Whittier Wood 2393GAC User manual

P.O. Box 2827
Eugene, OR 97402 USA
Production Code:
VN 05/17
Model #
2393GAC
2393CAF
McKenzie Cal-King
Petite Storage Bed
GAC = Glazed Antique Cherry finish
CAF = Caffè finish
Assembly Instructions
IMPORTANT NOTES:
•For normal household use only. Not recommended for commercial use.
•Unload items before you move this unit.
•Do not overload the drawers.
•This assembly requires two people.
WARNING
Drilling, sawing, sanding or machining wood products can expose you to
wood dust, a substance known to the state of California to cause cancer.
Avoid inhaling wood dust or use a dust mask or other safeguards for
personal protection.
For more information go to: www.p65warnings.ca.gov/wood
This product can expose you to chemicals, including formaldehyde,
which are known to the State of California to cause cancer.
For more information go to: www.p65warnings.ca.gov/furniture
DESIGN SUBJECT TO CHANGE WITHOUT NOTICE.
CUSTOMER SERVICE
If you ever have questions about your furniture, please do not hesitate to contact us. In the unlikely event you need a
replacement part; we can make those parts available through an authorized Whittier Wood Furniture dealer. If you
cannot order replacement parts through your dealer, please contact our customer service department.
Hours: Our friendly customer service staff can be reached:
Monday-Friday 8:00 a.m. to 5:00 p.m. (Pacific Time).
You may leave a message 24 hours a day, seven days a week.
Customer Service: 800-653-3336 • Outside the U.S.: 541-687-0213
Fax: [phone]• Email: [email protected]
Thank you for allowing us to help you furnish your
home. We are certain you will be delighted with
your new furniture for many years to come.

2393GAC 2393CAF McKenzie Cal-King Petite Storage Bed
Parts List
2393GAC_2393CAF — Page 2 — 05/17
Please identify the parts and check that quantities received match those on this list.
If you need to replace a part, refer to the following letter and part name.
2396GAC 2396CAF
Cal-King Petite Headboard/Footboard Kit (x1)
Part
Description
Quantity
A
Headboard Assembly
1
B
Footboard Assembly
1
O
#8 x 1-5/8" Black Screw (inserted)
4
Q
#8 x 1" Black Screw (inserted)
24
X
Small Left Bed Bracket (attached)
4
Y
Small Right Bed Bracket (attached)
4
ZD
#8 x 1-1/4" Pan Head Screw (inserted)
4
2395GAC 2395CAF
Cal-King Pedestal Kit (x2)
Part
Description
Quantity
C
Pedestal
1
D
Drawer Box (assembled)
3
E
Drawer Face (attached)
3
F
Notched Deckboard (attached)
1
G
Left/Right Center Deckboard
1
H
Cal-King Trestle With T-Nuts (36-1/4")
2
I
Assembled Foot
3
J
20" Drawer Slides (installed)
3 sets
K
#6 x 3/4" Philtruss Screw (inserted)
18

2393GAC 2393CAF McKenzie Cal-King Petite Storage Bed
Parts List
2393GAC_2393CAF — Page 3 — 05/17
2395GAC; 2395CAF
Cal-King Pedestal Kit (x2) Continued
Part
Description
Quantity
L
#6 x 1/2" Philtruss Screw
22
(18 inserted)
M
#8 x 7/8" Black Lo-Profile Screw (inserted)
18
N
#8 x 1-1/4" Black Screw
16
(8 inserted)
O
#8 x 1-5/8" Black Screw (inserted)
16
P
#8 x 2" Black Screw (inserted)
12
Q
#8 x 1" Black Screw (inserted)
32
R
#8 x 1-1/2" Machine Screw Tuscan (installed)
3
S
#10 x 3/4" Pan Head Screw (inserted)
12
T
1/4" Flat Washer
10
U
1/4" T-Nut (inserted)
10
V
1/4" x 1-1/2" Hex Bolt
10
W
Knob (attached)
3
X
Small Left Bed Bracket (attached)
2
Y
Small Right Bed Bracket (attached)
2
ZA
Foot Bracket (attached)
3
ZB
Adjustable Glide (installed)
3
ZC
90
o
Bracket
1

2393GAC 2393CAF McKenzie Cal-King Petite Storage Bed
Assembly Instructions
This assembly requires two people.
2393GAC_2393CAF — Page 4 — 05/17
Tools Required: Phillips screwdriver, 7/16" open end or box end wrench and Tape measure
1. Place both Pedestals (C) approximately 74" apart as shown in Figure 1.
2. To attach the Footboard (B) to the Pedestal (C), align the Brackets and slide the Pedestal down
on to the Footboard (B). See Figures 2 and 2a.
Fig. 2
C
B
Fig. 2a
Fig. 1
74"
C
C

2393GAC 2393CAF McKenzie Cal-King Petite Storage Bed
Assembly Instructions
This assembly requires two people.
2393GAC_2393CAF — Page 5 — 05/17
3. Repeat step three for the left side. See Figures 3 and 3a.
4. Align the Brackets on both sides and slide the Pedestal/Footboard assembly down on to the
Headboard (A). See Figure 4.
Fig. 4
A
Fig. 3
C
Fig. 3a

2393GAC 2393CAF McKenzie Cal-King Petite Storage Bed
Assembly Instructions
This assembly requires two people.
2393GAC_2393CAF — Page 6 — 05/17
5. Facing the Headboard open the drawers slightly as shown in figure 5. Attach an Assembled
Foot (I) to the bottom corner of the two braces closest to the Headboard on each pedestal using
two 1/4" x 1-1/2" Hex Bolts (V) and Washers (T) and tighten. See Figures 5, 5a, and 5b.
IMPORTANT: Make sure the Glides touch the floor and carry weight.
Fig. 5
Fig. 5a
T
V
T
V
x 8
x 8
I
Fig. 5b
T
V
I

2393GAC 2393CAF McKenzie Cal-King Petite Storage Bed
Assembly Instructions
This assembly requires two people.
2393GAC_2393CAF — Page 7 — 05/17
6. NOTE: There are blocks mounted on the backside of the Footboard to support the end of
the pedestal eliminating the need for an Assembled Foot in this position where it would
be easily visible. Do not attach an Assembled Foot in the position near the Footboard.
See Figure 6b.
Attach an Assembled Foot (I) to the bottom corner of the second brace from the Footboard on
each pedestal using two 1/4" x 1-1/2" Hex Bolts (V) and Washers (T) and tighten. See Figures
6, 6a and 6b.
IMPORTANT: Make sure the Glides touch the floor and carry weight.
Fig. 6
Fig. 6a
T
V
T
V
x 4
x 4
Headboard removed for illustration purposes.
Footboard
Footboard
Block
Fig. 6b
Pedestal

2393GAC 2393CAF McKenzie Cal-King Petite Storage Bed
Assembly Instructions
This assembly requires two people.
2393GAC_2393CAF — Page 8 — 05/17
7. Open the drawers. Face the Footboard and stand in between the first and second braces.
Place a Trestle with T-Nuts (H) on the outside surfaces of the first upper left and right braces so
that the T-Nuts (U) sit near the top. See Figure 7a. Line up the upper edges of the trestle and
braces so they are nearly flush. Insert two 1/4" x 1-1/2" Hex Bolts (V) and Washers (T) and
tighten. Repeat for the second upper brace. See Figures 7 and 7a.
Fig. 7
H
First brace
Second brace
Footboard
Headboard removed for illustration purposes.
Fig. 7a
T
Brace
T
V
x 4
x 4
V
H

2393GAC 2393CAF McKenzie Cal-King Petite Storage Bed
Assembly Instructions
This assembly requires two people.
2393GAC_2393CAF — Page 9 — 05/17
8. Face the Headboard and stand in between the third and fourth braces. Place a Trestle with
T-Nuts (H) on the outside surfaces of the third upper left and right braces so the T-nuts sit near
the top. See Figures 8 and 8a. Line up the upper edges of the trestle and braces so they are
nearly flush. Insert two 1/4" x 1-1/2" Hex Bolts (V) and Washers (T) and tighten.
Repeat for the fourth braces.
Fig. 8
Fourth brace
Third brace
H
Fig. 8a
T
Brace
Trestle with T-Nuts (H)
T
V
x 4
x 4
V

2393GAC 2393CAF McKenzie Cal-King Petite Storage Bed
Assembly Instructions
This assembly requires two people.
2393GAC_2393CAF — Page 10 — 05/17
9. Facing the Footboard, attach the Pedestal Assembly to the Footboard with a 90º Bracket (ZC)
and four #6 x 1/2" Philtruss Screws (L). Repeat for the other side. See Figures 9 and 9a.
Fig. 9
Fig. 9a
ZC
L
ZC
L
x 2
x 8

2393GAC 2393CAF McKenzie Cal-King Petite Storage Bed
Assembly Instructions
This assembly requires two people.
2393GAC_2393CAF — Page 11 — 05/17
10. To make sure the bed is square, measure the distance between opposing corners. If one of the
measurements is larger, tap on a footboard leg until the measurement is equal. See Figure 10.
11. Place the Left/Right Center Deckboards (G) as shown in Figure 11 and secure with
eight #8x1-1/4" Black Screws (N). There should be a small gap between each deckboard.
Fig. 11
N
N
x 16
G
Fig. 10