Whittier Wood Furniture McKenzie 1505FST User manual

P.O. Box
2827
Eugene, OR 97402 USA
Production Code:
VN 09/17
Model #
1505FST
McKenzie Rectangular
Mirror
FST = Fieldstone finish
Assembly Instructions
IMPORTANT NOTES:
•For normal household use only. Not recommended for commercial use.
•Handle the mirror with care. Glass is fragile.
WARNING
Drilling, sawing, sanding or machining wood products can expose you to
wood dust, a substance known to the state of California to cause cancer.
Avoid inhaling wood dust or use a dust mask or other
safeguards for
personal protection.
For more information go to: www.p65warnings.ca.gov/wood
This product can expose you to chemicals, including formaldehyde,
which are known to the State of California to cause cancer.
For more information go to: www.p65warnings.ca.gov/furniture
DESIGN SUBJECT TO CHANGE WITHOUT NOTICE.
CUSTOMER SERVICE
If you ever have questions about your furniture, please do not hesitate to contact us. In the unlikely event you need a
replacement part; we can make those parts available through an authorized Whittier Wood Furniture dealer. If you
cannot order replacement parts through your dealer, please contact our customer service department.
Hours: Our friendly customer service staff can be reached:
Monday-Friday 8:00 a.m. to 5:00 p.m. (Pacific Time).
You may leave a message 24 hours a day, seven days a week.
Customer Service: 800-653-3336 • Outside the U.S.: 541-687-0213
Fax: [phone]• Email: [email protected]
Thank you for allowing us to help you furnish your
home. We are certain you will be delighted with
your new furniture for many years to come.

1505FST McKenzie Rectangular Mirror
Parts List
1505FST — Page 2 — 09/17
Please identify the parts and check that quantities received match those on this list.
If you need to replace a part, refer to the following letter and part name.
Part
Description
Quantity
A
Mirror Assembly
1
B
Mirror
1
C
Mirror Frame (attached)
1
D
Short Mirror Retainer (attached)
2
E
Long Mirror Retainer (attached)
2
F
Mirror Support
2
G
Mirror Wall Bracket
2
(1 attached)
H
#8 x 1-3/4" Pan Head Screw
2
I
#6 x 3/4" Flat Head Screw (inserted)
4
J
#6 x 5/8" Philtruss Screw (inserted)
16
K
M4 x 41 mm Machine Screw
4
L
#7 x 1-1/2" Black Pan Head Screw
4
M
Velvet Pad 50 x 50mm
3

1505FST McKenzie Rectangular Mirror
Assembly Instructions
1505FST — Page 3 — 09/17
Tools Required: Phillips Screwdriver, Tape Measure, Pencil
You have the option of attaching your Mirror to the wall or to selected McKenzie Dressers. To
attach your Mirror to the wall, follow steps 1 – 4. To attach the Mirror horizontally to a
compatible McKenzie Dresser, follow steps 5 – 9.
1. Decide if you want your Mirror to hang either vertically or horizontally. If you want it to hang
vertically, remove the Mirror Wall Bracket (G) and line it up to the predrilled holes on the short
side of the Mirror Frame (C) as in Figure 1. Attach with four #6 x 3/4" Flat Head Screws (I).
2. Determine where you want the bottom of your mirror to end and draw a faint pencil line on the
wall. For a vertical placement, use a tape measure and measure up 41-7/8" from that mark.
Draw a faint line. For a horizontal placement, measure up 34-7/8". Draw a faint line. The top line
is where you attach the Mirror Wall Bracket (G). If you like, you can erase the faint bottom pencil
mark. See Figures 2 and 2a.
Vertical Wall Mount
Wall
Horizontal Wall Mount
Fig. 2
Fig. 2a
Wall
41-7/8"
34-7/8"
Fig. 1
C
G
I
x 4

1505FST McKenzie Rectangular Mirror
Assembly Instructions
1505FST — Page 4 — 09/17
3. Locate two studs in the wall behind the space where you want to hang your Mirror. Affix the
Mirror Wall Bracket (G) into the studs with two #8 x 1-3/4" Pan Head Screws (H). If you cannot
locate two studs, purchase the proper wall attachment hardware for your type of wall and secure
the bracket. See Figure 3.
4. NOTE: The Mirror Wall Bracket (G) angles out at the top. When you hang your Mirror, the
bracket that is attached to the back of the Mirror fits over the angled part of the Mirror Wall
Bracket (G). See Figure 4.
Mirror Wall
Brackets (G)
(back view)
Wall
Stud
Mirror Wall
Bracket (G)
(side view)
Wall
Fig. 4
Mirror Wall
Bracket (G)
(back view)
Fig. 3
Wall
G
H
x 1
x 2
G
H

1505FST McKenzie Rectangular Mirror
Assembly Instructions
1505FST — Page 5 — 09/17
5. To attach the Mirror to a McKenzie Dresser, remove the Mirror Wall Bracket (G) that is attached
to the Mirror Frame (C) as shown in Figure 5. Keep these Mirror Wall Brackets (G) and the four
#6 x 3/4" Flat Head Screws (I) in the chance that in the future, you will want to mount the Mirror
to the wall.
6. To attach the Mirror horizontally to the Dresser, use the predrilled holes in the back as noted in
Figure 6.
Horizontal mount holes
1183 Dresser
Fig. 6
I
x 4
Fig. 5
C
G
I

1505FST McKenzie Rectangular Mirror
Assembly Instructions
1505FST — Page 6 — 09/17
7. Using the predrilled holes on the back of the Dresser as guides, attach the two Mirror Supports
(F) with four M4 x 41 Machine Screws (K). The upper screws will be inserted into the 3rd hole
from the top and the lower screws will be inserted into the 1st hole from the bottom of the Mirror
Supports. See Figures 7 and 7a.
8. Peel off the backings on the Velvet Pads (M) and apply them to the bottom of the Mirror
Assembly (A). See Figure 8.
M
Fig. 8
M
K
x 4
K
1183 Dresser
(Back view)
F
K
Fig. 7
Third hole from the top
Fig. 7a
K
First hole from the bottom

1505FST McKenzie Rectangular Mirror
Assembly Instructions
1505FST — Page 7 — 09/17
9. Place the Mirror on top of the Dresser and attach it to the Mirror Supports (F) with
four #7 x 1-1/2" Black Pan Head Screws (L). See Figure 9.
L
Fig. 9
L
L
L
L
x 4