Whirlpool AWT 4089 User manual

5019 312 10029
Whirlpool is a registered trademark of Whirlpool USA.
N.B. This machine is controlled by sensors. Please avoid excessive detergent dosing.
Programme Type of wash / Notes
Max.
load
kg
Detergents and additives Options Temperature
Selector
°C
Maximum
Spin
Speed
rpm
Programme
time
approx.
min.
Prewash Main
Wash Softener Bleach Eco Wash Intensive Rinse Rinse Hold
Cotton with
Prewash
Heavily soiled sheets, tablecloths, underclothes, shirts etc. in hard wearing and high
temperature resistant cotton.
The maximum load for heavily soiled washing is 3.5 kg. 5.0 Yes 1) Yes ❉❉❉❉❉
from to 90 800 130
Cotton Moderately soiled sheets, tablecloths, underclothes, towels etc. in hard wearing and high
temperature resistant cotton. 5.0 —1) Yes ❉❉❉❉❉
from to 90 800 115
Coloured Averagely soiled blouses, shirts etc. made of polyester (Diolen, Trevira); polyamide (Perlon,
Nylon), or cotton blends. 2.0 —1) Yes ❉——❉❉
from to 60 800 100
Quick Wash Blouses, shirts, cotton blouses, dark coloured terry towelling, jeans, etc. lightly soiled. 5.0 —1) Yes ❉——❉❉
from to 40 800 85
Synthetics Lightly soiled shirts, blouses etc., made of polyester (Diolen, Trevira), polyamide (Perlon,
Nylon) or cotton blends. 2.0 —1) Yes ❉——❉❉
from to 40 500 2) 70
Rinse + Spin This programme allows starch or softener to be added.
It is followed by an intensive spin cycle. 5.0 —1) —❉———❉800 20
Spin Programme for intensive spin cycle. 5.0 —1) —————— —80015
Delicate Delicate fabrics and curtains (dresses, skirts, shirts, blouses, etc.). 1.5 —1) Yes ❉———❉from to 40 400 3) 55
Wool Machine washable woollens with pure new wool label.
If the “Rinse Hold” option is selected don't leave the wash to soak for too long. 1.0 —1) Yes ❉————
from to 40 400 3) 45
Rinse + Spin This programme allows starch or softener to be added.
It is followed by a gentle spin cycle. 1.5 —1) —❉———❉400 3) 15
Spin Programme for gentle spin cycle. 1.5 —1) —————— — 400 3) 10
Drain Drain only, without spin cycle.
Alternative way to end programmes after a “Rinse Hold”. ——
1) —————— — — 5
“Cold”
“On/Off”
❉: option / Yes: dosing required
1) Do not use liquid detergents.
2) For improved garment care spin speed is restricted to
500 rpm in this programme.
3) For improved garment care spin speed is restricted to
400 rpm in this programme.
Programme duration figures (guideline) are valid
for maximum temperature wash with no special
functions.
AWT 4089
GB

5019 312 10029
Whirlpool is a registered trademark of Whirlpool USA.
Prewash cycle increases programme duration approximately 15 min. Consumption values were measured in normalized
conditions in compliance with standard IEC 60 456. Consumption data in the home may vary with respect to the values in
the table in relation to the water supply pressure and temperature, the load and the type of wash. The data on the “Energy
Label”refer to the programme “Coloured Cotton 60°C”.
* The remaining time indicator can similarly deviate from the values in the table, because it takes into account the
household conditions applicable at that time.
**To reduce the water temperature, some cold water is added at the end of the main wash cycle, before the pump drains
the water out.
1. Close the drum flaps and check that they are
properly locked.
2. Add detergents and additives into the dispenser
to no more then the “MAX“level mark, as
follows:
•Programme with pre and main wash
•Main wash programme without prewash
•Fabric softeners and conditioners
•Chlorine bleach
•Stain remover agents
•Ant-scale agents (if necessary)
3. Turn the programme selector knob clockwise to
the desired programme.
4. Turn the temperature knob to the required
temperature.
5. Turn the spin speed knob to the required
spin speed.
“Eco Wash”button
•The wash time is extended and the water
temperature is reduced.
•This function saves about 30% in energy without
compromising the excellent results of the wash.
“Intensive Rinse”button
•The water level increases for improved rinsing
efficiency.
•This option is particularly suitable for areas with
very soft water when washing baby linen and
helps people with skin allergies.
•For improved garment care it is advised to use
the option for the Cotton 90°C and the Coloured
60°C programme.
“Rinse Hold”button
•The laundry remains in the last rinse water,
without progressing to the spin cycle to avoid
creasing and prevent colours from changing.
•This option is especially recommended for the
“Synthetics”or “Delicate”programmes.
•This option is perfectly suitable if you wish to
postpone the spin or you don't wish to spin the
clothes.
ENERGY AND WATER CONSUMPTION DATA
Programme Temperature
(°C)
Load
(kg)
Water
(l)
Energy
(kWh)
Programme time
(min)
Cotton 90 5.0 72 1.80 115
Cotton 60 5.0 72 1.15 115
Coloured 60 2.0 66 0.80 100
Coloured 40 2.0 66 0.40 100
Quick Wash 40 2,5 54 0,50 85
Delicate 40 1.5 70 0.65 55
Wool 40 1.0 70 0.55 45
PREPARATION OF WASH CYCLE PRESS ANY DESIRED OPTION BUTTON(S)
Note: the programme selector stops on “”.
Terminate the “Rinse Hold”option.
•Press the “Rinse Hold”button again; the
programme will terminate automatically with
the spin cycle corresponding to the previously
selected wash programme.
•If you do not wish to spin the clothes, switch
off the appliance by pressing the “On/Off”
button. The pilot light goes out. Turn the
programme selector to the “Drain”position and
switch on the appliance.
Open the water inlet tap and press the “On/Off”
button. The pilot lamp lights up.
During the running programme, the door cannot be
opened.
The door locks automatically in all programmes.
If the programme is stopped or if an electrical
power failure occurs, the door unlocks
automatically after about 1 minute.
•The programme selector knob is at “STOP”, the
pilot lamp lights.
1. Press the “On/Off”button. The pilot light
goes out.
2. Cancel the options by pressing the appropriate
buttons.
3. Turn the water supply tap off.
4. Wait for the door to unlock (about 1 minute).
5. Open the door and the drum flaps and unload
the machine.
1. Press the “On/Off”button to switch off the
appliance.
The pilot light goes out.
2. Select the new programme, temperature, spin
speed and options.
3. Press the “On/Off”button to switch on the
appliance.
The pilot light lights.
1. Press the “On/Off”button to switch off the
appliance.
The pilot light goes out.
2. Set the programme selector on “Drain”.
3. Press the “On/Off”button to start the “Drain”
programme.
Only open the door when the programme
selector is at “STOP”and the door is unlocked
(after approximately 1 minute).
•After switching your washing machine on, it
does not start immediately: it needs some
seconds in order to lock the door, fill water and
then drum starts turning.
•Spinning has an interrupted start-up: the drum
starts and stops running several times, to
improve spin efficiency and to better balance
the laundry.
•At the end of the spinning cycle the drum goes
on reversing for some minutes: this helps you
unloading the laundry.
•Do not exceed in detergents dosage: excessive
foam formation may prevent spinning.
•Your imbalance detection and correction
system reduces spin speed or interrupts the
spin automatically in case of imbalance load -
see “troubleshooting guide”.
•Your machine has a new, electronically-
controlled motor: don't be surprised by its
sound.
•If you want to change the programme during
the wash cycle, remember to switch the
machine off before turning the programme
selector knob.
PROGRAMME START
DOOR LOCK
PROGRAMME END
SELECTING A NEW PROGRAMME, SPIN SPEED,
OPTIONS AFTER PROGRAMME START
TO STOP, RESET A PROGRAMME BEFORE THE END
NOTES AND INDICATIONS FOR USE