Whittier Wood McKenzie 3497AFGACa User manual

P.O. Box 2827
Eugene, OR 97402 USA
Production Code:
VN 05/12
McKenzie Occasional Table
AFGAC = Glazed Antique Cherry finish
AFCAF = Caffè finish
Assembly Instructions
Model #
Congratulations!
This fine piece of furniture will make a gorgeous addition to
your home. For the best results, read the Assembly
Instructions before you begin your project.
IMPORTANT NOTES:
•For normal household use only. Not recommended for
commercial use.
•Unload items before you move this unit.
•Do not overload the shelves.
•Before you load or move this unit, tighten all screws and
supports.
•Before you begin your project, completely read the
Assembly Instructions.
•Store this item: 1- in its box; 2- in a dry place; 3- in
temperatures that range from 40°F to 90°F (not on a cold
and possibly damp cement floor).
•Periodically inspect your furniture for any loose glue
joints, screws or any other problem that might affect the
stability of your furniture. Tighten or repair as needed.
DESIGN SUBJECT TO CHANGE WITHOUT NOTICE.
CALL US FIRST! Do not return this item to the store
Service Policy: We will replace any part that is defective,
missing or damaged during assembly. For a replacement
part, directly contact Whittier Wood Products customer
service department by phone, fax, mail or email.
Hours: Our friendly customer service staff can be reached
Monday-Friday 7:00 a.m. to 5:00 p.m. (Pacific Time). You
may leave a message 24 hours a day, seven days a week.
To Order: Provide the finish and furniture model number
(upper portion of this page), the part letter, production
code, quantity needed, reason for replacement and your
full name, address and telephone number.
Parts ship from our Eugene, Oregon factory within one or
two business days from the time we receive your request.
Please allow five to ten business days for delivery.
800-653-3336 • Outside the U.S. or Canada: 541-687-0213 • Fax: [phone]
www.whittierwood.com • P.O. Box 2827 • Eugene, Oregon 97402, U.S.A.
3498AFGACa;
3498AFCAFa
McKenzie Side Table
3497AFGACa;
3497AFCAFa
McKenzie Accent Table

3497AFGACa; 3497AFCAFa McKenzie Accent Table;
3498AFGACa; 3498AFCAFa McKenzie Side Table
Parts List
3497AFGACa_3497AFCAFa_3498AFGACa_3498AFCAFa — Page 2 — 05/12
Please identify the parts and check that quantities received match those on this list.
If you need to replace a part, refer to the following letter and part name.
Part Description Quantity
Aa Top Assembly 1
B Leg 4
C Shelf Assembly 1
D #8 x 1-1/4" Pan Head Screw 30 (22 inserted)
E 5/16" Flat Washer 4
F 3/8" x 2-1/2" Hex Bolt 4
H 3/8" x 1" Insert Nut (inserted) 4
J Adjustable Glide (installed) 4
K Wood Dowel (inserted) 4
L 1/4" x 20mm Insert Nut (inserted) 4
M #8 x 1-3/8" Lo-Profile Screw (inserted) 4
N #8 Washer (inserted) 6
3497 shown in the illustrations.

3497AFGACa; 3497AFCAFa McKenzie Accent Table;
3498AFGACa; 3498AFCAFa McKenzie Side Table
Assembly Instructions
3497AFGACa_3497AFCAFa_3498AFGACa_3498AFCAFa — Page 3 — 05/12
Tools Required: Phillips Screwdriver, 9/16" or Adjustable Wrench
1. Turn the Top Assembly (Aa) upside-down on a clean, protected surface. Position the Legs (B) in
the corners so the Insert Nuts (H) face in. LOOSELY attach with four 5/16" Flat Washers (E) and
four 3/8" x 2-1/2" Hex Bolts (F) (the legs should be wobbly). See Figures 1 and 1a.
2. Turn the Shelf Assembly (C) upside-down and place the dowels into the dowel holes in the
Legs. Tighten the Hex Bolts on the Legs. See Figure 2.
Fig. 2
C
Fig. 1
E
F x 4 x 4
F
B
B
Fig. 1a
E
E
F
Aa

3497AFGACa; 3497AFCAFa McKenzie Accent Table;
3498AFGACa; 3498AFCAFa McKenzie Side Table
Assembly Instructions
3497AFGACa_3497AFCAFa_3498AFGACa_3498AFCAFa — Page 4 — 05/12
3. Using the pocket holes as guides, secure the Shelf (C) to the Legs (B) with eight #8 x 1-1/4"
Pan Head Screws (D). See Figures 3 and 3a.
4. Turn the table upright and place the table at its final destination. To level the table, rotate the
Adjustable Glides (J) found on the bottoms of the legs.
Fig. 3
D x 8
D D
Fig. 3a
Fig. 4
J J