Whittier Wood Furniture McKenzie 1183AFGAC User manual

P.O. Box 2827
Eugene, OR 97402 USA
Production Code:
VN 09/12
Model #
1183AFGAC;
1183AFCAF
75"W McKenzie
Master Dresser
AFGAC = Glazed Antique Cherry finish
AFCAF = Caffè finish
Assembly Instructions
Congratulations!
This fine piece of furniture will make a gorgeous addition to
your home. For the best results, read the Assembly
Instructions before you begin your project.
IMPORTANT NOTES:
•For normal household use only. Not recommended to
use this product in a commercial setting.
•Do not climb, sit or stand on or in this piece of furniture.
•Do not overload the drawers.
•Unload items before you move this unit.
•Before you load or move this unit, tighten all screws
and supports.
•Before you begin your project, completely read the
Assembly Instructions.
•Store this item: 1- in its box; 2- in a dry place; 3- in
temperatures that range from 40°F to 90°F (not on a cold
and possibly damp cement floor).
•Periodically inspect your furniture for any loose glue
joints, screws or any other problem that might affect the
stability of your furniture. Tighten or repair as needed.
WARNING
Serious or fatal crushing injuries can occur from
furniture tip-over. To help prevent tip-over:
•Place heaviest items in the bottom drawers.
•Unless specifically designed to accommodate, do not
set TVs or other heavy objects on top of this product.
•Never allow children to climb or hang on drawers, doors
or shelves.
•Never open more than one drawer at a time.
Use of tip-over restraints may only reduce but not
eliminate the risk of tip-over.
DESIGN SUBJECT TO CHANGE WITHOUT NOTICE.
CALL US FIRST! Do not return this item to the store
Service Policy: We will replace any part that is defective,
missing or damaged during assembly. For a replacement
part, directly contact Whittier Wood Products customer
service department by phone, fax, mail or email.
Hours: Our friendly customer service staff can be reached
Monday-Friday 7:00 a.m. to 5:00 p.m. (Pacific Time). You
may leave a message 24 hours a day, seven days a week.
To Order: Provide the finish and furniture model number
(upper portion of this page), the part letter, production
code, quantity needed, reason for replacement and your
full name, address and telephone number.
Parts ship from our Eugene, Oregon factory within one or
two business days from the time we receive your request.
Please allow five to ten business days for delivery.
800-653-3336 • Outside the U.S. or Canada: 541-687-0213 • Fax: [phone]
www.whittierwood.com • P.O. Box 2827 • Eugene, Oregon 97402, U.S.A.

1183AFGAC; 1183AFCAF 75"W McKenzie Master Dresser
Parts List
1183AFGAC_1183AFCAF — Page 2 — 09/12
Please identify the parts and check that quantities received match those on this list.
If you need to replace a part, refer to the following letter(s) and part name.
Part Description Quantity
A Top Assembly (attached) 1
B Case 1
C Lower Small Drawer Box (inserted) 1
D Upper Small Drawer Box (inserted) 1
E Upper Medium Drawer Box (inserted) 2
F Lower Medium Drawer Box (inserted) 2
G Large Drawer Box (inserted) 4
H Lower Small Drawer Face (installed) 1
I Upper Small Drawer Face (installed) 1
J Upper Medium Drawer Face (installed) 2
K Lower Medium Drawer Face (installed) 2
L Large Drawer Face (installed) 4
M Small Tray (inserted) 1
N Large Tray (inserted) 1
O Assembled Foot (attached) 2
P M4 x 10mm Insert Nut (inserted) 8
Q 1/4" x 20mm Insert Nut (inserted) 6
R Adjustable Glide (installed) 6
S Knob (attached) 14
T #8 x 1-1/2" Machine Screw (installed) 14
U Drawer Slides (pre-installed sets) 10

1183AFGAC; 1183AFCAF 75"W McKenzie Master Dresser
Parts List
1183AFGAC_1183AFCAF — Page 3 — 09/12
Part Description Quantity
V #6 x 1/2" Philtruss Screw (inserted) 60
W #6 x 3/4" Philtruss Screw (inserted) 60
X Hinged Drawer Stop (attached) 1
ZA #6 x 5/8" Undercut Screw (inserted) 2
ZB Hex Bumper (attached) 1
ZC #8 x 7/8" Lo-Profile Screw (inserted) 80
ZD #8 x 1-1/8" Lo-Profile Screw (inserted) 8
ZE #8 x 1-3/8" Lo-Profile Screw (inserted) 9
ZF #8 x 1-1/4" Pan Head Screw (inserted) 23
ZG #8 x 2" Black Screw (inserted) 4
ZH Pad Strip (attached) 1
ZI Small Velvet (attached) 1
ZJ Medium Velvet (attached) 1
ZK Large Velvet (attached) 1
TR Furniture Tipping Restraint 2 sets

1183AFGAC; 1183AFCAF 75"W McKenzie Master Dresser
Assembly Instructions
1183AFGAC_1183AFCAF — Page 4 — 09/12
Tool Required: Phillips Screwdriver
1. Open the Upper Small Drawer (D) and remove the foam packaging that contains the Small Tray
(M) and Large Tray (N). Recycle the packaging and return the Trays (M) & (N) to the drawer.
See Figure 1 and 1a.
2. There is a secret storage area in the Upper Small drawer (D). To access this storage, open both
Small Drawers (D & E) reach between the two drawer boxes from the right side and behind the
frame of the dresser case until you find the Hinged Drawer Stop (X) that is attached to the
bottom right side of the Upper Small Drawer (D). Pull the Hinged Drawer Stop forward and then
pull the Upper Small Drawer (D) out far enough so you can access the concealed storage
space. To close the drawer, just push it shut. See Figure 2.
Fig. 1
Fig. 1a
N
D
Fig. 1b
M
Fig. 2
X
D
D
E

1183AFGAC; 1183AFCAF 75"W McKenzie Master Dresser
Assembly Instructions
1183AFGAC_1183AFCAF — Page 5 — 09/12
3. Place the dresser at its final destination. Rotate the Adjustable Glides (R) on the bottoms of the
legs and Assembled Feet (O) until the unit is level. See Figure 3.
4. Tipping restraint: Locate two studs in the wall behind the unit. Attach a Clip (T1) to one wall
stud with two #8 x 2" Black Screws (T3). See Figure 4a. Attach a second clip to the unit with two
#8 x 1" Pan Head Screws (T4). See Figure 4b. Connect the two clips with the Nylon Restraint
Strap (T2). Pull the Nylon Restraint Strap (T2) tight so there is no slack. See Figures 4c and 4d.
Repeat this procedure to attach the second tipping restraint. If you cannot locate two studs,
purchase the proper wall attachment hardware for your type of wall and secure the unit.
Fig. 4a
T1
T
3
Pull tight
Fig. 4d
T1
T
2
T
3
T
4
Fig. 4c Pull the Nylon Restraint
Strap (T2) tight
so there is no slack.
T
4
T
1
Fig. 4b
Fig. 3
R R R
O