WGI Innovations Cyclone MC1 User manual

Model # MC1
YOUTH METAL
DETECTOR
602 Fountain Parkway
Grand Prairie, TX 75050
800.847.8269
“Ground EFX”and“Cyclone”areTM trademarks of WGI Innovations, LTD.
“Sport Responsible” is a TM trademark of WGI Innovations, LTD. User’s Manual

l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
Turn ON
Rotate left knob to click power to the unit
Battery Test
To test battery, rotate right knob counter-clockwise
until it clicks while the unit is powered ON. The needle
on the Target Indicator should move to BATT OK.
Adjust Sensitivity
Rotate left knob clockwise to increase sensitivity
(Reduce sensitivity if the detector emits false signals; the detector is probably reacting to electromagnetic interference for the soil
Installing Batteries
Open the battery door by undoing the door latch. Place
the 9V batteries in the compartment and attach the connectors
to the batteries. Latch the door closed. Do not use Heavy Duty
batteries or Zinc-Carbon batteries. Do not mix old and new
batteries.
Adjusting Length
Lift the handle latch located on the tube. Extend the
tube to the desired length. Lock the handle latch back into
place to secure.
Assembly
Remove the plastic bolts on the top of
the coil. Fit the rod inside the bracket on the
coil. Insert the plastic bolts into the bracket and
through the bottom rod. Then tighten but do
not over tighten.
Door Latch
Handle Latch
Battery Connectors

l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
Eliminator
Rotate right knob clockwise to eliminate unwanted
metals from detection. As the right knob is turned clockwise,
metals are progressively being eliminated from detection.
Refer to the scale for the relative positions at which dierent
types of metal are eliminated.
Pinpointing
Once a buried target is identied by a good target
indicator or tone response, continue sweeping the coil over
the target in an “X” pattern. Make a visual note of the place on
the ground where the tone is heard from both directions. Then
dig in the center of the“X”.
Directions
1. Turn the left knob clockwise to turn the unit on
2. Make sure the elimination knob is clicked to the right , not in battey test mode.
3. Keep the coil parallel to the ground
4. Keep the coil about 1/2” o the ground
5. Use the detector Outdoors Only
6. Adjust sensitivity down if false readings happen often.
6. Some objects like gold and nickel can be eliminated from detection in the middle
of the eliminator range.
7. Only the coil and rod are able to be under water. Do not submerge the rest of the
unit.
8. Observe all laws (national, state and local) and rell your holes.
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
Iron
No
Elimination
Small Gold
Objects
Large Gold
Objects/Silver
Battery
Test
Zinc
Nickel,
Pull Tabs

DISCLAIMERS
WGI Innovations, LTD is not responsible for damage, expense or injury caused by the unauthorized
use of, alterations to, improper connection of and abuse or neglect of the WGI Innovations™
products.
WARRANTY
You must register your product warranty online at www.wildgameinnovations.com. Follow the
onscreen directions to complete the process.
WGI Innovations, LTD will replace any product that may encounter material or workmanship defects
free of charge for ONE (1) YEAR after the date of purchase and thereafter the cost will vary per
incident.
This warranty DOES NOT COVER damage, expense or injury caused by unauthorized repairs,
alterations, improper connection, shipping, abuse, theft, accident, neglect or collateral loss.
When returning product for service you MUST obtain a Return Merchandise Authorization (RMA)
number from WGI Innovations, LTD. Please include name, UPS address (no P.O. Box), telephone
number, RMA number and a complete description of the problem on all enclosed correspondence.
When possible, pack product carefully in original carton. Customers are responsible for any
shipping cost to WGI Innovations™. WGI Innovations will pay shipping cost of replacement product
to the customer. We are not responsible for damage incurred in returning items for repair.
CUSTOMER SERVICE
WGI Innovations, LTD stands behind every product we manufacture for a one year product
workmanship warranty and a strong commitment to customer service. If you are in need of
customer service for missing parts or need assistance with the operation or assembly of your
product, we encourage you to call one of our customer service representatives and let us assist you
with your WGI Innovations™ product.
DISCLAIMER
WGI Innovations, LTD reserves the right to make changes to product features, functionality and
physical design at its sole discretion. As a result, such changes may not be reected in this version
of the manual.
FCC STATEMENT
Product Name: Metal Detector
Trade Name: Ground EFX
Model# MC1
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
criteria: (1) This device may not cause harmful interference, and (2) This device must accept any
interference received, including interference that may cause undesired operation.
Warning: Changes or modications to this unit not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates, uses
and can radiate radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment o and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit dierent from that to which the receiver is
connected.
-Consult the dealer or an experienced radio/TV technician for help.