Whirlpool FULL ELECTRONIC WASHING MACHINE User manual

GB
Programme
Tempe-
rature
Care
Labels
Max.
Load
kg
Type of wash / Notes
- respect the manufacturer's recommendations on the care label
Detergents and Additives Special options Max
Spin
Speed
rpm
Pre-
wash Main
Wash Softener Clean+ Pre-
wash Start delay Easy ironing Intensive rinse Rinse hold Variable spin
White Cotton/
Antibacterial 70 - 95 °C 6.0 Normally to heavily soiled bed linen, table linen and underwear, towels, shirts etc.
made of cotton and linen.
At the temperature “Cotton 80° or more, this programme eliminates bacteria, ensuring
sanitization of your laundry. The bacterial removal efficiency has been tested following
a similar methodology to the NF EN 13697 standard of Nov. 2001
Yes         Max.
Cotton 60 °C 7.0
Cotton 20 - 50 °C 5.0
Synthetics 20 - 60 °C 2.5 Normally soiled blouses, shirts, overalls etc. made of polyester (Diolen, Trevira),
polyamide (Perlon, Nylon) or blends with cotton. Yes         1000 1)
Daily load 20 - 60 °C 3.0 Slightly to normally soiled textiles made of cotton and/or synthetics. – Yes – –      Max.
Quick wash 20 - 30 °C 3.0 Shortly worn outer clothing made of cotton, polyester, polyamide and blends with
cotton. – Yes – – – –   Max.
Delicates 20 - 40 °C 1.5 Curtains and delicate clothing, dresses, skirts, shirts and blouses. Yes –  – –   1000 1)
SuperEco 20 - 60 °C 6.0
Slightly to normally soiled bed linen, table linen and underwear, towels, shirts etc.
made of cotton and/or linen.
Offers highest economy in energy consumption by prolonged wash duration. Ideal to
be run overnight to additionally profit from the more favourable energy rates. To avoid
noise of spinning at night, set spin speed to “0” and start spin programme in the
morning, or define programme start with “Start Delay” accordingly.
– Yes – – –   Max.
Lingerie 20 - 30 °C 1.0 This programme is particurarly suitable to treat delicate lingerie (use of laundry net
strongly recommended). – Yes – – – –   400 1)
Wool 20 - 40 °C 1.0
Only woollens labelled with the woolmark and identified as machine washable.
– Yes – – – –   1000 1)
Handwash 20 - 40 °C 1.0 Textiles made of linen, silk, wool and viscose marked as “handwashable”. – Yes – – – –   400 1)
Rinse & Spin – – 6.0 Same as the last rinse and the final spin in the “Cotton” programme. – – – –  –   Max.
Spin – – 6.0
In this programme spinning is intensive. Same as the spin cycle in the
“Cotton” programme.
– – – – – – – – Max.
Gentle Spin – – 1.0 In this programme spinning is gentle. Same as the spin cycle in the “Wool”
programme. – – – – – – – – 1000 1)
Drain – – – Drain only - no spinning. Alternative method of terminating programme after
“Rinse hold”. – – – – – – – – – –
A. “Door open” indication
This washing machine is equipped with
automatic safety functions which detect
and diagnose faults at an early stage
and react appropriately, e.g.:
B. “Service” indication
C. “Water tap closed” indication
D. “Clean pump” indication
E. Programme selector
F. “Start/Pause” button
G. Variable spin speed button
H. Programme sequence indicator
I. “Reset” button
J. “Start delay” button
K. “Temperature” button
L. Display
 : option / Yes : dosing required
1) For improved garment care spin speed is restricted in these programmes.
PROGRAMME CHART
A
B
H
F
E
G
C
D
J
I
K
5019 301 01057
Whirlpool is a registered trademark of Whirlpool USA.
L

Programme Temperature
(°C)
Load
(kg)
Water
(l)
Energy
(kWh)
Approx. Programme
Duration
(hours : minutes)*
White Cotton/ Antibacterial 95 6.0 59** 1.90 2:00
Cotton *** 60 7.0 54 1.19 2:20
Cotton 40 5.0 56 0.70 2:00
Synthetics 60 2.5 50** 0.80 1:35
Synthetics 40 2.5 46 0.50 1:20
Daily load 40 3.0 41 0.50 1:00
Quick wash 30 3.0 41 0.40 0:30
Delicates 30 1.5 60 0.50 0:45
SuperEco 60 6.0 51 0,72 4:00
Lingerie 30 1.0 45 0.40 0:36
Wool 40 1.0 60 0.50 0:45
Handwash 40 1.0 45 0.50 0:40
CONSUMPTION DATA
Consumption values were measured in normalized conditions in compliance with standard IEC/EN 60 456. Consumption data in the home
may vary with respect to the values in the table in relation to the water supply pressure and temperature, the load and the type of wash.
* The remaining time indicator can deviate from the values in the table, because it takes into account the household conditions
applicable at that time.
** T
o reduce the water temperature, some cold water is added at the end of the main wash cycle, before the pump drains the water out.
*** Reference Programme for Energy Label.
ADD DETERGENTS, CLOSE THE DOOR AND
SELECT THE PROGRAMME
SELECT ANY DESIRED OPTION
“DOOR OPEN” INDICATION
Before starting and after end of a programme, the
lamp lights to show the the door can be opened.
As long as a wash programme is running, the door
remains locked and must on no account be forced open.
In case you have an urgent need to open it during a
running programme, refer to “Cancel (Reset) a running
programme before the end”.
RED INDICATIONS
“Service”
Lighting up of the “Service” indication can be caused
by a fault in an electrical component. Refer to the
“Troubleshooting Guide” in your “Instructions for Use”;
if the fault persists, contact our After Sales Service.
“Water tap closed”
The appliance has no or insufficient water supply. Open
the water tap: if the indications still lights up, refer to the
“Troubleshooting Guide” in the Instructions for Use.
“Clean pump”
Waste water is not pumped out. Check whether the
drain hose is kinked or the filter must be cleaned: in the
latter case refer to the Instructions for Use (“Removing
the Filter”).
Push the button(s) of any option(s) desired - the
respective indication lamp lights up.
When the combination of programme and additional
option(s) is not possible, the indication lights switch off
automatically. Unsuitable combinations of options are
deselected automatically.
“Clean+” button
• Choose this option if you use an in-wash additive for
stain removal (powder, for example “Vanish”) - it will
optimize the additive’s efficiency to get better wash
performance and stain removal.
• Selectable for programmes “
Cotton” and “Synthetics”;
choose temperature of 30 or 40°C and use with
maximum load.
• Add an appropriate amount of in-wash additive for
PROGRAMME START
Open the tap and press the “Start/Pause” button.
The indication lamp next to the “Start/Pause” button
lights up. The programme sequence indicator shows the
current programme phase, running from left to right
through Wash, Rinse, Spin/Drain.
The time display shows the remaining programme
time. Due to variations in load and temperature of inlet
water, the remaining time is newly calculated in certain
programme phases. If this is the case, an animation
appears on the time display.
PROGRAMME END
• All the lights of the programme sequence indicator
are off, and the “Door open” indication lights up.
1. Turn the programme selector to the “Off/O” position.
2. Close the water tap.
3. Open the door and unload the machine.
4. Leave the door ajar to allow the drum to dry.
CHANGE PROGRAMME AND/OR OPTIONS
AFTER PROGRAMME START
1. Press the “Start/Pause” button to pause the
programme. The lamp blinks.
2. Select the new programme, temperature, any
options and another spin speed if you want.
3. Press the “Start/Pause” button again. The new
programme continues at the same position where
the previous programme was interrupted. Do not
add detergent for this programme.
CANCEL (RESET) A RUNNING PROGRAMME
BEFORE THE END
The “Reset” button cancels a programme before the
end.
• Press the “Reset” button for at least 3 seconds;
“rES” appears on the display. Any existing water is
drained out before the door can be opened.
stain removal (powder) to the main wash chamber,
together with your detergent (only use powder
detergent with this option).
Respect the manufacturer’s dosing instructions.
• P rolongs the programme by approx. 10 to 15 minutes .
• Appropriate for use of stain removers and bleaches
on oxygen basis.
Chlorine or perborate bleaches must not be used!
“Prewash” button
• Only for heavily soiled loads (for example sand,
granular dirt) sensible. Increases the cycle time by
approximately 15 min.
• Do not use liquid detergent for the main wash when
activating the “Prewash” option.
“Easy ironing” button
• Can be used together with “Cotton”, “Synthetics”
and “Daily load” programmes to make ironing easier.
• Increases the water quantity and the clothes are spun
very gently.
“Intensive rinse” button
• More water is added and rinse cycle is prolonged.
• This option is particularly suitable for areas with very
soft water, washing baby linen and helps people with
allergies.
“Rinse hold” button
• The laundry remains in the last rinse water without
pregressing to the final spin cycle to avoid creasing and
prevent colours from changing.
• This option is particularly recommended for the
programmes “Synthetics”, “Daily load” and “Delicates”.
• It is particularly useful if you want to postpone
spinning to a later time, or if you want to drain only.
The “Start delay” allows to run the machine at the
consumer’s convenience, for example at night when
electricity is cheaper. Do not use liquid detergent when
activating “Start delay”.
• Select programme, temperature and options.
• Press the “Start delay” button to select the delay time
by 1 to 23 hours.
• Press the “Start/Pause” button.
The countdown of the delay time begins; the “Start
delay” indication lamp and the dot on the display will
keep blinking until the programme starts.
• The time delay indication disappears when the
programme starts and it is replaced by the remaining
programme time.
• Once having pressed the “Start/Pause” button, the
number of hours preselected can be reduced by
pressing again the “Start delay” button. From 1 hour
on, the delay time can also be reduced in steps of 10
minutes.
To cancel the “Start delay”
...before you press the “Start/Pause” button:
• Turn the programme selector to another position or
press the “Reset” button.
...after having pressed the “Start/Pause” button:
• Press the “Reset” button for at least 3 seconds - the
start delay time disappears from the time display.
START DELAY
Add detergents as indicated on the front page and as
described in the chapter “Detergent and Additives” in
your Instructions for Use.
1. Turn the programme selector to the desired
programme. The display shows the programme
duration in hours and minutes as well as the
predefined temperature. The “Start/Pause”
indication lamp blinks.
2. The temperature can be altered by pressing the
“Temperature” knob.
3. The indication lamp of the predefined spin speed
lights up; in case you want to set another spin speed
press the “Spin speed” buttton.
• If you select “Rinse hold” do not leave items to soak
for too long.
Note: The programme stops to “Rinse hold” at the
time the “Rinse hold” lights in the preogramme
sequence indication is on. The indication lamp next to
the “Start/Pause” button blinks.
Terminate the “Rinse hold” option:
• Press the “Start/Pause” button; the programme will
terminate automatically with the final spin cycle for the
present wash programme.
• If you do not wish to spin the clothes, turn the
programme selector knob to the “Drain” programme
and press the “Start/Pause” button.
“Variable spin” button
• Every programme has a predefined spin speed.
• Press the button to set another spin speed.
• If spin speed “0” is selected, the final spinning is
cancelled but intermediate spin peaks remain during
rinse. The water is drained out only.
5019 301 01057
Whirlpool is a registered trademark of Whirlpool USA.