Whittier Wood 1361GACf User manual

P.O. Box 2827
Eugene, OR 97402 USA
Production Code:
VN 08/17
Model #
1361GACf
1361CAFf
McKenzie Twin
Bookcase
Headboard
GAC = Glazed Antique Cherry finish
CAF = Caffè finish
Assembly Instructions
IMPORTANT NOTES:
•For normal household use only. Not recommended for commercial use.
•Unload items before you move this unit.
•Do not overload the concealed storage areas.
•Do not overload the cubbies.
•This assembly requires two people.
WARNING
Drilling, sawing, sanding or machining wood products can expose you to
wood dust, a substance known to the state of California to cause cancer.
Avoid inhaling wood dust or use a dust mask or other safeguards for
personal protection.
For more information go to: www.p65warnings.ca.gov/wood
This product can expose you to chemicals, including formaldehyde,
which are known to the State of California to cause cancer.
For more information go to: www.p65warnings.ca.gov/furniture
DESIGN SUBJECT TO CHANGE WITHOUT NOTICE.
CUSTOMER SERVICE
If you ever have questions about your furniture, please do not hesitate to contact us. In the unlikely event you need a
replacement part; we can make those parts available through an authorized Whittier Wood Furniture dealer. If you
cannot order replacement parts through your dealer, please contact our customer service department.
Hours: Our friendly customer service staff can be reached:
Monday-Friday 8:00 a.m. to 5:00 p.m. (Pacific Time).
You may leave a message 24 hours a day, seven days a week.
Customer Service: 800-653-3336 • Outside the U.S.: 541-687-0213
Fax: [phone]• Email: [email protected]
Thank you for allowing us to help you furnish your
home. We are certain you will be delighted with
your new furniture for many years to come.

1361GACf 1361CAFf McKenzie Twin Bookcase Headboard
Parts List
1361GACf_1361CAFf — Page 2 — 08/17
Please identify the parts and check that quantities received match those on this list.
If you need to replace a part, refer to the following letter and part name.
Part
Description
Quantity
B
Left Bracket (attached)
2
C
Right Bracket (attached)
2
D
#8 x 1" Black Screw (inserted)
16
Ed
Bookcase Headboard Assembly
1
F
Assembled Door (attached)
1
G
False Bottom
2
Ie
#8 x 7/8" Black Lo-Profile Screw (inserted)
4
J
Wire Clip Screw (attached)
3
K
Door Stay (attached)
1
L
#6 x 5/8" Undercut Screw ZN (inserted)
4
M
Door Stay Support (attached)
1
N
#6 x 1-1/4" Black Pan Head Screw (inserted)
3
O
Hinge (installed)
3
P
#6 x 5/8" Undercut Screw AB (inserted)
22
Q
Magnetic Catch Kit (attached)
2 sets
R
#6 x 5/8" Philtruss Screw (inserted)
9
S
Corner Brace (attached)
2
T
Large Adjustable Glide (installed)
2
U
#8 x 5/8" Pan Head Screw (inserted)
8
V
#8 x 1-1/4" Black Screw (inserted)
4
W
#8 x 2-1/4" Black Screw (inserted)
6
X
#8 x 1-1/4" Pan Head Screw (inserted)
4
XA
Top Assembly (attached)
1
XB
Power Bar and USB (installed)
1

1361GACf 1361CAFf McKenzie Twin Bookcase Headboard
Parts List
1361GACf_1361CAFf — Page 3 — 08/17
YA
Tack Glide (attached)
4
ZE
#14 x 1-1/4" Pan Head Screw
6
ZF
Washer
6
ZI
#8 x 1-3/8" Lo-Profile Screw (inserted)
6

1361GACf 1361CAFf McKenzie Twin Bookcase Headboard
Assembly Instructions
1361GACf_1361CAFf — Page 4 — 08/17
Tools Required: Drill, 1/8" bit, Phillips screwdriver, Slotted screwdriver
NOTE: Use this instruction and hardware kit included with this 1361 McKenzie Twin Bookcase
Headboard ONLY if you are using a Hollywood frame.
IF you are using this product with Whittier Wood Furniture Footboard and Pedestal kits,
disregard this instruction and hardware and use what is included with your Footboard kit.
1. Remove the metal brackets attached to the Headboard (Ed).
2. Adjust the Hollywood frame to fit your mattress and box spring.
3. Place the Headboard (Ed) against the end brackets of the frame and mark the locations for the
screws. Drill pilot holes approximately 1-1/4" deep. To make sure you don’t drill deeper,
measure 1-1/4" up from the end of the drill bit and wrap a piece of tape around the bit. Stop
drilling when the edge of the tape meets the wood.
4. Position the Headboard (Ed) against the frame and attach using six #14 x 1-1/4" Pan Head
Screws (ZE) and six Washers (ZF).
5. Place your bed in its final position. To level the headboard, reach behind the bookcase front legs
and, using a slotted screwdriver, find the Large Adjustable Glide (T). Using a slotted screw
driver, rotate the Large Adjustable Glides (T) clockwise until they bear weight.
See Figures 5, 5a and 5b.
This is important if the bookcase headboard sits upon a carpet tack strip.
Fig. 5
Fig. 5a
Fig. 5b
The top of the Large
Adjustable Glide (T) is
slotted.
T
S
Hollywood bed frame
removed for illustration
purposes.

1361GACf 1361CAFf McKenzie Twin Bookcase Headboard
Assembly Instructions
1361GACf_1361CAFf — Page 5 — 08/17
6. To adjust the brake tension on the Door Stay (K) turn the screw on the Door Stay clockwise to
loosen or counterclockwise to tighten. See Figures 6 and 6a.
7. Unwrap the False Bottoms (G) and place them on top of the rails in the Headboard Assembly
(Ed). Make sure the finger holes face forward as shown in Figure 7. After you have placed your
electronics inside the cubbies, use the Wire Clips (J) on the underside of the cubbies to secure
the wires. Close the door tightly making sure the magnetic catches and plates securely touch.
Fig. 7
Ed
F
G
G
K
L
o
o
s
e
n
T
i
g
h
t e
n
Fig. 6a
Fig. 6