Whittier Wood 1503GBCHb User manual

P.O. Box 2827
Eugene, OR 97402 USA
Production Code:
VN 05/13
Model #
1503GBCHb
Cascade Mirror
Glazed Black Cherry finish
Assembly Instructions
Congratulations!
This fine piece of furniture will make a gorgeous
addition to your home. For the best results, read the
Assembly Instructions before you begin your project.
IMPORTANT NOTES:
For normal household use only. Not recommended for
commercial use.
Handle the mirror with care. Glass is fragile.
Before you begin your project, completely read the
Assembly Instructions.
Store this item: 1- in its box; 2- in a dry place; 3- in
temperatures that range from 40°F to 90°F (not on a cold
and possibly damp cement floor).
Periodically inspect your furniture for any loose glue
joints, screws or any other problem that might affect the
stability of your furniture. Tighten or repair as needed.
DESIGN SUBJECT TO CHANGE WITHOUT NOTICE.
CALL US FIRST! Do not return this item to the store.
Service Policy: We will replace any part that is defective,
missing or damaged during assembly. For a replacement
part, directly contact Whittier Wood Products customer
service department by phone, fax, mail or email.
Hours: Our friendly customer service staff can be reached
Monday-Friday 7:00 a.m. to 5:00 p.m. (Pacific Time). You
may leave a message 24 hours a day, seven days a week.
To Order: Provide the finish and furniture model number
(upper portion of this page), the part letter, production
code, quantity needed, reason for replacement and your
full name, address and telephone number.
Parts ship from our Eugene, Oregon factory within one or
two business days from the time we receive your request.
Please allow five to ten business days for delivery.
800-653-3336 •Outside the U.S. or Canada: 541-687-0213 • Fax: [phone]
www.whittierwood.com • P.O. Box 2827 • Eugene, Oregon 97402, U.S.A.

1503GBCHb Cascade Mirror
Parts List
1503GBCHb —Page 2 —05/13
Please identify the parts and check that quantities received match those on this list.
If you need to replace a part, refer to the following letter and part name.
Part
Description
Quantity
Ab
Mirror Assembly
1
B
Top (attached)
1
Cb
Mirror Frame
1
D
Base (attached)
1
E
Mirror (attached)
1
Ha
Mirror Support
2
I
Mirror Wall Bracket
2
(1 attached)
J
Steel Brace (attached)
2
K
#6 x 3/4" Brass Flat Head Screw (inserted)
12
L
Turn Button (attached)
3
M
#6 x 5/8" Philtruss Screw (inserted)
12
N
#8 x 1-1/4" Pan Head Screw (inserted)
9
O
#8 x 1-3/4" Pan Head Screw
2
P
M4 x 41mm Machine Screw
4
Q
Pad Strip
3
R
#7 x 1-1/2" Black Pan Head Screw
4
S
Short Mirror Retainer (attached)
2
T
Long Mirror Retainer (attached)
1

1503GBCHb Cascade Mirror
Assembly Instructions
1503GBCHb —Page 3 —05/13
Tools Required: Phillips Screwdriver, Tape Measure, Pencil
You have the option of attaching your Mirror to the wall or to selected Dressers. To attach the Mirror
to a wall, follow steps 1-3. To attach the Mirror to a Dresser, follow steps 4-6.
1. Determine where you want the bottom of your mirror to end and draw a faint pencil line on the
wall. Using a tape measure, measure up 29-7/8" from that line. Draw another faint line. The top
line is where you will attach the Mirror Wall Bracket (I). If you like, you may erase the faint
bottom pencil mark. See Figure 1.
2. Locate two studs in the wall behind the space where you want to hang your Mirror. Affix the
Mirror Wall Bracket (I) to the studs with two #8 x 1-3/4" Pan Head Screws (O). If you cannot
locate two studs, purchase the proper wall attachment hardware for your type of wall and secure
the bracket. See Figure 2.
Fig. 1
Wall
29-7/8"
Fig. 2
Wall
I
O
x 1
x 2
I
O

1503GBCHb Cascade Mirror
Assembly Instructions
1503GBCHb —Page 4 —05/13
3. NOTE: The Mirror Wall Bracket (I) angles out at the top. When you hang your Mirror, the bracket
that is attached to the back of the Mirror fits over the angled part of the Mirror Wall Bracket (I).
See Figure 3.
4. Using the predrilled holes on the back of the Dresser as guides, attach the two Mirror Supports
(Ha) with four M4 x 41 Machine Screws (P). The upper screws will be inserted into the 3rd hole
from the top and the lower screws will be inserted into the 3rd hole from the bottom of the Mirror
Supports. See Figure 4 and 4a.
Ab
Wall
Stud
Mirror Wall Bracket (I)
(side view)
Wall
Mirror Wall
Brackets (I)
(back view)
Fig. 3
P
x 4
P
1153 Dresser
(Back view)
Ha
P
P
Fig. 4
3rd hole from the top
3rd hole from the bottom
Fig. 4a

1503GBCHb Cascade Mirror
Assembly Instructions
1503GBCHb —Page 5 —05/13
5. Peel off the backings on the Pad Strips (Q) and apply them to the bottom of the Mirror Assembly
(A). See Figure 5.
6. Place the Mirror on top of the Dresser and attach it to the Mirror Supports (F) with four
#7 x 1-1/2" Black Pan Head Screws (R). See Figure 6.
Fig. 6
R
R
R
x 4
Q
Q
Q