Whittier Wood Furniture Bryce Slim Wall Mirror User manual

P.O. Box 2827
Eugene, OR 97402 USA
Production Code:
VN 02/20
Model #
1508RLNa
Bryce Slim Wall Mirror
RLN = Ridgeline finish
Assembly Instructions
IMPORTANT NOTES:
•Wood can be susceptible to changing color over time when exposed to
strong sunlight. Use window shades, drapes or blinds to protect your
furniture. To help the surface age evenly and avoid dark and light
spots, periodically move items to expose the entire surface to an even
amount of light so it may develop a uniform patina.
•For normal household use only. Not recommended for commercial use.
•Handle the mirror with care. Glass is fragile.
•Before you begin your project, completely read the Assembly
Instructions.
WARNING
Drilling, sawing, sanding or machining wood products can expose you to
wood dust, a substance known to the state of California to cause cancer.
Avoid inhaling wood dust or use a dust mask or other safeguards for
personal protection.
For more information go to: www.p65warnings.ca.gov/wood
This product can expose you to chemicals,
including formaldehyde,
which are known to the State of California to cause cancer.
For more information go to: www.p65warnings.ca.gov/furniture
DESIGN SUBJECT TO CHANGE WITHOUT NOTICE.
CUSTOMER SERVICE
If you ever have questions about your furniture, please do not hesitate to contact us. In the unlikely event you need a
replacement part; we can make those parts available through an authorized Whittier Wood Furniture dealer. If you
cannot order replacement parts through your dealer, please contact our customer service department.
Hours: Our friendly customer service staff can be reached:
Monday-Friday 8:00 a.m. to 5:00 p.m. (Pacific Time).
You may leave a message 24 hours a day, seven days a week.
Customer Service: 800-653-3336 • Outside the U.S.: 541-687-0213
Fax: [phone]• Email: [email protected]
Thank you for allowing us to help you furnish your
home. We are certain you will be delighted with
your new furniture for many years to come.

1508RLNa Bryce Slim Wall Mirror
Parts List
1508RLNa — Page 2 — 02/20
Please identify the parts and check that quantities received match those on this list.
If you need to replace a part, refer to the following letter and part name.
Part
Description
Quantity
Aa
Mirror Assembly
1
Ba
Mirror Frame
1
C
Mirror (attached)
1
D
Short Mirror Retainer (attached)
2
E
Long Mirror Retainer (attached)
2
F
#6 x 3/4" Brass Flat Head Screw (inserted)
4
G
#6 x 5/8" Philtruss Screw (inserted)
12
H
#8 x 1-3/4" Pan Head Screw
2
I
Mirror Frame Bracket (attached)
1
J
Mirror Wall Bracket
1

1508RLNa Bryce Slim Wall Mirror
Assembly Instructions
1508RLNa — Page 3 — 02/20
Tools Required: Phillips Screwdriver, Tape Measure, Pencil
1. Decide if you want your Mirror to hang either vertically or horizontally. If you want it to hang
horizontally, remove the Mirror Frame Bracket (I) and line it up to the predrilled holes on the long
side of the Mirror Frame (Ba) as in Figure 1. Attach with four #6 x 3/4" Flat Head Screws (F).
2. Determine where you want the bottom of your mirror to end and draw a faint pencil line on the
wall. For a vertical placement, use a tape measure and measure up 41-5/8" from that mark.
Draw a faint line. For a horizontal placement, measure up 23-1/8". Draw a faint line. The top line
is where you attach the Mirror Wall Bracket (J). If you like, you can erase the faint bottom pencil
mark. See Figures 2 and 2a.
Vertical Wall Mount
Wall
Horizontal Wall Mount
Fig. 2
Fig. 2a
Wall
23-1/8"
41-5/8"
Fig. 1
Ba
I
F
x 4

1508RLNa Bryce Slim Wall Mirror
Assembly Instructions
1508RLNa — Page 4 — 02/20
3. Locate two studs in the wall behind the space where you want to hang your Mirror. Affix the
Mirror Wall Bracket (J) into the studs with two #8 x 1-3/4" Pan Head Screws (H). If you cannot
locate two studs, purchase the proper wall attachment hardware for your type of wall and secure
the bracket. See Figure 3.
4. NOTE: The Mirror Wall Bracket (J) angles out at the top. When you hang your Mirror, the Mirror
Frame Bracket (I) fits over the angled part of the Mirror Wall Bracket (J). See Figure 4.
Mirror Wall
Brackets (J)
(back view)
Wall
Stud
Mirror Wall
Bracket (J)
(side view)
Wall
Fig. 4
Mirror Frame
Bracket (I)
(back view)
Fig. 3
Wall
J
H
J
H
x 1
x 2