Whittier Wood Furniture 1356AFGAC McKenzie User manual

P.O. Box 2827
Eugene, OR 97402 USA
Outside U.S. or Canada: 541- 687- 0213Outside U.S. or Canada: 541- 687- 0213
800-653-3336800-653-3336
Fax: [phone] • Fax: [phone] • wwwwww.whittie.whittierrwood.comwood.com
Mail: P.O. Box 2827 • Eugene, Oregon 97402, U.S.AMail: P.O. Box 2827 • Eugene, Oregon 97402, U.S.A
Production Code:
VN 04/09
Service Policy: We will replace parts
which are defective, missing or damaged.
Please contact Whittier Wood Products
customer service department directly (by
phone, fax, mail or E-mail) for replacement
parts.
Hours: Our friendly customer service staff
can be reached Monday-Friday 7:00 a.m. to
5:00 p.m. (Pacific Time). A message can be
left 24 hours a day, 7 days a week.
To Order: Provide the complete furniture
model number, part letter, production code,
quantity needed, reason for replacement
and your full name and address along with
a telephone number in case we need to
contact you.
Parts ship from our Eugene, Oregon factory
within 1 or 2 business days from the time
we receive the request. Please allow 5-10
business days for delivery.
Completely read the Assembly Instructions before
beginning your project.
Store the item: 1) in the box; 2) in a dry place; 3)
temperatures ranging from 40° to 90°. (Not on a cold,
possibly damp, cement floor.)
Inspect your furniture periodically for any loose glue
joints, screws or any other problem that might affect
the stability of your furniture. Tighten or repair
as needed.
Model #
AFGAC McKenzie
Headboard
1356AFGAC McKenzie Twin
Headboard
1357AFGAC McKenzie
Full/Queen Headboard
1358AFGAC McKenzie King/
Cal-King Headboard
Assembly Instructions
1357AFGAC shown
For normal household use only.
recommended for commercial use.
Congratulations!
This fine piece of furniture will make a handsome
addition to your home. For the best results, start
by reading the Assembly Instructions before you
begin your project.
Before loading or moving this unit, check all
screws and supports for tightness.
DESIGN SUBJECT TO CHANGE WITHOUT NOTICE.

1356AFGAC McKenzie Twin Headboard
1357AFGAC McKenzie Full/Queen Headboard
1358AFGAC McKenzie King/Cal-King Headboard — Parts List
A — Headboard Assembly
— Qty.1
1357AFGAC shown in above drawings.
B — Block (attached)
— Qty. 2
(N/A for 1356AUF)
C — #12 x 2½" Screw
(inserted) — Qty. 8
Page 2 — 1356AFGAC - 1358AFGAC — 04/09
D — #12 x 1¼" Pan Head Screw
— Qty. 6
E — Washer
— Qty. 6
Before beginning assembly, identify the parts and make sure quantities received match what’s on this list.
If you need to replace a part, please refer to following list for its name and letter.
ASSEMBLY INSTRUCTIONS
TOOLS REQUIRED: Drill, 1/8" bit, Phillips screwdriver
1.
IF YOU ARE USING A HOLLYWOOD BED FRAME:
Adjust the Hollywood frame to fit your matress and box spring.
2. Place the Headboard (A) against the end brackets of the frame and mark locations for
the screws. Drill pilot holes approximately 1¼" deep. (To make sure you don’t drill deeper,
measure 1¼" up from the end of the drill bit and wrap a piece of tape around the bit. Stop drilling
when the edge of the tape meets the wood.)
3. Position Headboard (A) against the frame and attach using #12 x 1¼" Pan Head Screws (D)
and Washers (E).