White-Westinghouse WFG16DRPRA User manual

WFG16DRPRA
WFG16DRWRA
WFG16CRPRA
WFG16CRWRA
WFG19DRWRA
WFG19CRWRA
www.white-westinghouse-intl.com

FastFreeze
If you need the temperature inside the freezer
to drop rapidly, press the FASTFREEZE button,
allthe LEDindicatorarefull light, the freezer
compartmentwilloperateinFASTFREEZEmode
for24 hours,and the setting temperatureis-23
If you change the temperature setting,the fridge
willexit FASTFREEZE mode.
C.
ATTENTION: Normally we advise you setting the
temperatureon “Mid”position.A coldersetting onthe
temperatureregulatormeans moreenergywill be
consumed.In FASTFREEZEmode thecompressor
will runcontinuouslyorevennon-stop!
FRIDGETEMPERATURE
When the machine is not in the temperature
setting mode,If you want tosetthe temperature
inside the fridge,you can followthe twosteps
below:
1.Press “select”button,until the fridgelightison,
and the LEDindicatorwillindicatethe current
temperature setting infridge.
2. Then you can set the temperaturefrom1 to
9 bypressing and ,pressthe buttononce,the
temperaturewillincreaseordecrease1 ,and
the LEDindicator willturndownorturnup
between “cold”and “colder”, until the required
temperature is displayed.Thereisa
corresponding relationshipbetween temperature
setting and indicatorlights,you can find itoutin
the sametableupper.
C
C
C
1.Remove the light cover .
2.Use the cross screw driver to take the
screw out.
3. Pull out the jointcable,andtakedown
theoldLED light.
4. Replace with anew LED light that is
same to the origin, screw the screw in.
Unplugthemains plug.
Press thebulbinthecenterwithfinger.
Warning! If theLEDlightbulbis
damaged,DO NOTCHANG ITBY
THEUSER!
Beforechangingthelightbulb,switchoff
theapplianceandunplugit, orpull the
fuseorthecircuit breaker.
Toswitchoff the appliance.
Changing the lightbulbcarryoutby
inexperiencedpersonsmaycauseinjuryor
seriousmalfunctioning.it must bereplaced
byaqualifiedpersonsinordertoavoida
hazard.Contact your localServiceForce
Centerforhelp.
Changingthelightbulb
Beforechangingthelightbulb,eitherthe
refrigeratorordisconnecttheelectricity
leadingintotherefrigeratoratthemain
powersupply.Failuretodo socouldresult in
electrical shockorpersonalinjury.
The freezer compartment consist of2
sections. Oneis the4-starsectionandthe
otherone is the2-starsection.
The temperature for2-starsectionis
always below-12 C,where the
temperaturefor4-starsectionis
always below -18 C.
5

Descriptionoftheappliance
6
Note: Duetounceasingmodificationof ourproducts yourrefrigerator may beslightly different
fromthis InstructionManual, butits functionsandusingmethodsremainthesame.
REFRIGERATOR
FREEZER
Viewoftheappliance
Note: Duetounceasingmodificationof ourproducts yourrefrigerator may beslightly different
fromthis InstructionManual, butits functionsandusingmethodsremainthesame.
(WFG16DR)
1
2
3
4
5
6
7
8
9
10
11
12
13
17
1415 16
18
19
20
21
22
24
25
23
1
2
3
4
5
6
7
8
9
10
11
12
13
17
14 15 16
18
19
20
21
22
24
25
23
REFRIGERATOR
FREEZER
1. Screw hole cover
2. Wind channel part in freezer chamber
3. Shelf part
4. Ice tray part
5. Icebox
6. Light cover
7. LED light(inside)
8. Wind channel part in refrigerator chamber
9. Shelf part
10.shelves assembly
11. Crisper box part
12. Roll wheel
13.Adjustable bottom feet part
14. Upper hinge cover
15. Door switch
16.Freezerdoorrack
17.Gasket part
18. Middle hinge part
19.Shelf cover
20. Egg tray
21. Small shelf
22.Door switch
23. Refrigeratordoorrack(middle)
24.Gasket part
25.Refrigerator doorrack(lower)
Viewoftheappliance
1. Screw hole cover
2. Wind channel part in freezer chamber
3. Shelf part
4. Ice tray part
5. Icebox
6. Light cover
7. LED light(inside)
8. Wind channel part in refrigerator chamber
9. Shelf part
10.shelves assembly
11. Crisper box part
12. Roll wheel
13.Adjustable bottom feet part
14. Upper hinge cover
15. Door switch
16.Freezerdoorrack
17.Gasket part
18. Middle hinge part
19.Shelf cover
20. Egg tray
21. Small shelf
22.Door switch
23. Refrigeratordoorrack(middle)
24.Gasket part
25.Refrigerator doorrack(lower)
( )WFG19DR

3. Insert expansion bolts in the hole and
remove nuts, shrapnel and washers.
4.Install it by following schematic diagram,
then tighten the nut.
Warning! Before installing, read the
instructions carefully for your safety
and the correct operation of the appliance.
Position the appliance away from sources
of heat such as stoves, radiators, direct
sunlight, etc.
Maximum performance and safety are
guaranteed by maintaining the correct
indoor temperature for the class of unit
concerned, as specified on the rating
plate.
Before using the appliance for the first
time, wash the interior and all internal
accessories with lukewarm water and
some neutral soap so as to remove the
typical smell of a brand new product, then
dry thoroughly.
Leveling
the floor. You can also adjust the level by
the appropriate level
the front (use your fingers or a suitable
spanner).
unscrewing adjustment
in
The appliance should be level in order to
eliminate vibration. To make the appliance
level, it should be upright and both
adjusters should be with in stable contact
First use and installation
Cleaning before use
Installation Positioning
7
adjustable
bottom feet
part
Warning! The appliance must be
fastened to the wall for safety reason.
Take the bag located supplied with the
appliance. It contains the following
accessories:
1 fixed board
2 Expansion bolts
Proceed as follows to carry out the fastening:
1.Find the appliance's position center.
2.Measure 60mm from the floor. Drill two
holes with diameter of 8mm, depth of
40mm.One hole is 110mm from centerline,
another one is 190mm from centerline.
Fastening to the wall
5.Push the appliance to the wall.
Important! It is necessary to have good
ventilation around the refrigerator to allow for
the dissipation of heat, high efficiency,
19cm
11cm
6cm
centerline
washer
shrapnel
nut
Appliances must not be exposed to rain.
Sufficient air must be allowed to circulate
in the lower rear section of the appliance,
as poor air circulation can affect perfor-
mance. Built-in appliances should be
positioned away from heat sources such
as heaters and direct sunlight.
75mm
100mm
100mm
and low power consumption.
sufficiently cleared
refrigerator
refrigerator
sides, a
height
For this
reason, space should
be available around the . It is
advisable for there to be 75mm separating
the back of the to the wall at
least 100mm of space on its two
of over 100mm from its top and a
clear space in front to allow the doors to
open 160°.
Electrical connection
Caution! Any electrical work required to
install this appliance should be carried out by
a qualified or person.authorized
Warning!This appliance must be grounded.
The manufacturer declines any liability should
these safety measures not be observed.

Dailyuse
Accessories 1)
Movableshelves/trays
Variousglass,plasticstorageshelvesor
wiretrays areincludedwithyourappliance.
The wallsoftherefrigeratorareequipped
withaseriesofrunnerssothatthe
shelves canbepositionedas desired.
Positioningthedoorshelves
Topermit storage offoodpackagesof
various sizes, themiddledoorshelves can
beplacedat different heights.
Freezerfood compartment 2)
For freezing freshfoodandstoringfrozen
anddeep-frozenfood foralongtime.
VegetableDrawer
For storingfruit and vegetables.
Refrigeratorcompartment
For storingthefoodwhichneedsnot
beingfrozenanddifferentpartsuitablefor
different kindof food.
Thawingfood2)
Intherefrigeratorcompartment.
At roomtemperature.
Inamicrowaveoven.
Inaconventional orfanoven.
Foodoncethawedshouldbere-frozen
only inexceptional cases.
1)If the appliancecontainsrelated accessories
and functions.
2)If the appliancecontainsafreezercompartment.
Ice-cube tray
For makingiceandstoringice-cubes.
IceMaker:Twistice
Takeouttheicemakingtray.
Fillthewaterinlevelofline.
Placetheicemakingtrayinitsoriginalposition.
Whenicecubesareformed,clockwisetwistthe
knobtodropofficecubesintotheicebox.
8
Iceboxisinadvisabletobeusedtomakeice,
otherwiseitmaycrack.
Ifittakesalongtimetomakeice,pleasedonot
holdtheicetraydirectlytoavoidtheicetray
stickingandhurtingyourhands.
Notice:
Iceboxis
inadvisable
tomakeice
waterlevel
HumidityConditioning
Deferentvegetableandfruits needdeferent
humidity,youcancondition humidity inthe
crisperbox.
Adjust thehumidity conditioningslideblock
The humidity conditioningslideblock is onthe
crisperbox coverpart.
Slidetheblock rightorleft, thesizeoftheexit
fromwhichtheairescapeoutwill become
largerorsmaller.
Largersizeoftheexit meanslowerhumidity in
thecrisperbox. smallersizeoftheexit means
higherhumidity inthecrisperbox.

(WFG16DR)
(SASO)
(WFG19DR)

(WFG16DR)
(UAE)
(WFG19DR)

(SASO)
(W)
(WFG19DR) (WFG16DR)

(W)
(UAE)
(WFG19DR) (WFG16DR)