Whittier Wood 1200AFVCL User manual

P.O. Box 2827
Eugene, OR 97402 USA
Outside U.S. or Canada: 541- 687- 0213Outside U.S. or Canada: 541- 687- 0213
800-653-3336800-653-3336
Fax: [phone] • Fax: [phone] • wwwwww.whittie.whittierrwood.comwood.com
Mail: P.O. Box 2827 • Eugene, Oregon 97402, U.S.AMail: P.O. Box 2827 • Eugene, Oregon 97402, U.S.A
For normal household use only.
recommended for commercial use.
Congratulations!
Production Code:
(Candlelite Finish)
Assembly Instructions
Shaker
Bedroom Collection
VN
This fine piece of furniture will make a handsome
addition to your home.
Do not climb, sit or stand on this piece of
furniture.
Unload items from this unit prior to moving.
Before loading or moving this unit, check all screws
and supports for tightness.
For maximum stability, attach unit to the wall using
the enclosed hardware as per instructions.
Store the item: 1) in the box; 2) in a dry place; 3) in
temperatures ranging from 40° to 90°. (Not on a cold,
possibly damp, cement floor.)
Inspect your furniture periodically for any loose glue
joints or screws, or any other problem which may be
affecting the stability of your furniture. Tighten or repair
as needed.
DESIGN SUBJECT TO CHANGE WITHOUT NOTICE.
01/08
1200AFVCL
Small 3-Drawer
Shaker Nightstand
1226AFVCL
5-Drawer
Shaker Chest
1280AFVCL
6-Drawer
Shaker Chest
1227AFVCL
9-Drawer
Shaker Dresser
1228AFVCL
10-Drawer
Shaker Dresser
1281AFVCL
11-Drawer
Shaker Dresser
Shaker Nightstand
1201AFVCL
3-Drawer
Service Policy: We will replace parts which
are defective, missing or damaged. Please
contact Whittier Wood Products customer
service department directly (by phone, fax,
mail or E-mail) for replacement parts.
Hours: Our friendly customer service staff
can be reached Monday-Friday 7:00 a.m. to
5:00 p.m. (Pacific Time). A message can be
left 24 hours a day, 7 days a week.
To Order: Provide the complete furniture
model number, part letter, production code,
quantity needed, reason for replacement
and your full name and address along with
a telephone number in case we need to con-
tact you.
Parts ship from our Eugene, Oregon factory
within 1 or 2 business days from the time
we receive the request. Please allow 5-10
business days for delivery.

Shaker Bedroom Collection AFVCL
Parts List
HARDWARE
If you should need to replace a part please refer to the following list for part number.
Page 2 — 1200AFVCL - 1281AFVCL (01/08)
P – #8 x 1" Pan ScrewO – #8 x 2" Black Screw
M – Nylon Restraint Strap N – ClipL – Knob
1201AFVCL shown in above drawings.
Item No.
Small
Drawer Face
Medium
Drawer Face
Large
Drawer FaceDrawer Face
1200 & 1201 E NA. . ... NA NA
1226 — 1228 NA G
... NA H
1280 & 1281 NA I
... J K
Item No. Drawer
Small
Drawer
Medium
Drawer
Large
Drawer
1200 & 1201 C NA. . . . . NA
NA
NA
1226 — 1228 NA. . . . C D
1280 & 1281 NA. . . . C D E
Item No.
Small
Drawer Box*
Medium
Drawer Box*
Large
Drawer Box*Drawer Box*
1200 & 1201 D NA. . . . . NA NA
1226 — 1228 NA E. . . . NA F
1280 & 1281 NA F. . . . G H
* Does not include the Drawer Face
Top AssemblyItem No.
1200 — 1281AFVCL . . . . . A 1200 — 1281AFVCL . . . . . B
Case OnlyItem No.

TIPPING RESTRAINT
TO LEVEL THE UNIT:
O
O
N
N
N
M
P
P
1200AFVCL - 1281AFVCL (01/08) — Page 3
2. Position unit at desired location. Locate stud in the wall behind unit. Attach Clip (N) to wall stud with
two #8 x 2" Black Screw (O). See FIGURE 1. Attach second clip to unit with two #8 x 1" Pan Head
Screw (P). See FIGURE 2. Connect the two clips with Nylon Restraint Strap (M). See FIGURE 3A
AND 3B. Note: Wider units may require two tipping restraints.
If stud in wall cannot be located, purchase proper wall attachment hardware for your type of wall and
secure the unit.
1. Adjustable glides are attached to the bottom of the unit. Rotate glides until unit stands level.
Fig. 1
Fig. 2
Fig. 3B
Fig. 3A