Whelen Engineering Company WS60T User manual

Page 1
©1990 Whelen Engineering Company Inc.
Form No.13057 (101816)
51 Winthrop Road
Chester, Connecticut 06412-0684
Phone: [phone]
Internet: www.whelen.com
Sales e-mail: [email protected]
Customer Service e-mail: [email protected]
Mass Notification
®
ENGINEERING COMPANY INC.
For warranty information regarding this product, visit www.whelen.com/warranty
Model WS60T Speaker Assembly
P/N: 01-1461236-00
1.53” x .53” SLOT
Mounting Bracket Detail
.53” DIA
2.0” 2.0”
General-
Whelen Model WS60T is a 60 watt
speaker assembly intended for use in
indoor personnel warning applications,
where high sound level output is
required.
The speaker flare is made from
fiberglass, with a spun aluminum re-
entrant section. a speaker driver, with
wire leads, is assembled to the speaker.
A heavy-duty, painted steel mounting
bracket allows the installer to position the
speaker in a number of different ways.
An internal impedance matching
transformer allows the user to select
reduced power levels.
Installation-
Determine the location of the speaker.
Mount to a rigid structure, using the
supplied mounting bracket. The bracket
dimensions are shown in the detail
drawing. Position the speaker as
required. Do not position the speaker
pointing upward, if there is a possibility of
filling with water.
Speaker connections are made by
removing the plastic cover and
connecting one audio wire to the “-”
terminal and the other audio to the
desired tap terminal. The “+” terminal is
full power.

Page 2
23”
DIMENSIONS
22”
10”
8”
12”
Dimensions
Height: 12” (30.4 cm)
Width: 22” (55.8 cm)
Depth: 23” (58.3 cm)
Weight: 21 lbs. (9.5 kg)
Finish
Speaker: Black
Performance
SPL: 60W 123 dbA (at 4 ft., 500 Hz)
40W 121 dbA
20W 118 dbA
10W 115 dbA
5W 112 dbA
2.5W 109 dbA
Dispersion: °120 x 60°
WS60T SPEAKER ASSEMBLY PRODUCT SPECIFICATIONS
Notes: 1. Not for use in classified areas.
2. SPL (Sound Pressure Level) readings are +/- 2 dbA.
3. Performance measured with Whelen Amplifier, 01-0285564-00C