Whittier Wood 2901AFGAC User manual

P.O. Box 2827
Eugene, OR 97402 USA
Outside U.S. or Canada: 541- 687- 0213Outside U.S. or Canada: 541- 687- 0213
800-653-3336800-653-3336
Fax: [phone] • Fax: [phone] • wwwwww.whittie.whittierrwood.comwood.com
Mail: P.O. Box 2827 • Eugene, Oregon 97402, U.S.AMail: P.O. Box 2827 • Eugene, Oregon 97402, U.S.A
For normal household use only.
recommended for commercial use.
Production Code:
V N
Service Policy: We will replace parts
which are defective, missing or damaged.
Please contact Whittier Wood Products
customer service department directly (by
phone, fax, mail or E-mail) for replacement
parts.
Hours: Our friendly customer service staff
can be reached Monday-Friday 7:00 a.m. to
5:00 p.m. (Pacific Time). A message can be
left 24 hours a day, 7 days a week.
To Order: Provide the complete furniture
model number, part letter, production code,
quantity needed, reason for replacement
and your full name and address along with
a telephone number in case we need to
contact you.
Parts ship from our Eugene, Oregon factory
within 1 or 2 business days from the time
we receive the request. Please allow 5-10
business days for delivery.
Unload items from this unit prior to moving.
Before loading or moving this unit, check all screws
and supports for tightness.
Store the item: 1) in the box; 2) in a dry place; 3) in
temperatures ranging from 40° to 90°. (Not on a cold,
possibly damp, cement floor.)
Inspect your furniture periodically for any loose glue
joints or screws, or any other problem which may be
affecting the stability of your furniture. Tighten or repair
as needed.
This Assembly requires two people.
DESIGN SUBJECT TO CHANGE WITHOUT NOTICE.
07/08
Congratulations!
This fine piece of furniture will make a handsome
addition to your home. For the best results, start
by reading the Assembly Instructions before you
begin your project.
Do not sit, stand or climb on this piece of furniture.
(Glazed Antique Cherry Finish)
Assembly Instructions
Model #
Kingswood
Plank Table
42"x 66"– 96"
2901AFGAC

Page 2 — 2901AFGAC — 07/08
A — Top Assembly — Qty. 1
F — Leaf Apron
— Qty. 4 (attached)
C — End Apron
— Qty. 2 (attached)
D — Left Front/Back Apron
— Qty. 2 (attached)
E — Right Front/Back Apron
— Qty. 2 (attached)
B — Leg — Qty. 4
2901AFGAC Kingswood Plank Table 42"x 66"– 96" — Parts List
Please identify the parts and check that quantities received match those on this list.
If you need to replace a part, refer to the following letter and model name.
I — Lever Lock — Qty. 6
J — Leveler Plate
— Qty. 6 (attached)
G — Brass Angle Brace
— Qty. 4 (attached)
(attached)
H— #10 x ¾" Brass Oval
Head Screw — Qty. 8 (inserted)
K — #6 x ⅝ " Brass Flat Head Screw
(for Lever Lock and Leveler Plate)
— Qty. 24 (inserted)
M — #6 x ⅝" Undercut Head
Screw — Qty. 16 (inserted)
ASSEMBLY
INSTRUCTIONS
TOOL REQUIRED:
9/16" Wrench
1. Place Top Assembly (A) upside-down on a clean, protected surface. Position Legs (B)
on Top Assembly (A) outside of and against the corners of the aprons. Insert 3/8" x 2½"
Hex Bolt (N) through Washer (O) and Bracket, and screw into Leg (B). Tighten bolts.
See Figure 1a. Turn your table upright.
Retighten bolts (N) after first week of use.
A
B
N
O
N
O
Fig. 1a
Fig. 1
L — Corner Bracket
— Qty. 4 (attached)
N — 3/8" x 2½" Hex Bolt
— Qty. 4
O — 5/16" Flat washer
— Qty. 4
P — Insert Nut
(inserted in Legs) — Qty. 4