Whittier Wood Furniture McKenzie Office Chest 1123AFGAC User manual

P.O. Box 2827
Eugene, OR 97402 USA
Code:
VN 01/12
Production
Model #
1123AFGAC;
1123AFCAF
McKenzie Office Chest
AFGAC = Glazed Antique Cherry finish
AFCAF = Caffè finish
Assembly Instructions
Congratulations!
This fine piece of furniture will make a gorgeous addition to
your home. For the best results, read the Assembly
Instructions before you begin your project.
IMPORTANT NOTES:
•For normal household use only. Not recommended for
commercial use.
•Do not climb, sit or stand on this piece of furniture.
•Do not overload the drawers.
•Unload items before you move this unit.
•Before you load or move this unit, tighten all screws and
supports.
•Before you begin your project, completely read the
Assembly Instructions and Finishing Hints.
•Store this item: 1- in its box; 2- in a dry place; 3- in
temperatures that range from 40°F to 90°F (not on a cold
and possibly damp cement floor).
•Periodically inspect your furniture for any loose glue
joints, screws or any other problem that might affect the
stability of your furniture. Tighten or repair as needed.
WARNING
Serious or fatal crushing injuries can occur from
furniture tip-over. To help prevent tip-over:
•Place heaviest items in the bottom drawers.
•Unless specifically designed to accommodate, do not
set TVs or other heavy objects on top of this product.
•Never allow children to climb or hang on drawers, doors
or shelves.
•Never open more than one drawer at a time.
Use of tip-over restraints may only reduce but not
eliminate the risk of tip-over.
DESIGN SUBJECT TO CHANGE WITHOUT NOTICE.
CALL US FIRST! Do not return this item to the store
Service Policy: We will replace any part that is defective,
missing or damaged during assembly. For a replacement
part, directly contact Whittier Wood Products customer
service department by phone, fax, mail or email.
Hours: Our friendly customer service staff can be reached
Monday-Friday 7:00 a.m. to 5:00 p.m. (Pacific Time). You
may leave a message 24 hours a day, seven days a week.
To Order: Provide the finish and furniture model number
(upper portion of this page), the part letter, production
code, quantity needed, reason for replacement and your
full name, address and telephone number.
Parts ship from our Eugene, Oregon factory within one or
two business days from the time we receive your request.
Please allow five to ten business days for delivery.
800-653-3336 • Outside the U.S. or Canada: 541-687-0213 • Fax: [phone]
www.whittierwood.com • P.O. Box 2827 • Eugene, Oregon 97402, U.S.A.

1123AFGAC; 1123AFCAF McKenzie Office Chest
Parts List
Please identify the parts and check that quantities received match those on this list.
If you need to replace a part, refer to the following letter and part name.
Part Description Quantity
A Top Assembly 1
B Case 1
C Hutch Drawer (inserted) 2
D Small Drawer Box (inserted) 1
E Large Drawer Box (inserted) 1
F Small Drawer Face (installed) 1
G
Large Drawer Face (installed) 1
H Adjustable Shelf (attached) 1
I
Door (attached) 1
J Insert Nut (inserted) 4
K Small Adjustable Glide (installed) 4
L Large Knob (attached) 4
M #8 x 1-1/2" Machine Screw (installed) 4
N Small Knob (attached) 3
O 4x32mm Machine Screw (installed) 3
P Drawer Slides (pre-installed sets) 2
Q #6 x 1/2" Philtruss Screw (inserted) 12
R #6 x 3/4" Philtruss Screw (inserted) 12
S Hinge (attached) 2
T
#6 x 5/8" Flat Head Screw (inserted)
12 (AFGAC)
0 (AFCAF)
U Magnetic Catch Kit (attached) 2 sets
V #6 x 5/8" Philtruss Screw (inserted) 4
W #6 x 5/8" Undercut Screw (inserted)
12 (AFGAC)
24 (AFCAF)
1123AFGAC_1123AFCAF — Page 2 — 01/12

1123AFGAC; 1123AFCAF McKenzie Office Chest
Parts List
Part Description Quantity
X Door Stay (attached) 2
Y Shelf Bracket (attached) 4
ZA #6 x 1/2" Undercut Screw (inserted) 4
ZB #8 x 7/8" Lo-Profile Screw (inserted) 12
ZC #8 x 1-1/4" Pan Head Screw (inserted) 12
ZD #8 x 20mm Pan Head Screw (inserted) 4
ZE #8 x 1-1/4" Black Screw (inserted) 6
TR Furniture Tipping Restraint 2 sets
1123AFGAC_1123AFCAF — Page 3 — 01/12

1123AFGAC; 1123AFCAF McKenzie Office Chest
Assembly Instructions
Tool Required: Phillips Screwdriver
1. Place the chest at its final destination. Rotate the Small Adjustable Glides (K) on the bottoms of
the legs until the unit is level. See Figure 1.
K
K
Fig. 1
2. To move the Adjustable Shelf (H), remove the #6 x 1/2" Undercut Screws (ZA) and the Shelf
(H). Reposition the Shelf Brackets (Y) to the desired positions, replace the shelf and insert the
screws. See Figures 2 and 2a.
Fig. 2 H
ZA
Y
Fig. 2a
1123AFGAC_1123AFCAF — Page 4 — 01/12

1123AFGAC; 1123AFCAF McKenzie Office Chest
Assembly Instructions
3. Open the Door (I). To adjust the brake tension on the Door Stay (X), turn the screw on the Door
Stay (X) clockwise to loosen or counterclockwise to tighten. See Figures 3, 3a and 3b.
Fig. 3b
Fig. 3a
Fig. 3
L
o
o
s
e
n
T
i
g
h
t e
n
I
X
X
Continued on Page 6.
1123AFGAC_1123AFCAF — Page 5 — 01/12

1123AFGAC; 1123AFCAF McKenzie Office Chest
Assembly Instructions
4. Tipping restraint: Locate two studs in the wall behind the unit. Attach a Clip (T1) to one wall
stud with two #8 x 2" Black Screws (T3). See Figure 4a. Attach a second clip to the unit with two
#8 x 1" Pan Head Screws (T4). See Figure 4b. Connect the two clips with the Nylon Restraint
Strap (T2). Pull the Nylon Restraint Strap (T2) tight so there is no slack. See Figures 4c and 4d.
Repeat this procedure to attach the second tipping restraint. If you cannot locate two studs,
purchase the proper wall attachment hardware for your type of wall and secure the unit.
Fig. 4a
T1
T
3
Pull tight
Fig. 4d
T1
T
2
T
3
T
4
Fig. 4c
Pull the Nylon Restraint
Strap (T2) tight
so there is no slack.
T
4
T
1
Fig. 4b
1123AFGAC_1123AFCAF — Page 6 — 01/12