White-Westinghouse WR 747 SS User manual

Fridge - Freezer
User manual
ררקמ - איפקמ
שמתשמל ךירדמ
WR 747 SS

EN -2-
Index
BEFORE USING THE APPLIANCE ..................................................................... 4
General warnings .........................................................................................................4
Old and out-of-order fridges or freezer .........................................................................7
Safety warnings ............................................................................................................7
Installing and operating your fridge freezer ..................................................................8
Before Using your Fridge Freezer ................................................................................9
General features...........................................................................................................9
Installation your fridge freezer ......................................................................................9
YOUR FRIDGE FREEZER.................................................................................. 10
INSTALLATION YOUR FRIDGE FREEZER....................................................... 11
Before starting installation ..........................................................................................11
Prerequisites for installation.................................................................................................12
Overall dimensions .............................................................................................................13
Electrical requirements ........................................................................................................14
Plumbing requirements........................................................................................................15
Unpack the unit...........................................................................................................16
Position the unit ..........................................................................................................16
Levelling the unit.........................................................................................................16
Anti-tip bracket installation..........................................................................................17
In freestanding installation; ..................................................................................................17
In built-in installation; ...........................................................................................................18
Water line connection .................................................................................................18
Installing kickplate ......................................................................................................19
Door handle installation ..............................................................................................20
Drawer adjustment .....................................................................................................21
Optional accessories ..................................................................................................22
Water ltration system ................................................................................................23
USING YOUR FRIDGE FREEZER ..................................................................... 24
Control panel ..............................................................................................................24
Temperature control....................................................................................................24
Corona light mode................................................................................................................24
Door alarm sound mode ......................................................................................................25
Ice maker mode ...................................................................................................................25
Sabbath mode......................................................................................................................25
Fridge zone mode................................................................................................................25
Vegetable zone mode ..........................................................................................................26
Keypad sound mode............................................................................................................26
Display backlight mode........................................................................................................26
Date set mode......................................................................................................................27
Time set mode .....................................................................................................................27

EN -3-
STORAGE INFORMATION................................................................................. 28
Safety glass shelves...................................................................................................28
Tray runner .................................................................................................................29
Storage drawers .........................................................................................................30
Fresh bin.....................................................................................................................30
Storage drawer divider ...............................................................................................31
Ice-maker ...................................................................................................................31
Water ltration system ................................................................................................32
Water ltration bypass mode ......................................................................................32
Food storega guidance...............................................................................................33
Fridge compartment.............................................................................................................33
Freezer compartment ..........................................................................................................33
CARE AND MAINTENANCE .............................................................................. 36
Cleaning .....................................................................................................................36
Lighting information ....................................................................................................36
BEFORE CALLING YOUR AFTER SALES SERVICE....................................... 37
Service Information.....................................................................................................39
2.14 Installation Checklist...........................................................................................39
Certicates of Compliance..........................................................................................39
Tips for saving energy ................................................................................................40
FIRE
Warning; Risk of re / ammable materials

EN -4-
PART - 1. BEFORE USING THE APPLIANCE
General warnings
WARNING: Keep ventilation openings, in the appliance
enclosure or in the built-in structure, clear of obstruction.
WARNING: Do not use mechanical devices or other means
to accelerate the defrosting process, other than those
recommended by the manufacturer.
WARNING: Do not use electrical appliances inside the food
storage compartments of the appliance, unless they are of the
type recommended by the manufacturer.
WARNING: Do not damage the refrigerant circuit.
WARNING: When positioning the appliance, ensure the
supply cord is not trapped or damaged.
WARNING: Do not locate multiple portable socket-outlets or
portable power supplies at the rear of the appliance.
WARNING: In order to avoid any hazards resulting from the
instability of the appliance, it must be xed in accordance with
the following instructions:
If your appliance uses R600a as a refrigerant (this information
will be provided on the label of the cooler) you should take care
during transportation and installation to prevent the cooler
elements from being damaged. R600a is an environmentally
friendly and natural gas, but it is explosive. In the event of a leak
due to damage of the cooler elements, move your fridge away
from open ames or heat sources and ventilate the room where
the appliance is located for a few minutes.
• While carrying and positioning the fridge, do not damage the
cooler gas circuit.
• Do not store explosive substances such as aerosol cans with
a ammable propellant in this appliance.

EN -5-
• This appliance is intended to be used in household and
domestic applications such as:
- staff kitchen areas in shops, ofces and other working
environments.
- farm houses and by clients in hotels, motels and other
residential type environments.
- bed and breakfast type environments;
- catering and similar non-retail applications.
• If the socket does not match the refrigerator plug, it must be
replaced by the manufacturer, a service agent or similarly
qualied persons in order to avoid a hazard.
• A specially grounded plug has been connected to the power
cable of your refrigerator. This plug should be used with
a specially grounded socket of 16 amperes. If there is no
such socket in your house, please have one installed by an
authorised electrician.
• This appliance can be used by children aged from 8 years
and above and persons with reduced physical, sensory or
mental capabilities or lack of experience and knowledge if they
have been given supervision or instruction concerning use
of the appliance in a safe way and understand the hazards
involved. Children shall not play with the appliance. Cleaning
and user maintenance shall not be made by children without
supervision.
• Children aged from 3 to 8 years are allowed to load and
unload refrigerating appliances. Children are not expected
to perform cleaning or user maintenance of the appliance,
very young children (0-3 years old) are not expected to use
appliances, young children (3-8 years old) are not expected to
use appliances safely unless continuous supervision is given,
older children (8-14 years old) and vulnerable people can
use appliances safely after they have been given appropriate

EN -6-
supervision or instruction concerning use of the appliance.
Very vulnerable people are not expected to use appliances
safely unless continuous supervision is given.
• If the supply cord is damaged, it must be replaced by the
manufacturer, an authorised service agent or similar qualied
persons, in order to avoid a hazard.
• This appliance is not intended for use at altitudes exceeding
2000 m.
To avoid contamination of food, please respect the
following instructions:
• Opening the door for long periods can cause a signicant
increase of the temperature in the compartments of the
appliance.
• Clean regularly surfaces that can come in contact with food
and accessible drainage systems
• Store raw meat and sh in suitable containers in the
refrigerator, so that it is not in contact with or drip onto other
food.
• Two-star frozen-food compartments are suitable for storing
pre-frozen food, storing or making ice cream and making ice
cubes.
• One-, two- and three-star compartments are not suitable for
the freezing of fresh food.
• If the refrigerating appliance is left empty for long periods,
switch off, defrost, clean, dry, and leave the door open to
prevent mould developing within the appliance.

EN -7-
Old and out-of-order fridges or freezer
• If your old fridge or freezer has a lock, break or remove the lock before discarding it,
because children may get trapped inside it and may cause an accident.
• Old fridges and freezers contain isolation material and refrigerant with CFC. Therefore,
take care not to harm environment when you are discarding your old fridges.
Disposal of your old appliance
The symbol on the product or on its packaging indicates that this product
may not be treated as household waste. Instead it shall be handed over to
the applicable collection point for the recycling of electrical and electronic
equipment. By ensuring this product is disposed of correctly, you will
help prevent potential negative consequences for the environment and
human health, which could otherwise be caused by inappropriate waste handling of
this product. For more detailed information about recycling of this product, please
contact your local city ofce, your household waste disposal service or the shop
where you purchased the product.
Notes:
• Please read the instruction manual carefully before installing and using your appliance.
We are not responsible for the damage occurred due to misuse.
• Follow all instructions on your appliance and instruction manual, and keep this manual
in a safe place to resolve the problems that may occur in the future.
• This appliance is produced to be used in homes and it can only be used in domestic
environments and for the specied purposes. It is not suitable for commercial or common
use. Such use will cause the guarantee of the appliance to be cancelled and our company
will not be responsible for the losses to be occurred.
• This appliance is produced to be used in houses and it is only suitable for cooling / storing
foods. It is not suitable for commercial or common use and/or for storing substances
except for food. Our company is not responsible for the losses to be occurred in the
contrary case.
Safety warnings
• Do not connect your fridge freezer to the mains electricity supply using
an extension lead.
• Do not use damaged, torn or old plugs.
• Do not pull, bend or damage the cord.
• Do not use plug adapter.
• This appliance is designed for use by adults. Do not allow children to
play with the appliance or hang off the door.
• Never touch the power cord/plug with wet hands. This may cause a short
circuit or electric shock.

EN -8-
• Do not place glass bottles or cans in the ice-making compartment as
they will burst when the contents freeze.
• Do not place explosive or ammable material in your fridge. Place drinks
with high alcohol content vertically in the fridge compartment and make
sure their tops are tightly closed.
• When removing ice from the ice-making compartment, do not touch it. Ice may
cause frost burns and/or cuts.
• Do not touch frozen goods with wet hands. Do not eat ice-cream or ice cubes
immediately after they are removed from the ice-making compartment.
• Do not re-freeze thawed frozen food. This may cause health issues such as food
poisoning.
Installing and operating your fridge freezer
Before using your fridge freezer for the rst time, please pay attention to the
following points:
• The operating voltage for your fridge freezer is 220-240 V at 50Hz.
• The plug must be accessible after installation.
• Your fridge freezer may have an odour when it is operated for the rst time. This is normal
and the odour will fade when your fridge freezer starts to cool.
• Before connecting your fridge freezer, ensure that the information on the data plate
(voltage and connected load) matches that of the mains electricity supply. If in doubt,
consult a qualied electrician.
• Insert the plug into a socket with an efcient ground connection. If the socket has no
ground contact or the plug does not match, we recommend you consult a qualied
electrician for assistance.
• The appliance must be connected with a properly installed fused socket. The power
supply (AC) and voltage at the operating point must match with the details on the name
plate of the appliance (the name plate is located on the inside left of the appliance).
• We do not accept responsibility for any damages that occur due to ungrounded usage.
• Place your fridge freezer where it will not be exposed to direct sunlight.
• Your fridge freezer must never be used outdoors or exposed to rain.
• Your appliance must be at least 50 cm away from stoves, gas ovens and heater cores,
and at least 5 cm away from electrical ovens.
• If your fridge freezer is placed next to a deep freezer, there must be at least 2 cm between
them to prevent humidity forming on the outer surface.
• Do not cover the body or top of fridge freezer with lace. This will affect the
performance of your fridge freezer.
• Clearance of at least 150 mm is required at the top of your appliance. Do
not place anything on top of your appliance.
• Do not place heavy items on the appliance.
• Use the adjustable front legs to make sure your appliance is level and stable.
You can adjust the legs by turning them in either direction. This must be done before
placing food in the appliance.
• Clean the appliance thoroughly before use (see Cleaning and Maintenance).

EN -9-
• Before using your fridge freezer, wipe all parts with a solution of warm water and a
teaspoon of sodium bicarbonate. Then, rinse with clean water and dry. Return all parts
to the fridge freezer after cleaning.
• Install the two plastic distance guides (the parts on the black vanes
-condenser- at the rear) by turning it 90° (as shown in the gure) to
prevent the condenser from touching the wall.
• The distance between the appliance and back wall must be a maximum
of 75 mm.
Before Using your Fridge Freezer
• When using your fridge freezer for the rst time, or after transportation, keep
it in an upright position for at least 3 hours before plugging into the mains.
This allows efcient operation and prevents damage to the compressor.
• Your fridge freezer may have a smell when it is operated for the rst time. This is normal
and the smell will fade away when your fridge freezer starts to cool.
General features
• Can be installed as built-in or freestanding
• 304 grade high hygienic stainless steel construction
• Dual refrigeration system with two compressors and three evaporators
• Sophisticated data logging system
• Dot matrix multi information display
• Luminated touch sensitive controls
• Heat insulated triple low-e glass window
• Ambient humidity sensor for adjusting best energy performance
• LED lighting with magnetic door sensor
• Shelf holder with LED lighting
• Corono light function
• Fresh bin compartment to keep vegetables fresh longer
• Storage drawers allow easy access to food with removable divider
• Automatic ice maker with advanced water ltration system
• Each zone can be turned off independently
• Shelf with built-in oven tray compatibility
• Sabbath mode
Installation your fridge freezer
It is important that the installation of fridge freezer is done by a qualied installer. Otherwise,
your product will be out of warranty.
This manual is prepared for an easier, problem free and most importantly safe installation
process. Before beginning installation, it is strongly
recommended to read this installation guide carefully and entirely.
Any problems or questions you might have about the installation process, please contact
customer service or your authorized dealer.

EN -10-
Important product informations , such as model and serial number of the unit are listed in
product identity plate. Product identity plate is located on the left wall of the top cooler drawer
compartment. To access it please open the top cooler drawer and remove the basket. See
the illustration below.
YOUR FRIDGE FREEZER
PART - 2.
1. Engine compartment
2. Dot martix multi information display
3. Luminated touch sesitive controls
4. Freezer with glass shelves
5. Refrigerator with glass shelves
6. Crisper drawer with fresh control compartment
7. Freezer drawer
8. Ice compartment with ice cube tray
9. Heat insulated triple low-e glass window
10. Detachable trim
11. LED lighting with magnetic door sensor
12. Shelf holder with LED lighting
13. Bootle drawer
14. Robust handle
This presentation is only for
information about the parts of
the appliance. Parts may vary
according to the appliance model.

EN -11-
INSTALLATION YOUR FRIDGE FREEZERPART - 3.
It is important that the installation of your fridge freezer is done by a qualied installer.
Otherwise, your product will be out of warranty.
This manual is prepared for an easier, problem free and most importantly safe installation
process. Before beginning installation, it is strongly recommended to read this installation
guide carefully and entirely.
Any problems or questions you might have about the installation process, please contact
customer service or your authorized dealer.
Important product informations , such as model and serial number of the unit are listed in
product identity plate. Product identity plate is located on the left wall of the top cooler drawer
compartment. To access it please open the top cooler drawer and remove the basket. See
the illustration below.
location of rating plate (open drawer)
Before starting installation
Your fridge freezer could be installed as two different types. As Built-in or Freestanding.
Some parts are optional according to installation type.
Before the installation process of your fridge freezer, please make sure that the prerequisites
are provided. Such as; electrical connections, water supply and etc. Please check the techni-
cal specications on the following pages.
Tools & Materils
• Dolly or an appropriate lift (Able To Support 400 Kg)
• 13 mm Socket Wrench and Open End Wrench
• Phillips Head Screwdriver
• M4 Allen Wrench
• Flat Head Screwdriver

EN -12-
• Drill with 6 mm concrete drill bit (for freestanding installations)
• Tubing Cutter
• Loctite® 270 (included in package)
Prerequisites for installation
Opening dimensions
Standard and ush built-in installations
Opening dimensions Standard Flush
Opening width 1200 1216
Opening heigth 2120 2136
Opening depth 580 600
* Units are in millimeters
Opening
depth
Opening width
Opening HEİGHT
1000
mm
1/4'
PEX
Tubing
Water line

EN -13-
Overall dimensions
1214
1072684
2129
55
92
655
598
716,5
358
252
497,5
Specication
Shipping weight
350 Kg.

EN -14-
Electrical requirements
The power outlet must be inside the area shown in the picture below for your fridge freezer.
When installing plug, you should be follow the National Electrical code and local codes and
regulations.
Caution: To ensure that the outlet is properly wired. Polarity should be checked by a qualied
electrician. Make sure the outlet is properly grounded.
Warning: Do not use an extension ex or plug.
Warning: In any installation, service or maintenance please turn off the power from the mains.
Front wiew 50
160
130
1910
Floor
Electrical Requirements
Power supply 220-240 V AC, 50 Hz
Receptable 2-prong grounding-type

EN -15-
Plumbing requirements
Your fridge freezer is able to produce ice via automatic ice maker system with an integrated
water ltration system. To supply water to the ice maker, the water line must be arranged
in the shown area before installation. A constant water pressure from 240000 Pa (35 psi)
up to 830000 Pa (120 psi) is sufcient for ice maker system. The water ltration system is
described on page 32.
Important note: The system should not be used with water that is microbiologically unsafe
or unknown water quality.
The instructions for appliances connected to the water mains shall state
• the maximum inlet water pressure, in pascals;
• the minimum inlet water pressure, in pascals, if this is necessary for the correct opera-
tion of the appliance.
The instructions for appliances connected to the water mains by detachable hose-sets shall
state that the new hose-sets supplied with the appliance are to be used and that old hose-
sets should not be reused.
Floor
350
150
90
Front wiew
Plumbing requirement
Water supply line 1/4'' PEX tubing
Water pressure 2.4-8.3 bar(35-120 psi)
Excess water line for connection 1000 mm

EN -16-
Unpack the unit
Check whether there is any damage on the product packaging. Open the packaging carton
using a utility knife from the cutting section which is indicated on the carton. Pay attention that
there is a kickplate taped at the back and the handle group is located right side of the unit.
Remove and discard “L” type brackets from pallet and then the unit
take down the refrigerator to oor with applying force only sides of it.
Important note: Please do not use the middle bottom part of the refrigerator for carrying.
Important note: It is strongly suggested that the refrigerator should be laid to its left side
(freezer side) while carrying.
If for any reason the unit has been laid on other than the left side, the unit must stand upright
for a minimum of 24 hours before connecting to power.
Due to the refrigerator being hefty a caution should be taken to sure that the unit is moved
and placed with adequate human power.
Position the unit
Please make sure all electrical and plumbing requirements are done, before placing the unit.
Caution: Do not tilt the refrigerator in any direction. This action can cause malfunction.
Your fridge freezer has own rollers, so it can be moved easier than moving on pallet.
Important note: Make sure the rear levellers are in their lowest position while settling the
refrigerator to its place. Levelling should not be completed until the unit is in desired position.
Levelling the unit
After positioning has been done, levelling should be done for proper placing. When the unit
is properly levelled, door and drawer adjustments are less likely to be changed from the fac-
tory default settings.
Firstly rear adjustment should be done with using a 13 mm socket wrench. Turn the bolt
clockwise to raise the unit or counter clockwise to lower it. Refer to the picture below for the
position of the rear roller base adjustment.
Important note: The oor can be reference for levelling, and not surrounding cabinetry. This
could have inuence the operation of the unit, such as door closing or drawer closing.
The front levelling legs could be adjusted by turning them counter clockwise
Rear adjustment
Front levelling feet
Warning: To avoid of the unit
tipping forward, the front level-
ling legs should touch the oor.

EN -17-
Anti-tip bracket installation
For safety precautions it is important to x the system to the surrounding for to prevent turn over.
There are two different methods which can be applied for freestanding type and built-in type.
The content of xating elements in the anti-tip package includes for two types of installation.
Content of Anti-tip package;
Fixing Pin - 4 pieces
2mm String - 8 pieces
Lag Screw (D4X20) - 4 pieces
L type Bracket - 2 pieces
Screw (M5X16) - 2 pieces
Plastic Wall Plug - 4 pieces
Lag Screw (D4X35) - 4 pieces
All components will not be necessary for each installation.
Warning: Carefully read the instructions below for safety.
In freestanding installation;
L type brackets and joints are used in this standing type. The sequence of assembly and
installation drawing are located below.
• Place the refrigerator in appropriate position.
• The unit should be pushed until the back side touches the wall.
• L type brackets and the rivet nuts are fastened with and M5 screw which are located
on the top of the refrigerator.
• Mark the wall through the holes of L type bracket and move the bracket.
• Make an hole on the wall at appropriate points with 6 mm drill and put the pegs in the wall.
• Fasten the L type bracket and wall with D4X35 Lag Screws.
Detail A
Cover
lag
screw
Peg M5 countersung
screw

EN -18-
In built-in installation;
Fixing pin and the joints are used in Built-in version. The sequence of the assembly and
installation drawing are located below.
• Place the refrigerator in furniture which is built in special dimensions. The dimensions
can be found in page 9.
• Open the upper compartment cover.
• Put the xed pins in appropriate holes and use the washers for tolerating gaps.
• Fasten the xing pins to the furniture with using D4X20 Screws
Detail A
Fixing pin
Lag screw
Detail B
Lag screw
Fixing
pin
Important note: Be sure the levelling is correct done before screwing.
Built-in Installation
Water line connection
¼ ‘’ mm plastic tubing is connected to the ice maker with a preassembled
¼ ‘’ check valve connection at the end of the tube. Check valve is located behind the kick plate.
First, PEX tubing must be cut evenly with using tubing cutter for proper even cut to ensure
that to eliminate any leakages. Next, safety clips should be removed from the open end of
the check valve. Then the tubing must be inserted rmly to the check valve. Finally safety
clips should be inserted onto the check valve again.
To prevent leaks, all connections should be checked.
Important note: Before making any connection please make sure the water tubing is clean
with using some water to remove debris which may be present in the tube.
Important note: Water ltration system can be bypassed by removing the lter (see page
32); in case reverse osmosis system or any in-house ltration is used. Filter housing has an
automated bypass system.

EN -19-
Installing kickplate
Before the installing the kickplate, make sure to put the drain pan back to its original position.
The slots on the kickplate should be aligned with the poles. Push the kickplate rmly to the
poles until hearing a “click” sound or until the surface of the kickplate and the main frame are
aligned. Please see the illustration below.
The clips must be placed one by one for an easier and convenient installation. An excessive
force can damage the kickplate.
Important note: The kickplate must be removable for service. Take caution accordingly.

EN -20-
Door handle installation
The door handle pins must be screwed tightly with a drop of Loctite® 270 on the tooth of the
pins. The door handles should be placed and tightened with setscrews on them. This process
should be done for both the doors and drawer handles. While processing, be careful not to
hit the surface of the refrigerator. Scratch or dent may happen.
The doors of your fridge freezer models open up to an angle of 120.
Warning: The surface which has setscrew holes for drawer handle must face down.
Door handle
pin Set screw