Whittier Wood McKenzie 1099AFGACa User manual

P.O. Box 2827
Eugene, OR 97402 USA
Production Code:
VN 05/12
Model #
1099AFGACa; 1099AFCAFa
1-Drawer McKenzie Nightstand
AFGAC = Glazed Antique Cherry finish
AFCAF = Caffè finish
Assembly Instructions
Congratulations!
This fine piece of furniture will make a gorgeous addition to
your home. For the best results, read the Assembly
Instructions before you begin your project.
IMPORTANT NOTES:
•For normal household use only. Not recommended for
commercial use.
•Do not climb, sit or stand on this piece of furniture.
•Do not overload the drawer.
•Unload items before you move this unit.
•Before you load or move this unit, tighten all screws and
supports.
•Before you begin your project, completely read the
Assembly Instructions.
•Store this item: 1- in its box; 2- in a dry place; 3- in
temperatures that range from 40°F to 90°F (not on a cold
and possibly damp cement floor).
•Periodically inspect your furniture for any loose glue
joints, screws or any other problem that might affect the
stability of your furniture. Tighten or repair as needed.
DESIGN SUBJECT TO CHANGE WITHOUT NOTICE.
CALL US FIRST! Do not return this item to the store
Service Policy: We will replace any part that is defective,
missing or damaged during assembly. For a replacement
part, directly contact Whittier Wood Products customer
service department by phone, fax, mail or email.
Hours: Our friendly customer service staff can be reached
Monday-Friday 7:00 a.m. to 5:00 p.m. (Pacific Time). You
may leave a message 24 hours a day, seven days a week.
To Order: Provide the finish and furniture model number
(upper portion of this page), the part letter, production
code, quantity needed, reason for replacement and your
full name, address and telephone number.
Parts ship from our Eugene, Oregon factory within one or
two business days from the time we receive your request.
Please allow five to ten business days for delivery.
800-653-3336 • Outside the U.S. or Canada: 541-687-0213 • Fax: [phone]
www.whittierwood.com • P.O. Box 2827 • Eugene, Oregon 97402, U.S.A.

1099AFGACa; 1099AFCAFa 1-Drawer McKenzie Nightstand
Parts List
1099AFGACa_1099AFCAFa — Page 2 — 05/12
Please identify the parts and check that quantities received match those on this list.
If you need to replace a part, refer to the following letter and part name.
Part Description Quantity
A Top Assembly 1
Ba Case 1
C Drawer Box (inserted) 1
D Drawer Face (installed) 1
E Insert Nut (inserted) 4
F Small Adjustable Glide (installed) 4
G Knob (attached) 1
H #8 x 1-1/2" Machine Screw (installed) 1
I Drawer Slides (pre-installed sets) 1
J #6 x 1/2" Philtruss Screw (inserted) 6
K #6 x 3/4" Philtruss Screw (inserted) 6
L #8 x 7/8" Lo-Profile Screw (inserted) 4
M #8 x 1-1/4" Pan Head Screw (inserted) 3
O #8 x 1-3/8" Lo-Profile Screw (inserted) 7
Assembly Instructions
1. Place the unit at its final destination. Rotate the Small Adjustable Glides (F) on the bottoms of
the legs until the unit is level. See Figure 1.
Fig. 1
F F