Weston Roma 05-0301 User manual

REV121509
Apple & Fruit Crusher
Sold Separately
APPLE & FRUIT CRUSHER
HOPPER
Model No. 05-0301
ATTENTION
If any components of this unit are broken,
do not operate properly, or for product returns,
please contact Pragotrade LLC at
1-800-814-4895
Outside the U.S. call 440-638-3131.
For the online catalog, log onto www.westonsupply.com.
Exclusively imported by Pragotrade LLC Strongsville, Ohio
www.pragotrade.com
LLC
u.s.a.

-2-
COMPONENT LIST
A
B
C
D
E F G H
Left Right
Mounting
Bracket
Back Board Front Board
Left Side Board
Right Side Board
DIAGRAM PART  
LETTER DESCRIPTION 
 A BackBoard
 B LeftSideBoard
 C RightSideBoard
 D FrontBoard
 E LeftMountingBracket,RightMountingBracket
 F 1”MachineScrew(2),FlatWasher(2),HexLockingNut (2)
 G 1½” MachineScrews(2),FlatWasher(4),HexLockingNut(2)
 H WoodScrew(12),FlatWasher(12)
TOOLS
NEEDED TO
ASSEMBLE
Phillips Head Screwdriver
10mm Wrench
8mm Wrench
-7-
If any components of this unit are broken or the unit does not operate
properly, call Pragotrade LLC Toll Free at
1-800-814-4895
Monday thru Friday 8:00am-5:00pm EST.
Outside the U.S. call 440-638-3131
WARRANTY INFORMATION
SAVE THIS WARRANTY INFORMATION FOR YOUR RECORDS!
Pragotrade LLC warrants to the ORIGINAL RETAIL PURCHASER of this product that if operated in accordance
with the printed instruction accompanying it, then for a period of 1 year from the date of purchase, the product shall be
free from defects in material and workmanship.
The Warranty Card, along with a copy of the original receipt, must be received by Pragotrade LLC within 30 days
from purchase date for the warranty to apply. Failure to send the completely lled out Warranty Card, along with a copy
of the original receipt, will void the warranty.
The product must be delivered to or shipped freight prepaid to Pragotrade LLC for warranty services, in either its
original packaging or similar packaging affording an equal degree of protection. Damage due to shipping is not the
responsibility of the company. Pragotrade LLC charges a $35.00 per hour bench charge. NOTE: No repairs will be
started without the authorization of the customer. The return shipping cost to the customer will be added to the repair
invoice.
Pragotrade LLC will repair (or at its discretion, replace) the product free of charge, if in the judgment of the company,
it has been proven to be defective as to seller’s labor and material, within the warranty period.
New or rebuilt replacements for factory defective parts will be supplied for one (1) year from the date of purchase.
Replacement parts are warranted for the remainder of the original warranty period.
For non-warranty repairs, contact Pragotrade’s Customer Service at 1-800-814-4895 M-F 8am-5pm EST (outside of
the United States 440-638-3131) to obtain a Return Authorization Number (RMA Number). Pragotrade will refuse all
returns that do not contain this number. DO NOT RETURN THE UNIT WITHOUT PROPER AUTHORIZATION
FROM PRAGOTRADE LLC.
LIMITATIONS: The warranty is void if the product is used for any purpose other than that for which it is designed.
The product must not have been previously altered, repaired, or serviced by anyone else other than Pragotrade LLC.
If applicable, the serial number must not have been altered or removed. The product must not have been subjected
to accident in transit or while in the customer’s possession, misused, abused, or operated contrary to the instructions
contained in the instruction manual. This includes failure caused by neglect of reasonable and necessary maintenance,
improper line voltage and acts of nature. This warranty is not transferable and applies only to U.S. and Canadian sales.
Except to the extent prohibited by applicable law, no other warranties whether expressed or implied, including
warranty merchantability and tness for a particular purpose, shall apply to this product. Under no circumstances shall
Pragotrade LLC be liable for consequential damages sustained in connection with said product and Pragotrade LLC
neither assumes nor authorizes any representative or other person to assume for it any obligation or liability other than
such as is expressly set forth herein. Any applicable implied warranties are also limited to the one (1) year period of
the limited warranty.
This warranty covers only the product and its specic parts, not the food or other products processed in it.
CUT ALONG THE DOTTED LINE AND SEND THE WARRANTY CARD ALONG WITH A
COPY OF YOUR ORIGINAL PURCHASE RECEIPT TO:
Pragotrade LLC
20365 Progress Drive, Strongsville, OH 44149
WARRANTY CARD
SEND THIS CARD ALONG WITH A COPY OF YOUR ORIGINAL PURCHASE RECEIPT
Customer Name: ________________________________
Address: ______________________________________
City/State/Zip: ___________________________________
Telephone Number: (_________) ___________________
E-Mail Address: ___________________________________
Original Date of Purchase: _______/_________/__________
Product Model #: __________________________________
Serial # (if applicable): ____________________________

ADDITIONAL ACCESSORIES AVAILABLE
Apple & Fruit Crusher 05-0201
Fruit & Wine Press 05-0101
-3-
-6-
ATTACHING THE HOPPER/WALL MOUNT
1. Remove both sets of nuts,
washers and carriage bolts
securing the mounting board to
the top feet on the Apple & Fruit
Crusher. FIGURE 7
2. Set the assembled Hopper on
top of the Apple & Fruit Crusher.
FIGURE 8
3. Attach the Left Mounting
Bracket to the top foot on the
Apple & Fruit Crusher with the
1½” Machine Screw, two Flat
Washers & Hex Locking Nut (G).
FIGURE 9
4. Attach the Right Mounting
Bracket to the top foot on the
Apple & Fruit Crusher with the
1½” Machine Screw, two Flat
Washers & Hex Locking Nut (G).
ATTACHING THE HOPPER TO THE APPLE & FRUIT CRUSHER* IN THE WALL
MOUNT POSITION:
Figure 7
Remove Both Sets
Figure 8
Figure 9
*Apple & Fruit Crusher Sold Separately.
NEVER reach into the Chute or Main Body.
Failure to do so, may cause personal injury.
CAUTION!
These products and many more products can be ordered by visiting
www.westonsupply.com or by calling
Pragotrade LLC Toll Free at 1-800-814-4895
Monday thru Friday 8:00am-5:00pm EST.
Outside the U.S. call 440-638-3131
GENERAL SAFETY RULES
WARNING!
1. NEVER usengerstoscrapefoodaway
fromthecrushingdrum.Severeinjurymay
result.
2. KEEP ngers and hands clear of the
crushing drum and stainless steel blades
at all times. NEVER reach into the chute
or main body.  Failure to keep ngers
and hands out of main body may result in
personalinjury.
3. Tie back loose hair and clothing, and
roll up long sleeves before operating the
crusher. Remove ties, rings, watches,
bracelets,orotherjewelrybeforeoperating
thecrusher.
4. DO NOT use the Hopper while under
the inuence of drugs, medications, or
alcohol.
6. BE SURE the Hopper is correctly
mounted,stableandsecurebeforestarting
tocrushapplesorfruit.
SAVETHESEINSTRUCTIONS!
Refer to them often and use them to instruct others.
READ AND FULLY UNDERSTAND ALL INSTRUCTIONS
AND WARNINGS PRIOR TO USING THIS UNIT. YOUR
SAFETY IS MOST IMPORTANT! FAILURE TO COMPLY
WITH PROCEDURES AND SAFE GUARDS MAY
RESULT IN SERIOUS INJURY OR PROPERTY DAMAGE.
REMEMBER:YOURPERSONALSAFETYISYOUR
RESPONSIBILITY!
7. KEEP children away from the unit.
Neverleavethecrusherunattended.
8. Check for damaged or missing parts
before using the Hopper. Ensure all parts
are operating properly and perform the
intendedfunction.Ifanypartsaredamaged
or missing, please contact Customer
Service.
9. The manufacturer declines any
responsibilityincaseofimproperuseofthis
product.
11. This product is not intended for
commercialuse.Commercialusewillvoid
thewarranty.
NEVER reach into the Chute or Main Body.
Failure to do so, may cause personal injury.
CAUTION!

-4- -5-
1. Align the pilot holes on the Left
Side Board (B) with the through
holes on the Back Board (A).
2. Afx the Left Side Board (B) to
the Back Board (A) with 3 Wood
Screws (H). FIGURE 1
3. Align the pilot holes on the Right
Side Board (C) with the through
holes on the Back Board (A).
4. Afx the Right Side Board (C) to
the Back Board (A) with three Wood
Screws (H). FIGURE 2
5. Align the pilot holes on the Left
Side Board (B) with the through
holes on the Front Board (D).
6. Afx the Left Side Board (B) to
the Front Board (D) with three Wood
Screws (H). FIGURE 3
7. Align the pilot holes on the Right
Side Board (C) with the through
holes on the Front Board (D).
8. Afx the Right Side Board (C) to
the Front Board (D) with three Wood
Screws (H). FIGURE 3
9. Attach the Left Mounting
Bracket (E) to the Back Board (A)
with the 1” Machine Screw, Washer
and Hex Locking Nut (F). FIGURE 4
10. Attach the Right Mounting
Bracket (E) to the Back Board (A)
with the 1” Machine Screw, Washer
and Hex Locking Nut (F).
ASSEMBLY INSTRUCTIONS
Figure 1
Figure 2
Figure 3
Figure 4
AB
A
C
B
D
B
C
A
A
C
B
ATTACHING THE HOPPER/TABLE MOUNT
1. Set the assembled Hopper on
top of the Apple & Fruit Crusher*.
FIGURE 5
2. Attach the Left Mounting
Bracket to the top foot on the
Apple & Fruit Crusher with the
1½” Machine Screw, two Flat
Washers & Hex Locking Nut (G).
FIGURE 6
3. Attach the Right Mounting
Bracket to the top foot on the
Apple & Fruit Crusher with the
1½” Machine Screw, two Flat
Washers & Hex Locking Nut (G).
TO ATTACH THE HOPPER TO THE APPLE & FRUIT CRUSHER* IN THE
TABLE MOUNT POSITION:
Figure 5
Figure 6
*Apple & Fruit Crusher Sold Separately.
NEVER reach into the Chute or Main Body.
Failure to do so, may cause personal injury.
CAUTION!