Whittier Wood Stonewood 1746RGBb User manual

P.O. Box 2827
Eugene, OR 97402 USA
Production Code:
VN 03/17
Stonewood Beds
RGB = Rustic Glazed Brown finish
Assembly Instructions
Model #
IMPORTANT NOTES:
•For normal household use only. Not recommended for commercial use.
•Remove items before you move this unit.
•Do not overload the drawers.
•This assembly requires two people.
WARNING
Drilling, sawing, sanding or machining wood products can expose you to
wood dust, a substance known to the state of California to cause cancer.
Avoid inhaling wood dust or use a dust mask or other safeguards for
personal protection.
For more information go to: www.p65warnings.ca.gov/wood
This product can expose you to chemicals, including formaldehyde,
which are known to the State of California to cause cancer.
For more information go to: www.p65warnings.ca.gov/furniture
DESIGN SUBJECT TO CHANGE WITHOUT NOTICE.
CUSTOMER SERVICE
If you ever have questions about your furniture, please do not hesitate to contact us. In the unlikely event you need a
replacement part; we can make those parts available through an authorized Whittier Wood Furniture dealer. If you
cannot order replacement parts through your dealer, please contact our customer service department.
Hours: Our friendly customer service staff can be reached:
Monday-Friday 8:00 a.m. to 5:00 p.m. (Pacific Time).
You may leave a message 24 hours a day, seven days a week.
Customer Service: 800-653-3336 • Outside the U.S.: 541-687-0213
Fax: [phone]• Email: [email protected]
1716RGBb
Stonewood Queen
Storage Bed
1746RGBb
Stonewood Queen
Bed
1726RGBb
Stonewood King
Storage Bed
1749RGBb
Stonewood King
Bed
Thank you for allowing us to help you furnish your
home. We are certain you will be delighted with
your new furniture for many years to come.

1716RGBb Stonewood Queen Storage Bed
1726RGBb Stonewood King Storage Bed
1746RGBb Stonewood Queen Bed
1749RGBb Stonewood King Bed
Parts List
1716RGBb_1726RGBb_1746RGBb_1749RGBb
Page 2 — 03/17
Please identify the parts and check that the quantities received match those on this list. If you need
to replace a part, refer to the model number, part letter and name.
1719RGBb
Queen Headboard/Footboard Kit (x1)
Part
Description
Quantity
Ab
Headboard Assembly
1
Bb
Footboard Assembly
1
I
Queen Trestle with T-Nuts (24-3/8")
4
S
#8 x 1-5/8" Black Screw (inserted)
11
U
#8 x 1" Black Screw (inserted)
32
Y
1/4" T-Nut (inserted)
8
ZD
Left Bed Bracket (attached)
4
ZE
Right Bed Bracket (attached)
4
ZH
#6 x 5/8" Philtruss Screw (inserted)
20
ZI
#8 x 1-1/4" Pan Head Screw (inserted)
12
Please note this Assembly Instruction is for Stonewood Storage Beds (#1716 Queen and
#1726 King), and Stonewood Rail Beds (#1746 Queen and #1749 King.)The Parts Lists
for each component follow.

1716RGBb Stonewood Queen Storage Bed
1726RGBb Stonewood King Storage Bed
1746RGBb Stonewood Queen Bed
1749RGBb Stonewood King Bed
Parts List
1716RGBb_1726RGBb_1746RGBb_1749RGBb
Page 3 — 03/17
1728RGBb
King Headboard/Footboard Kit (x1)
Part
Description
Quantity
Ab
Headboard Assembly
1
Bb
Footboard Assembly
1
C
Center Deckboard
1
J
King Trestle with T-Nuts (40-1/2")
4
R
#8 x 1-1/4" Black Screw
12
S
#8 x 1-5/8" Black Screw (inserted)
11
U
#8 x 1" Black Screw (inserted)
32
Y
1/4" T-Nut (inserted)
8
ZD
Left Bed Bracket (attached)
4
ZE
Right Bed Bracket (attached)
4
ZH
#6 x 5/8" Philtruss Screw (inserted)
24
ZI
#8 x 1-1/4" Pan Head Screw (inserted)
12

1716RGBb Stonewood Queen Storage Bed
1726RGBb Stonewood King Storage Bed
1746RGBb Stonewood Queen Bed
1749RGBb Stonewood King Bed
Parts List
1716RGBb_1726RGBb_1746RGBb_1749RGBb
Page 4 — 03/17
1718RGBb Pedestal Kit (x2)
Part
Description
Quantity
Db
Pedestal
1
E
Small Drawer Box (assembled)
2
F
Large Drawer Box (assembled)
1
Gb
Small Drawer Face (attached)
2
Hb
Large Drawer Face (attached)
1
K
Left/Right Center Deckboard
1
L
Notched Deckboard (attached)
1
M
Assembled Foot (attached)
2
N
20" Drawer Slides (pre-installed sets)
3
O
#6 x 3/4" Philtruss Screw (inserted)
18
P
#6 x 1/2" Philtruss Screw (inserted)
18
Q
#8 x 7/8" Black Lo-Profile Screw (inserted)
20
R
#8 x 1-1/4" Black Screw
26
(18 inserted)
S
#8 x 1-5/8" Black Screw (inserted)
24
T
#8 x 2" Black Screw (inserted)
12
U
#8 x 1" Black Screw (inserted)
36
V
#8 x 1-1/2" Machine Screw Tuscan (installed)
3
W
#10 x 3/4" Pan Head Screw (inserted)
16
X
1/4" Flat Washer
4
ZA
1/4" x 1-1/2" Hex Bolt
4

1716RGBb Stonewood Queen Storage Bed
1726RGBb Stonewood King Storage Bed
1746RGBb Stonewood Queen Bed
1749RGBb Stonewood King Bed
Parts List
1716RGBb_1726RGBb_1746RGBb_1749RGBb
Page 5 — 03/17
1718RGBb Pedestal Kit (x2)_Cont.
Part
Description
Quantity
ZB
Knob (attached)
3
ZC
Knob Plate (attached)
3
ZD
Left Bed Bracket (attached)
2
ZE
Right Bed Bracket (attached)
2
ZF
Foot Bracket (attached)
4
ZG
Adjustable Glide (installed)
4
1748RGBb Queen Rail Kit (x1)
1740RGBb King Rail Kit (x1)
Part
Description
Quantity
1748RGBb
1740RGBb
R
#8 x 1-1/4" Black Screw
10
10
S
#8 x 1-5/8" Black Screw (inserted)
22
22
Y
1/4" T-Nut (inserted)
5
5
ZD
Left Bed Bracket (attached)
4
4
ZE
Right Bed Bracket (attached)
4
4
ZK
Queen Slat
5
0
ZL
King Slat
0
5
ZM
Assembled Foot
5
5
ZN
#6 x 3/4" Flat Head Screw (inserted)
32
32
ZO
Adjustable Glide with Hex Nut (installed)
5
5
ZP
5/16" x 3/4" Insert Nut (inserted)
5
5
ZQ
1/4" x 45mm Hanger Bolt (inserted)
5
5
ZS
Side Rail
2
2

1716RGBb Stonewood Queen Storage Bed
1726RGBb Stonewood King Storage Bed
1746RGBb Stonewood Queen Bed
1749RGBb Stonewood King Bed
Assembly Instructions
This assembly requires two people.
1716RGBb_1726RGBb_1746RGBb_1749RGBb
Page 6 — 03/17
Tools Required: Phillips screwdriver, Slotted screwdriver, 1/2" & 7/16" open end or box end
wrench and Tape measure
Notes:
Steps 1 through 10 are for the Stonewood Queen Storage Bed (#1716) and the Stonewood
King Storage Bed (#1726).
Steps 11 through 17 are for the Stonewood Queen Bed (#1746) and the Stonewood King Bed
(#1749).
Step 1 is for the the Stonewood King Storage Bed (#1726)
1. Remove the Center Deckboard (C) and King Trestles (J) from the back of the Headboard (Ab)
and place to the side. See Figures 1, 1a.
C
Fig. 1
Ab
Shipping Straps
Fig. 1a
C
J

1716RGBb Stonewood Queen Storage Bed
1726RGBb Stonewood King Storage Bed
1746RGBb Stonewood Queen Bed
1749RGBb Stonewood King Bed
Assembly Instructions
This assembly requires two people.
1716RGBb_1726RGBb_1746RGBb_1749RGBb
Page 7 — 03/17
2. Place both Pedestals (Db) approximately 63" apart for #1716 Queen Bed, or 79" apart for #1726
King Bed as shown in Figures 2 and 2a.
3. To attach the Footboard (Bb) to the Pedestal (Db), align the Brackets and slide the Pedestal
down on to the Footboard (Bb). See Figures 3 and 3a.
Fig. 3
Db
Bb
Fig. 3a
Fig. 2
63"
(For #1716
Queen)
Db
Fig. 2a
79"
(For #1726
King)
Db

1716RGBb Stonewood Queen Storage Bed
1726RGBb Stonewood King Storage Bed
1746RGBb Stonewood Queen Bed
1749RGBb Stonewood King Bed
Assembly Instructions
This assembly requires two people.
1716RGBb_1726RGBb_1746RGBb_1749RGBb
Page 8 — 03/17
4. Repeat step three for the other side. See Figures 4 and 4a.
5. Align the Brackets on both sides and slide the Pedestal/Footboard assembly down on to the
Headboard (Ab). See Figure 5.
Fig. 5
Ab
Fig. 4
Db
Fig. 4a

1716RGBb Stonewood Queen Storage Bed
1726RGBb Stonewood King Storage Bed
1746RGBb Stonewood Queen Bed
1749RGBb Stonewood King Bed
Assembly Instructions
This assembly requires two people.
1716RGBb_1726RGBb_1746RGBb_1749RGBb
Page 9 — 03/17
6. Open the drawers. Face the Footboard and stand in between the first and second braces.
Place a Queen Trestle with T-Nuts (I) or King Trestles with T-Nuts (J) on the outside surfaces of
the first upper left and right braces so that the T-Nuts (Y) sit near the top. See Figure 6a. Line up
the upper edges of the trestle and braces so they are nearly flush. Insert two 1/4" x 1-1/2" Hex
Bolts (ZA) and Washers (X) and tighten. Repeat for the second upper brace.
See Figures 6 and 6a.
Fig. 6
I or J
First brace
Second brace
Footboard
Headboard removed for illustration purposes.
Fig. 6a
X
Brace
ZA
X
x 4
x 4
ZA
I or J

1716RGBb Stonewood Queen Storage Bed
1726RGBb Stonewood King Storage Bed
1746RGBb Stonewood Queen Bed
1749RGBb Stonewood King Bed
Assembly Instructions
This assembly requires two people.
1716RGBb_1726RGBb_1746RGBb_1749RGBb
Page 10 — 03/17
7. Face the Headboard and stand in between the third and fourth braces. Place a Queen Trestle
with T-Nuts (I) or King Trestles with T-Nuts (J) on the outside surfaces of the third upper left and
right braces so that the T-Nuts (Y) sit near the top. See Figures 7 and 7a. Line up the upper
edges of the trestle and braces so they are nearly flush. Insert two 1/4" x 1-1/2" Hex Bolts (ZA)
and Washers (X) and tighten.
Repeat for the fourth braces.
Fig. 7
Fourth brace
Third brace
I or J
Fig. 7a
X
ZA
ZA
X
x 4
x 4
Brace
Trestle with T-Nuts (I or J)