Whittier Wood 1100FST User manual

P.O. Box 2827
Eugene, OR 97402 USA
Production Code:
VN 02/17
McKenzie Nightstands
FST = Fieldstone finish
Assembly Instructions
Model #
IMPORTANT NOTES:
•For normal household use only. Not recommended for commercial use.
•Do not climb, sit or stand on this piece of furniture.
•Do not overload the drawers.
•Unload items before you move this unit.
WARNING
Drilling, sawing, sanding or machining wood products can expose you to
wood dust, a substance known to the state of California to cause cancer.
Avoid inhaling wood dust or use a dust mask or other safeguards for
personal protection.
For more information go to: www.p65warnings.ca.gov/wood
This produc
t can expose you to chemicals, including formaldehyde,
which are known to the State of California to cause cancer.
For more information go to: www.p65warnings.ca.gov/furniture
DESIGN SUBJECT TO CHANGE WITHOUT NOTICE.
CUSTOMER SERVICE
If you ever have questions about your furniture, please do not hesitate to contact us. In the unlikely event you need a
replacement part; we can make those parts available through an authorized Whittier Wood Furniture dealer. If you
cannot order replacement parts through your dealer, please contact our customer service department.
Hours: Our friendly customer service staff can be reached:
Monday-Friday 8:00 a.m. to 5:00 p.m. (Pacific Time).
You may leave a message 24 hours a day, seven days a week.
Customer Service: 800-653-3336 • Outside the U.S.: 541-687-0213
Fax: [phone]• Email: [email protected]
1100FST
Small 3-Drawer
McKenzie
Nightstand
1101FST
3-Drawer McKenzie
Nightstand
Thank you for allowing us to help you furnish your
home. We are certain you will be delighted with
your new furniture for many years to come.

1100FST & 1101FST McKenzie Nightstands
Parts List
1100FST_1101FST — Page 2 — 02/17
Please identify the parts and check that quantities received match those on this list.
If you need to replace a part, refer to the following letter and part name.
Part
Description
Quantity
1100FST
1101FST
A
Top Assembly (attached)
1
1
Ba
Case
1
1
E
Small Drawer Face (attached)
3
0
F
Large Drawer Face (attached)
0
3
G
Small Drawer Box (inserted)
3
0
H
Large Drawer Box (inserted)
0
3
I
14" Drawer Slides (pre-installed sets)
3
0
J
16" Drawer Slides (pre-installed sets)
0
3
L
Knob (attached)
3
3
Qb
#8 x 1-1/2" Machine Screw Tuscan (installed)
3
3
S
Small Adjustable Glide (installed)
4
4
Tb
#8 x 7/8" Black Lo-Profile Screw (inserted)
12
12
U
#8 x 1-1/4" Pan Head Screw (inserted)
3
3
Y
#6 x 1/2" Philtruss Screw (inserted)
18
18
Z
#6 x 3/4" Philtruss Screw (inserted)
18
18
ZA
Insert Nut (inserted)
4
4
ZB
#8 x 1-3/8" Lo-Profile Screw (inserted)
7
7
1101 shown in the illustrations.
Assembly Instructions
1. Place the unit at its final destination. Rotate the Small Adjustable Glides (S) on the bottoms of
the legs until the unit is level. See Figure 1.
Fig. 1
S
S