transferable and applies only to U.S. and Canadian sales.
Except to the extent prohibited by applicable law, no other warranties whether expressed or implied,
including warranty merchantability and tness for a particular purpose, shall apply to this product. Under no
circumstances shall Weston Products LLC be liable for consequential damages sustained in connection with
said product and Weston Products LLC neither assumes nor authorizes any representative or other person to
assume for it any obligation or liability other than such as is expressly set forth herein. Any applicable implied
warranties are also limited to the one (1) year period of the limited warranty.
This warranty covers only the product and its specic parts, not the food or other products processed in it.
CUT ALONG THE DOTTED LINE AND SEND THE WARRANTY CARD ALONG WITH A COPY OF YOUR ORIGINAL
PURCHASE RECEIPT TO:
Weston Products LLC - WARRANTY DEPARTMENT
20365 Progress Drive, Strongsville, OH 44149
Customer Name: _________________________________
Address: _______________________________________
City/State/Zip: ___________________________________
Telephone Number: (_________) ____________________
E-Mail Address: _________________________________
Original Date of Purchase: ______/________/________
Product Model #: _________________________________
Serial # (if applicable): ______________________
WESTON WARRANTY INFORMATION
SAVE THIS WARRANTY INFORMATION FOR YOUR RECORDS!
WESTON WARRANTY CARD
SEND THIS CARD ALONG WITH A COPY OF YOUR ORIGINAL PURCHASE RECEIPT TO:
WESTON PRODUCTS LLC-WARRANTY DEPT. , 20365 PROGRESS DRIVE, STRONGSVILLE, OH 44149

-3-
ADDITIONAL ACCESSORIES AVAILABLE
Shredder / Slicer Attachment Kit 33-0822
Cookie Attachment Kit 33-0823
Pasta Making Attachment Kit 33-0819
Tomato and Fruit Juicer Attachment Kit 33-0821
19 mm Collagen Casing 19-0101-W
Mahogany Fibrous Casing 1.5” x 12” 19-0201-W
Hog Ring Pliers 47-1401
Italian Sausage Seasoning Kit 02-0905-W
Ground Meat Packaging Kit 07-1101
Vacuum Sealer PRO-2300 65-0101
Vacuum Sealer Bags 8” x 12” 100/pk 30-0101-W
-18-
WARNING!
1. DO NOT use the Grinder without the Tray
secured into place.
2. ALWAYS DISCONNECT Grinder from
power source before servicing, changing
accessories or cleaning the unit.
3. Plug the Grinder into a standard 120 Volt,
60 Hz wall outlet.
4. DO NOT USE the Grinder if the Power
Cord, Plug or any other parts are damaged. If
the Power Cord or the Grinder is damaged,
call Customer Service. DO NOT ATTEMPT TO
REPLACE THE CORD. Be sure to not allow
the Power Cord to drape into your work area.
Check that all parts are operating properly,
and perform the intended functions. Check
for alignment of moving parts or any other
conditions that may affect the operation.
5. NEVER use any accessories or parts from
other manufacturers. Doing so will VOID YOUR
WARRANTY and may cause re, electrical
shock or injury.
6. TO PROTECT AGAINST RISK OF
ELECTRICAL SHOCK: DO NOT SUBMERGE
THE MAIN GRINDER BODY INTO WATER
OR LIQUID. BE SURE THE GRINDER IS
DISCONNECTED FROM THE POWER
SOURCE BEFORE CLEANING. Wash all
parts by hand and thoroughly dry. Thoroughly
clean all parts that will come in contact with
food before using the appliance. NEVER rinse
appliance Grinder Motor under tap, only use a
moist cloth to clean the Grinder Motor Unit.
7. Reduce risk of unintentional starting. Make
sure the Power Switch is in the “OFF” position
before attaching to the power source.
8. KEEP FINGERS CLEAR of the Auger
and Cutting Blades AT ALL TIMES. NEVER
REACH INTO THE GRINDER, doing so may
cause serious injury. ALWAYS USE THE
PROVIDED STOMPER, NEVER FEED FOOD
BY HAND.
9. NEVER use ngers to scrape food away
from the Grinding Plate while the Grinder is in
operation. SEVERE INJURY MAY RESULT.
10. NEVER LEAVE THE GRINDER
UNATTENDED. Be safe, DISCONNECT the
Grinder from power source before leaving the
work area. Close supervision is necessary
when any appliance is used near children. This
appliance is NOT to be used by children.
11. Wait until all moving parts have stopped
before you remove any part of the Grinder, or
before switching the Grinder in reverse.
12. TIE BACK loose hair and clothing, and roll
up long sleeves before operating the Grinder.
REMOVE ties, rings, watches, bracelets, or
other jewelry before operating the Grinder.
13. Be sure the Grinder is on a stable work
surface. Be sure all the Grinder Feet are
stable.
14. DO NOT attempt to grind bones, nuts or
other hard items.
15. DO NOT run Grinder without meat in the
Head. Severe damage to the Head and Auger
may occur.
16. WEAR EYE PROTECTION. Wear safety
glasses. Everyday eye glasses are not safety
glasses. Safety glasses conform to ANSI Z87.1
requirements. Note: approved safety glasses
have Z87 printed or stamped on them.
17. DO NOT use outdoors.
18. DO NOT use the Grinder while under the
inuence of drugs, medications or alcohol.
19. DO NOT let the Power Cord hang over
edge of work surface.
20. DO NOT attempt to operate the Grinder
if the Grinder itself is cold. The Grinder
temperature should be at least 45oF (7oC)
before beginning.
21. The Gear Housing and the Motor Cover
may become HOT during operation. This is
normal. DO NOT touch these parts during
operation or until they cool after use.
IMPORTANT SAFETY RULES
SAVE THESE INSTRUCTIONS!
Refer to them often and use them to instruct others.
READ AND FULLY UNDERSTAND ALL INSTRUCTIONS
AND WARNINGS PRIOR TO USING THIS UNIT. YOUR
SAFETY IS MOST IMPORTANT! FAILURE TO COMPLY
WITH PROCEDURES AND SAFEGUARDS MAY RESULT
IN SERIOUS INJURY OR PROPERTY DAMAGE.
REMEMBER: YOUR PERSONAL SAFETY IS YOUR
RESPONSIBILITY!
These products and many more products can be ordered by visiting
WestonProducts.com or by calling
Weston Products LLC Toll Free at 1-800-814-4895
Monday thru Friday 8:00am-5:00pm EST. Outside the U.S. call 440-638-3131
E-Mail: [email protected]

1
2
4
Main
Body Power
Switch
3
8
11
12
10
97
5
6
13
REVON/OFF
-4- -17-
BAVARIAN PATTIES WITH SAUERKRAUT
1 ½ lb. (0.7 kg) beef 1 egg ½ cup applesauce
1 tsp. salt 1/3 cup dry bread crumbs ½ tsp. allspice
¼ cup chopped onion 16 oz. (0.5 kg) sauerkraut
. Grind the beef through the grinder plate of your choice using the grinding
instructions
.Combine the ground beef, egg, applesauce, salt, bread crumbs, allspice and onion
.Shape the mixture into patties about 3/4” (1.9 cm) thick
.Brown in a large skillet over medium heat, turning once, then drain
.Spoon sauerkraut over the patties
.Cover and simmer for 15 minutes
BAYOU BURGERS
1 lb. (0.5 kg) beef ½ tsp. garlic powder ½ tsp. dried thyme
¼ cup sliced green onion ¾ tsp. crushed dried basil 1 tsp. season salt
½ tsp. hot pepper sauce
. Grind the beef through the grinder plate of your choice using the grinding
instructions
.Preheat grill
.Combine all the ingredients
.Shape the mixture into 4 patties about 3/4” (1.9 cm) thick
. Grill 4” (10.2 cm) from heat, turning once 10-15 minutes, or until done
SPICY TURKEY BURGERS
2 lb. (0.9 kg) turkey 2 tbsp. minced garlic 3 tbsp. paprika
1 tsp. minced ginger root 2 fresh green chile pepper, diced
1 medium red onion, diced ½ cup nely chopped cilantro
1 tsp. salt ¼ cup low sodium soy sauce
1 tbsp. ground dry mustard 1 tbsp. freshly ground black pepper
1 tbsp. ground cumin 1 dash Worcestershire sauce
. Grind the turkey through the grinder plate of your choice using the grinding
instructions
.Preheat grill
.Combine all the ingredients
.Shape the mixture into 4 patties about 3/4” (1.9 cm) thick
. Grill 4” (10.2 cm) from heat, turning once 10-15 minutes, or until done
EASY MEATLOAF
1 lb. (0.5 kg) beef 1 lb. (0.5 kg) ground pork sausage
8 oz. package French onion dip 2 eggs
10 oz. package saltine crackers, crushed
. Grind the beef through the grinder plate of your choice using the grinding
instructions
.Preheat oven to 375oF (190oC)
.Combine all the ingredients
.Mix well and shape into a loaf
.Bake in a 5” x 9”(13 x 23 cm) loaf pan for 1 hour
CAUTION! It is important to follow the “Food Safety” guidelines outlined in this
manual. For the most up to date instruction visit the USDA website.
Reverse
Button
Power
Indicator
Light

This appliance is equipped with a polarized plug
(one blade is wider than the other) to reduce the
risk of electric shock. The plug must fully t into an
electrical outlet. If the plug does not t, reverse it
and try again. If it still does not t, contact a qualied
electrician to inspect and/or update the electrical
outlets in your home. Do not modify the plug in any
way to t an incompatible outlet.
OUTLET INSTRUCTIONS
COMPONENT LIST
DIAGRAM PART PART
NUMBER DESCRIPTION NUMBER
1 Stomper 33-0877
2 Aluminum Tray 33-0824-A
3 Grinder Head 33-0809
4 Head Release Button 33-0808
5 3mm Stainless Steel Fine Grinding Plate 33-0803
6 4.5mm Stainless Steel Medium Grinding Plate 33-0804
7 Auger 33-0802-N
8 Stainless Steel Grinder Knife 33-0845
9 8mm Stainless Steel Coarse Grinding Plate 33-0810
10 Front Ring Nut 33-0842
11 Stufng Spacer 33-0876
12 Stufng Funnel 33-0820
Not Shown Gear Set 33-0817
Not Shown Power Cord 33-0818
13 Auger Driver (2) 33-0894-N
-5--16-
VENISON SAUSAGE
6 lb. (2.7 kg) venison 6 lb. (2.7 kg) lean pork ½tsp. sage
½tsp. cayenne pepper 2 tsp. salt ½cup honey
2 tsp. pepper Sausage Casings (optional)
. Grind the venison and pork through the coarse grinder plate using the grinding
instructions
. Add all the ingredients to the meat and mix well
. Regrind the mixed meat through the ne grinding plate using the grinding instructions
. Stuff the sausage into casings or shape into patties
VENISON BREAKFAST SAUSAGE PATTIES
6 lb. (2.7 kg) venison ½lb (0.3 kg) bacon 1 tsp. pepper
½tsp. sage 1 tsp. salt
. Grind the venison and bacon through the ne grinder plate using the grinding
instructions
. Add all the ingredients to the meat and mix well
. Refrigerate the mixture for a few hours before use
. Shape the mixture into thin patties
. Pour a little oil into a skillet or onto a griddle and heat to medium high
. Grill the patties for a few minutes on each side
CHORIZO (MEXICAN) SAUSAGE
2 lb. (0.9 kg) lean pork trimming 2 medium onions, minced ½cup cider vinegar
1 tbsp. ground oregano 8 oz. (0.2 kg) beef/pork fat Sausage casings
¼cup ground red chili (mild or hot) 1 tsp. ground cinnamon
8 cloves garlic, pressed
. Grind the meat and fat through coarse grinder plate using the grinding instructions
. Add the onions, garlic, vinegar and seasonings (use chili to taste)
. Mix the ground meat and the seasonings, then place in a covered bowl and
refrigerate for at least one hour
. Stuff the sausage into casings to make 4” (10.2 cm) links
FRESH ITALIAN SAUSAGE - MILD/HOT
5 tsp. salt 1 tsp. sugar 2 tsp. caraway seeds
3 tsp. crushed hot peppers 1 tsp cracked fennel seed (omit if making mild sausage)
2 tsp. coarse ground black pepper 1 tsp. coriander 1 pint cold water
10 lb. (4.5 kg) boneless pork butts Sausage casings
. Grind the pork butts through the grinder plate of your choice using the grinding
instructions
. Add all the ingredients to the meat and mix well
. Stuff the sausage into casings to make 4” (10.2 cm) links
RECIPES
If any components of this unit are broken or the unit does not operate
properly, call Weston Products LLC Toll Free at
1-800-814-4895
Monday thru Friday 8:00am-5:00pm EST. Outside the U.S. call 440-638-3131
E-Mail: [email protected]

CLEANING
1. Unscrew the Ring Nut and remove all parts
from the Grinder Head.
2. To remove the Grinder Head, press the Head
Release Button and turn the Grinder Head
clockwise. Figure A
3. Wash all parts that come in contact with
food in hot soapy water. Rinse with clear water.
Dry immediately. The Grinder parts are not
dishwasher safe. Do NOT use bleach.
4. Fully lubricate the Grinder Head, Grinding
Plates and the Knife with food grade silicone
spray before and after each use.
5. Clean the Main Body with a soft damp towel.
Dry immediately. DO NOT immerse the Main
Body of the Grinder in water or other liquids.
-6- -15-
WARNING! Before cleaning, assembling or disassembling the Grinder,
make sure the PLUG IS REMOVED FROM THE OUTLET/POWER SOURCE!
ALWAYS unplug the Grinder when not in use.
TYPES OF SAUSAGE
Most sausages fall into one of four categories: Fresh, Smoked, Cooked or Dried. All
sausages, except dried, require refrigerated storage. There is also a sub-category
of uncooked smoked sausages.
Among the fresh and uncooked smoked sausages, you will nd such avors as
kielbasa or Polish sausage, Italian sausage, breakfast sausage and many others.
Both fresh and uncooked smoked sausages require cooking before eating and also
require refrigerated storage.
Smoked and cooked sausages include salami, bologna, the ever-popular hot dogs
and many others. Proper smoking requires a smokehouse or smoker. These can be
simple home-built structures made from metal drums or even old refrigerators or they
can be elaborate manufactured units. Most smoked sausages are warmed before
serving. Many people think that a smoked sausage will last much longer without
spoilage, but this is not true. Smoked sausages should be treated the same as fresh
sausage in terms of storage.
Dried sausages require the longest processing time, as they are air dried over a long
period of time. Some types of dry sausages are pepperoni, prosciutto and a variety
of ham products, just to name a few. The conditions under which the meat is dried
are very exacting; temperature, time and humidity must all be carefully monitored for
a safe and delicious product.
STORAGE
It is important to remember that sausage will lose its avor the longer that it is stored.
It is recommended that you only make as much sausage as you will need for 4-
6 weeks. Even frozen sausage will begin to lose avor noticeably after 6 weeks.
Frozen sausage should be thawed slowly in the refrigerator before cooking or serving.
Quick thawing of the product will degrade the taste as well.
NEVER operate Grinder without the Tray secured in place.
To avoid serious or fatal injury, NEVER reach into any Grinder inlet.
ALWAYS use the Stomper to push food into the Grinder Head.
Read & fully understand all instructions & warnings prior to use.
WARNING!
REV ON/OFF
Figure A
Head Release
Button
NEVER operate Grinder without the Tray secured in place.
To avoid serious or fatal injury, NEVER reach into any Grinder inlet.
ALWAYS use the Stomper to push food into the Grinder Head.
Read & fully understand all instructions & warnings prior to use.
WARNING!

-7-
-14-
GRINDER ASSEMBLY
1. Remove the Ring Nut, Grinding Plate, Knife
and Auger from the Grinder Head before installing
the Grinder Head to the Main Body.
2. Align the notches on the Grinder Head with the
tabs on the Main Body.
3. Press the Grinder Head against the Motor and
rotate it counterclockwise until it locks into place.
Figure B
4. Insert the Auger into the
Grinder Head, Auger Driver end
rst. Figure C
5. Place the Grinder Knife onto
the square portion of the Auger Pin.
The cutting edges (at side) of the
Knife should be facing out. Figure D
6. Place the Grinding Plate of
your choice onto the Auger Pin.
Make sure the notch of the Grinder
Plate ts into the positioning pin of
the Grinder Head. Figure C
7. Turn the Ring Nut clockwise
onto the threaded end of the Grinder
Head until it touches the Grinder
Plate and is snug. DO NOT over-
tighten the Ring Nut.
8. Place the Tray on the upright
part of the Grinder Head. NEVER
use the Grinder without the Tray
installed!
Figure B
Figure C
REV ON/OFF
R
E
V
O
N
/
O
FF
Figure D
WARNING! Before cleaning, assembling or disassembling the Grinder,
make sure the PLUG IS REMOVED FROM THE OUTLET/POWER SOURCE!
ALWAYS unplug the Grinder when not in use.
NEVER operate Grinder without the Tray secured in place.
To avoid serious or fatal injury, NEVER reach into any Grinder inlet.
ALWAYS use the Stomper to push food into the Grinder Head.
Read & fully understand all instructions & warnings prior to use.
WARNING!
SAUSAGE INFORMATION
MEAT SELECTION FOR SAUSAGE MAKING
Sausage making has evolved over many years and generations, and as a result
there are countless types of sausage you can make using the basic ingredients of
meat, fat and a few carefully blended spices. Following are a few simple guidelines
that will help you make the best tasting sausage possible.
Any type of meat can be used for making sausage: pork, beef, bison, moose and
caribou, even antelope make great sausage. It is important when preparing venison
or other red game meats to trim all the fat from the meat, as red game tallow will turn
rancid in as few as ve days. Replace the fat with either pork or beef fat, depending
on the type of product you are making, at a ratio of 1 pound (0.5 kg) of fat for every
4 pounds (1.8 kg) of game meat.
The fat content of your sausage will affect the taste, texture, cooking characteristics
and shelf life of your product. Most commercially made sausage has a fat content
of about 20%. Using less than 12% fat will result in a very dry tasting sausage, while
using more than 20% may result in a sticky avorless sausage that will be difcult
to cook.
CURING
It is important to properly cure meats to preserve meat and poultry, and to destroy
undesirable microorganisms on the meat surfaces that cause spoilage and food
born illnesses. There are many steps that help in this process, including smoking,
cooking, drying, chilling and the addition of cure ingredients. The oldest means of
accomplishing this is by introducing salt into the meat. The resistance of bacteria
to salt varies widely among different types of bacteria. The growth of some bacteria
is inhibited by salt concentrations as low as 3%, e.g., Salmonella, whereas other
types are able to survive in much higher salt concentrations, e.g., Staphylococcus.
Fortunately, the growth of many undesirable organisms normally found in cured meat
and poultry products is inhibited at low concentrations of salt.
Modern curing is based on Nitrates and is very scientic. The best way to ensure
proper curing is to purchase one of the many commercially available curing agents
from either a grocery store or your local butcher. A very common cure is Prague
Powder, which is available in two types (#1 and #2).
CASING
There are many different types of casings available, the right choice depends on
personal preference as well as the type of sausage you wish to make. For most
sausages, your choices are natural or collagen. Don’t let the names fool you;
collagen casings are not a synthetic product . They are made from beef skin and
other tissues. Collagen casings are uniform in size and texture and require almost
no preparation. “Natural” casings are the intestines of lamb, sheep, hogs or beef.
They are less uniform in size and require substantial preparation. For those reasons,
more than 75% of commercially made sausage in the U.S. is made with collagen
casing. There are also brous non-edible casings that are used for some varieties of
smoked sausages and bolognas.
NOTE: Special considerations must be made when using venison or other wild game,
since it can become heavily contaminated during eld dressing. Venison is often held
at temperatures that could potentially allow bacteria to grow, such as when it is being
transported. Refer to the USDA Meat and Poultry Department for further questions or
information on meat and food safety.
Auger
Pin
Cutting edges of the Knife facing out.

1. Follow the “Grinder Assembly Instructions” to fully assemble the Grinder including the
Tray.
NOTE: It is best to grind the meat using the coarse, 8 mm Grinding Plate rst. If a ner
grind of meat is desired, run the coarse ground meat through the Grinder a second time
using the ne, 4.5 mm or 3 mm Grinding Plate.
2. Trim the meat of all cords, tendons, bones,
shot, etc.
3. For best results, be sure that all meat has
been chilled to between 32-34oF (0-1oC) before
grinding. DO NOT ALLOW MEAT TO SIT OUT
AT ROOM TEMPERATURE LONGER THAN
ABSOLUTELY NEEDED. Closely follow the
“Food Safety” instructions as outlined by the
USDA.
4. Cut meat into sizes small enough to t into the
Feed Chute. Approximately 1” (2.5 cm) cubes.
5. Place cubed meat to be ground into the Tray.
Do not overll the Tray, place just enough meat to
leave the Feed Chute area open.
6. Place a dish or bowl to collect the ground
meat at the end of the Grinder Head . Figure E
7. Make sure the Grinder is in the “OFF” position.
Attach the Grinder to the power supply.
8. Press “ON” the Grinder Button. Carefully
start feeding cubes of meat into the Feed
Chute. ONLY USE THE STOMPER TO PUSH
MEAT INTO THE HEAD, DO NOT USE YOUR
FINGERS OR ANY OTHER OBJECT.
GRINDING INSTRUCTIONS
-8- -13-
WARNING! Before cleaning, assembling or disassembling the Grinder,
make sure the PLUG IS REMOVED FROM THE OUTLET/POWER SOURCE!
ALWAYS unplug the Grinder when not in use.
REV
ON/OFF
Figure E
NOTE:
To prevent
overheating, do not
operate the Grinder for
more than 15 minutes
at a time.
Allow the Grinder
to cool
periodically.
There are basic rules to follow when handling food.
They are COOK, SEPARATE, CLEAN, and CHILL.
COOK
It’s crucial to cook food to a safe internal temperature to destroy bacteria that is
present. The safety of hamburgers and other foods made with ground meat has
been receiving a lot of attention lately, and with good reason. When meat is ground,
the bacteria present on the surface is mixed throughout the ground mixture. If this
ground meat is not cooked to at least 160oF to 165oF (71oC to 74oC), bacteria will not
be destroyed and there’s a good chance you will get sick.
Solid pieces of meat like steaks and chops don’t have dangerous bacteria like E.
coli on the inside, so they can be served more rare. Still, any beef cut should be
cooked to an internal temperature of at least 145oF (63oC) (medium rare). The safe
temperature for poultry is 180oF (82oC) and solid cuts of pork should be cooked to
160oF (71oC). Eggs should be thoroughly cooked too. If you are making a meringue
or other recipe that uses uncooked eggs, buy specially pasteurized eggs or use
prepared meringue powder.
SEPARATE
Foods that will be eaten uncooked and foods that will be cooked before eating MUST
ALWAYS be separated. Cross-contamination occurs when raw meats or eggs come
in contact with foods that will be eaten uncooked. This is a major source of food
poisoning. Always double-wrap raw meats and place them on the lowest shelf in the
refrigerator so there is no way juices can drip onto fresh produce. Then use the raw
meats within 1-2 days of purchase, or freeze for longer storage. Defrost frozen meats
in the refrigerator, not on the counter.
When grilling or cooking raw meats or sh, make sure to place the cooked meat on
a clean platter. Don’t use the same platter you used to carry the food out to the grill.
Wash the utensils used in grilling after the food is turned for the last time on the grill,
as well as spatulas and spoons used for stir-frying or turning meat as it cooks.
Make sure to wash your hands after handling raw meats or raw eggs. Washing hands
with soap and water, or using a pre-moistened antibacterial towelette is absolutely
necessary after you have touched raw meat or raw eggs. Not washing hands and
surfaces while cooking is a major cause of cross-contamination.
CLEAN
Wash your hands and work surfaces frequently when you are cooking. Washing with
soap and warm water for at least 15 seconds, then dry with a paper towel.
CHILL
Chilling food is very important. The danger zone where bacteria multiply is between
40oF and 140oF (4oC and 6oC). Your refrigerator should be set to 40oF (4oC) or below;
your freezer should be 0oF (-17oC) or below. Simple rule: serve hot foods hot, cold foods
cold. Use chang dishes or hot plates to keep food hot while serving. Use ice water
baths to keep cold foods cold. Never let any food sit at room temperature for more than
2 hours - 1 hour if the ambient temperature is 90oF (32oC) or above. When packing
for a picnic, make sure the foods are already chilled when they go into the insulated
hamper. The hamper won’t chill food - it just keeps food cold when properly packed
with ice. Hot cooked foods should be placed in shallow containers and immediately
refrigerated so they cool rapidly. Make sure to cover foods after they are cool.
FOOD SAFETY
NEVER operate Grinder without the Tray secured in place.
To avoid serious or fatal injury, NEVER reach into any Grinder inlet.
ALWAYS use the Stomper to push food into the Grinder Head.
Read & fully understand all instructions & warnings prior to use.
WARNING!

-9--12-
STUFFER ASSEMBLY
1. Remove the Ring Nut, Grinding Plate, Knife
and Auger from the Grinder Head before installing
the Grinder Head to the Main Body.
2. Align the notches in the Grinder Head with the
tabs on the Main Body.
3. Press the Grinder Head against the Motor and
rotate it counterclockwise until it locks into place.
Figure F
4. Insert the Auger into
the Grinder Head, Auger
Driver end rst. Figure G
5. Place the Stufng
Spacer into the Grinder
Head. Make sure the notch
of the Stufng Spacer ts
into the positioning pin of the
Grinder Head.
6. Insert the Stufng
Funnel through the Ring
Nut and then onto the
Grinder Head.
7. Turn the Ring Nut
clockwise onto the threaded
end of the Grinder Head
until it touches the Stufng
Funnel. DO NOT over-
tighten the Ring Nut.
8. Place the Tray on the
upright part of the Grinder
Head.NEVER use the
Grinder without the Tray
installed!
Figure F
Figure G
REV ON/OFF
REV
ON/OFF
WARNING! Before cleaning, assembling or disassembling the Grinder,
make sure the PLUG IS REMOVED FROM THE OUTLET/POWER SOURCE!
ALWAYS unplug the Grinder when not in use.
THERMAL OVERLOAD PROTECTION
The Heavy Duty Electric Meat Grinder will automatically shut down if it overheats. If
this occurs:
1. Turn the Grinder “OFF” and unplug the Power Cord.
2. Remove the Grinder Head from the Main Body.
3. Wait until the Grinder cools or about 1 hour. Keep meat refrigerated while the
Grinder cools. Disassemble and remove meat from the Head if necessary.
4. Reassemble the Grinder and resume normal operation.
5. To prevent overheating, do not operate the Grinder for more than 15 minutes at
a time. Allow the Grinder to cool periodically.
.When storing the Grinder, fold and place
the Power Cord in the compartment on bottom.
Insert the plug end of the Power Cord last.
.The provided Stomper also serves
as a neat and compact way to store the
Stufng Funnel and the Stufng Spacer.
.Any time that you change the Grinding Plates, the Head should be removed
COMPLETELY to prevent pushing meat back into the Motor Drive Shaft Housing.
.To prevent overheating, do not operate the Grinder for more than 15 minutes at
a time. Allow the Grinder to cool periodically.
. DO NOT over-tighten the Front Ring Nut. It should be rmly tight.
. Make sure the Grinding Knife blades lay at on the Grinder Plate.
. DO NOT operate the Grinder without meat in the Head. Running the Grinder
while dry could damage the Head and Auger.
. Always lubricate the Head, Grinding Plate and Grinding Knife with a food-grade
silicone spray after cleaning.
. DO NOT grind bones, nuts or other hard objects.
HELPFUL HINTS
WARNING! Before cleaning, assembling or disassembling the Grinder,
make sure the PLUG IS REMOVED FROM THE OUTLET/POWER SOURCE!
ALWAYS unplug the Grinder when not in use.
NEVER operate Grinder without the Tray secured in place.
To avoid serious or fatal injury, NEVER reach into any Grinder inlet.
ALWAYS use the Stomper to push food into the Grinder Head.
Read & fully understand all instructions & warnings prior to use.
WARNING!
Auger
Driver

STUFFING INSTRUCTIONS
-10- -11-
WARNING! Before cleaning, assembling or disassembling the Grinder,
make sure the PLUG IS REMOVED FROM THE OUTLET/POWER SOURCE!
ALWAYS unplug the Grinder when not in use.
1. After grinding the meat following the “Grinding Instructions”, mix the ground meat with
the sausage seasonings.
2. Follow the “Stuffer Assembly Instructions” to fully assemble the Grinder as a Stuffer
including the Tray.
NOTE: While one person can stuff sausage with
this Grinder, it is recommended that two people
perform this operation.
3. Place seasoned ground meat into the Tray.
Do not overll the Tray, place just enough meat to
leave the Feed Chute area open.
4. Slide a sausage casing over the Stufng
Funnel. See the “Sausage Information / Casing”
section of this manual for more information.
5. Slide 4”-6” (10-15 cm) of casing from the end
of the Stufng Funnel and tie a knot in the end
of the casing. If you are using large diameter
brous casing, hold the closed end of the casing
tightly against the end of the Stufng Funnel.
Figure H
6. Make sure the Grinder is in the
“OFF” position. Attach the Grinder to
the power supply.
7. Press “ON” the Grinder Button.
Carefully start feeding ground meat
into the Feed Chute. ONLY USE
THE STOMPER TO PUSH MEAT
INTO THE HEAD, DO NOT USE
YOUR FINGERS OR ANY OTHER
OBJECT.
...INSTRUCTIONS CONTINUED ON NEXT PAGE
REV
ON/OFF
NOTE:
To prevent
overheating, do not
operate the Grinder for
more than 15 minutes
at a time.
Allow the Grinder
to cool
periodically.
Figure H
8. Hold the casing in place with one hand while feeding the sausage mixture through
the Grinder. As the meat lls the casing, gently lay it on a clean, dry surface.
NOTE: When using natural casings, use a wet surface.
9. Do not ll the last 3”-4” (8-10 cm) of casing. After the entire length of casing has
been stuffed, twist the open end to close, then tie off the ends of the casing tightly to
close. Twist into links.
10. Whenever stufng sausage, ll the casing slowly to avoid air pockets. If air pockets
do appear in the sausage use a pin to prick the bubbles. The small holes will seal
naturally.
The reverse function only should be used
for brief periods of time to help clear a
jam.
1. Allow the Grinder Motor to come to
a COMPLETE STOP before engaging in
reverse “REV”.
2. Push the Rev Button. Figure I
NOTE: NEVER operate the Grinder in reverse for more than 5 seconds.
3. If the Grinder remains jammed after using the reverse function, turn the Grinder
“OFF”, disconnect the Grinder from the power source. Disassemble the Grinder
Head and clean it according to the “Cleaning Instructions.” Re-assemble the Grinder
and follow the “Grinding Instructions/ Stufng Instructions.”
USING THE REVERSE FUNCTION
Reverse
Button
Figure I
NEVER operate Grinder without the Tray secured in place.
To avoid serious or fatal injury, NEVER reach into any Grinder inlet.
ALWAYS use the Stomper to push food into the Grinder Head.
Read & fully understand all instructions & warnings prior to use.
WARNING!
NEVER operate Grinder without the Tray secured in place.
To avoid serious or fatal injury, NEVER reach into any Grinder inlet.
ALWAYS use the Stomper to push food into the Grinder Head.
Read & fully understand all instructions & warnings prior to use.
WARNING!