Whittier Wood Furniture McKenzie AFGAC Series User manual

P.O. Box 2827
Eugene, OR 97402 USA
Production Code:
VN 05/12
McKenzie Chest
AFGAC = Glazed Antique Cherry finish
AFCAF = Caffè finish
Assembly Instructions
Model #
Congratulations!
This fine piece of furniture will make a gorgeous addition to
your home. For the best results, read the Assembly
Instructions before you begin your project.
IMPORTANT NOTES:
•For normal household use only. Not recommended for
commercial use.
•Do not climb, sit or stand on this piece of furniture.
•Do not overload the drawers.
•Unload items before you move this unit.
•Before you load or move this unit, tighten all screws and
supports.
•Before you begin your project, completely read the
Assembly Instructions.
•Store this item: 1- in its box; 2- in a dry place; 3- in
temperatures that range from 40°F to 90°F (not on a cold
and possibly damp cement floor).
•Periodically inspect your furniture for any loose glue
joints, screws or any other problem that might affect the
stability of your furniture. Tighten or repair as needed.
WARNING
Serious or fatal crushing injuries can occur from
furniture tip-over. To help prevent tip-over:
•Place heaviest items in the bottom drawers.
•Unless specifically designed to accommodate, do not
set TVs or other heavy objects on top of this product.
•Never allow children to climb or hang on drawers, doors
or shelves.
•Never open more than one drawer at a time.
Use of tip-over restraints may only reduce but not
eliminate the risk of tip-over.
DESIGN SUBJECT TO CHANGE WITHOUT NOTICE.
CALL US FIRST! Do not return this item to the store
Service Policy: We will replace any part that is defective,
missing or damaged during assembly. For a replacement
part, directly contact Whittier Wood Products customer
service department by phone, fax, mail or email.
Hours: Our friendly customer service staff can be reached
Monday-Friday 7:00 a.m. to 5:00 p.m. (Pacific Time). You
may leave a message 24 hours a day, seven days a week.
To Order: Provide the finish and furniture model number
(upper portion of this page), the part letter, production
code, quantity needed, reason for replacement and your
full name, address and telephone number.
Parts ship from our Eugene, Oregon factory within one or
two business days from the time we receive your request.
Please allow five to ten business days for delivery.
800-653-3336 • Outside the U.S. or Canada: 541-687-0213 • Fax: [phone]
www.whittierwood.com • P.O. Box 2827 • Eugene, Oregon 97402, U.S.A.
1121AFGACa;
1121AFCAFa
5-Drawer McKenzie
Lin
g
erie Chest
1180AFGACa;
1180AFCAFa
6-Drawer
McKenzie
Chest
1181AFGACa;
1181AFCAFa
11-Drawer
McKenzie Chest
1126AFGACa;
1126AFCAFa
5-Drawer
McKenzie Chest

1121AFGACa; 1121AFCAFa & 1126AFGACa; 1126AFCAFa;
1180AFGACa; 1180AFCAFa & 1181AFGACa; 1181AFCAFa
McKenzie Chest
Parts List
1121AFGACa,1121AFCAFa,1126AFGACa,1126AFCAFa,1180AFGACa,1180AFCAFa,1181AFGACa,1181AFCAFa
Page 2 — 05/12
Please identify the parts and check that quantities received match those on this list.
If you need to replace a part, refer to the following letter and part name.
Quantity
Part Description 1121AFGACa
1121AFCAFa 1126AFGACa 1126AFCAFa 1180AFGACa 1180AFCAFa 1181AFGACa 1181AFCAFa
A Top Assembly (attached) 1 1 1 1
Ba Case 1 1 1 1
F Small Drawer Box (inserted) 3 2 2 3
G Medium Drawer Box (inserted) 0 2 2 4
H Large Drawer Box (inserted) 2 1 2 4
I Small Drawer Face (attached) 3 2 2 3
J Medium Drawer Face (attached) 0 2 2 4
K Large Drawer Face (attached) 2 1 2 4
L Knob (attached) 5 8 10 11
Q
#8 x 1-1/2" Machine
Screw (installed)
5 8 10 11
T
#8 x 7/8" Lo-Profile Screw
(inserted) 20 26 32 60
U
#8 x 1-1/4" Pan Head
Screw (inserted)
3 12 12 21
V
#8 x 1-3/16" Black Screw
(inserted) 0 0 0 6
W
#8 x 1-1/4" Black Screw
(inserted) 0 0 0 5
Y Small Adjustable Glide (installed) 4 4 4 5
Z
16" Drawer Slides
(pre-installed sets)
5 5 6 11
ZB
#6 x 1/2" Philtruss Screw
(inserted)
30 30 36 66
ZC
#6 x 3/4" Philtruss Screw
(inserted)
30 30 36 66

1121AFGACa; 1121AFCAFa & 1126AFGACa; 1126AFCAFa;
1180AFGACa; 1180AFCAFa & 1181AFGACa; 1181AFCAFa
McKenzie Chest
Parts List
1121AFGACa,1121AFCAFa,1126AFGACa,1126AFCAFa,1180AFGACa,1180AFCAFa,1181AFGACa,1181AFCAFa
Page 3 — 05/12
Quantity
Part Description 1121AFGACa
1121AFCAFa 1126AFGACa 1126AFCAFa 1180AFGACa 1180AFCAFa 1181AFGACa 1181AFCAFa
ZQ Foot Assembly (attached)
0 0 0 1
ZR Insert Nut (inserted) 4 4 4 5
ZS
#8 x 1-1/8" Lo-Profile
Screw
(inserted) 0 0 0 4
ZT
#8 x 2" Black Screw
(inserted) 0 0 0 2
ZU
#8 x 1-3/8" Lo-Profile
Screw
(inserted) 7 8 8 9
TR Furniture Tipping Restraint 1 set 2 sets 2 sets 2 sets

1121AFGACa; 1121AFCAFa & 1126AFGACa; 1126AFCAFa;
1180AFGACa; 1180AFCAFa & 1181AFGACa; 1181AFCAFa
Assembly Instructions
1121AFGACa,1121AFCAFa,1126AFGACa,1126AFCAFa,1180AFGACa,1180AFCAFa,1181AFGACa,1181AFCAFa
Page 4 — 05/12
Tool Required: Phillips Screwdriver
1. Position the unit at the desired location. Adjustable Glides (Y) are attached to the bottoms of the
feet. Rotate the glides until the unit stands level. See Figure 1.
2. Tipping restraint: Locate the stud(s) in the wall behind the unit. Attach a Clip (T1) to one wall
stud with two #8 x 2" Black Screws (T3). See Figure 2a. Attach a second clip to the unit with two
#8 x 1" Pan Head Screws (T4). See Figure 2b. Connect the two clips with the Nylon Restraint
Strap (T2). Pull the Nylon Restraint Strap (T2) tight so there is no slack. See Figures 2c and 2d.
Repeat this procedure to attach the second tipping restraint. If you cannot locate two studs,
purchase the proper wall attachment hardware for your type of wall and secure the unit.
Fig. 2a
T1
T
3
Pull tight
Fig. 2d
T1
T
2
T
3
T
4
Fig. 2c Pull the Nylon Restraint
Strap (T2) tight
so there is no slack.
T
4
T
1
Fig. 2b
(1181 shown)
Y
Fig. 1
Y
YZQ
(1181 shown)