Whittier Wood 2386GAC User manual

P.O. Box 2827
Eugene, OR 97402 USA
Production Code:
VN 04/17
McKenzie Petite StorageBeds
GAC = Glazed Antique Cherry finish
CAF = Caffè finish
Assembly Instructions
Model #
IMPORTANT NOTES:
•For normal household use only. Not recommended for commercial use.
•Unload items before you move this unit.
•This assembly requires two people.
WARNING
Drilling, sawing, sanding or machining wood products can expose you to
wood dust, a substance known to the state of California to cause cancer.
Avoid inhaling wood dust or use a dust mask or other safeguards for
personal protection.
For more information go to: www.p65warnings.ca.gov/wood
This produc
t can expose you to chemicals, including formaldehyde,
which are known to the State of California to cause cancer.
For more information go to: www.p65warnings.ca.gov/furniture
DESIGN SUBJECT TO CHANGE WITHOUT NOTICE.
CUSTOMER SERVICE
If you ever have questions about your furniture, please do not hesitate to contact us. In the unlikely event you need a
replacement part; we can make those parts available through an authorized Whittier Wood Furniture dealer. If you
cannot order replacement parts through your dealer, please contact our customer service department.
Hours: Our friendly customer service staff can be reached:
Monday-Friday 8:00 a.m. to 5:00 p.m. (Pacific Time).
You may leave a message 24 hours a day, seven days a week.
Customer Service: 800-653-3336 • Outside the U.S.: 541-687-0213
Fax: [phone]• Email: [email protected]
2376GAC
2376CAF
McKenzie Queen Petite
Storage Bed
2386GAC
2386CAF
McKenzie King Petite
Storage Bed
Thank you for allowing us to help you furnish your
home. We are certain you will be delighted with
your new furniture for many years to come.

2376GAC 2376CAF McKenzie Queen Petite Storage Bed
2386GAC 2386CAF McKenzie King Petite Storage Bed
Parts List
2376GAC_2376CAF_2386GAC_2386CAF — Page 2 — 04/17
Please identify the parts and check that quantities received match those on this list.
If you need to replace a part, refer to the following letter and part name.
2379GAC 2379CAF
Queen Petite Headboard/Footboard Kit (x1)
Part
Description
Quantity
A
Headboard Assembly
1
B
Footboard Assembly
1
C
Queen Trestle With T-Nuts (24-3/8")
4
N
#6 x 1/2" Philtruss Screw
8
P
#8 x 1-1/4" Black Screw
16
Q
#8 x 1-5/8" Black Screw (inserted)
4
S
#8 x 1" Black Screw (inserted)
24
V
1/4" T-Nut (inserted)
8
X
Left Bed Bracket (attached)
4
Y
Right Bed Bracket (attached)
4
ZC
#8 x 1-1/4" Pan Head Screw (inserted)
4
ZD
1/4" Flat Washer
20
ZE
1/4" x 1-1/2" Hex Bolt
20
ZF
90
o
Bracket
2
Please note this Assembly Instruction is for either the McKenzie Queen Petite
Storage Bed (2376) or the McKenzie King Petite Storage Bed (2386).
The Parts list for each headboard follows on pages 2 and 3.

2376GAC 2376CAF McKenzie Queen Petite Storage Bed
2386GAC 2386CAF McKenzie King Petite Storage Bed
Parts List
2376GAC_2376CAF_2386GAC_2386CAF — Page 3 — 04/17
2389GAC 2389CAF
King Petite Headboard/Footboard Kit (x1)
Part
Description
Quantity
A
Headboard Assembly
1
B
Footboard Assembly
1
D
King Trestle With T-Nuts (40-1/2")
4
E
Center Deckboard
1
N
#6 x 1/2" Philtruss Screw
8
P
#8 x 1-1/4" Black Screw
28
Q
#8 x 1-5/8" Black Screw (inserted)
4
S
#8 x 1" Black Screw (inserted)
24
V
1/4" T-Nut (inserted)
8
X
Left Bed Bracket (attached)
4
Y
Right Bed Bracket (attached)
4
ZC
#8 x 1-1/4" Pan Head Screw (inserted)
4
ZD
1/4" Flat Washer
20
ZE
1/4" x 1-1/2" Hex Bolt
20
ZF
90
o
Bracket
2

2376GAC 2376CAF McKenzie Queen Petite Storage Bed
2386GAC 2386CAF McKenzie King Petite Storage Bed
Parts List
2376GAC_2376CAF_2386GAC_2386CAF — Page 4 — 04/17
2378GAC 2378CAF
Queen/King Pedestal Kit (x2)
Part
Description
Quantity
F
Pedestal
1
G
Drawer Box (assembled)
3
H
Drawer Face (attached)
3
I
Notched Deckboard (attached)
1
J
Left/Right Center Deckboard
1
K
Assembled Foot
3
L
20" Drawer Slides (installed)
3 sets
M
#6 x 3/4" Philtruss Screw (inserted)
18
N
#6 x 1/2" Philtruss Screw (inserted)
18
O
#8 x 7/8" Black Lo-Profile Screw (inserted)
18
P
#8 x 1-1/4" Black Screw (inserted)
8
Q
#8 x 1-5/8" Black Screw (inserted)
16
R
#8 x 2" Black Screw (inserted)
12
S
#8 x 1" Black Screw (inserted)
32
T
#8 x 1-1/2" Machine Screw Tuscan (installed)
3
U
#10 x 3/4" Pan Head Screw (inserted)
12
V
1/4" T-Nut (inserted)
6
W
Knob (attached)
3
X
Left Bed Bracket (attached)
2
Y
Right Bed Bracket (attached)
2
ZA
Foot Bracket (attached)
3
ZB
Adjustable Glide (installed)
3

2376GAC 2376CAF McKenzie Queen Petite Storage Bed
2386GAC 2386CAF McKenzie King Petite Storage Bed
Assembly Instructions
This assembly requires two people.
2376GAC_2376CAF_2386GAC_2386CAF — Page 5 — 04/17
Tools Required: Phillips screwdriver, 7/16" open end or box end wrench and Tape measure
1. Remove the Queen Trestles (C) from the back of the Headboard (A) and place to the side for
#2376 Queen Bed, or remove the Center Deckboard (E) and King Trestles (D) from the back of
the Headboard (A) and place to the side for #2386 King Bed. See Figures 1, or 1a and 1b.
C
Fig. 1
Shipping Straps
Fig. 1b
E
D
Shipping Straps
(For 2376)
(For 2386)
Fig. 1a
A
A
E

2376GAC 2376CAF McKenzie Queen Petite Storage Bed
2386GAC 2386CAF McKenzie King Petite Storage Bed
Assembly Instructions
This assembly requires two people.
2376GAC_2376CAF_2386GAC_2386CAF — Page 6 — 04/17
2. Place both Pedestals (F) approximately 63" apart for #2376 Queen Bed, or 79" apart for #2386
King Bed as shown in Figures 2 and 2a.
3. To attach the Footboard (B) to the Pedestal (F), align the Brackets and slide the Pedestal down
on to the Footboard (B). See Figures 3 and 3a.
Fig. 3
F
B
Fig. 3a
Fig. 2
F
63"
(For 2376)
F
Fig. 2a
79"
(For 2386)
F
F

2376GAC 2376CAF McKenzie Queen Petite Storage Bed
2386GAC 2386CAF McKenzie King Petite Storage Bed
Assembly Instructions
This assembly requires two people.
2376GAC_2376CAF_2386GAC_2386CAF — Page 7 — 04/17
4. Repeat step three for the left side. See Figures 4 and 4a.
5. Align the Brackets on both sides and slide the Pedestal/Footboard assembly down on to the
Headboard (A). See Figure 5.
Fig. 5
A
Fig. 4
F
Fig. 4a

2376GAC 2376CAF McKenzie Queen Petite Storage Bed
2386GAC 2386CAF McKenzie King Petite Storage Bed
Assembly Instructions
This assembly requires two people.
2376GAC_2376CAF_2386GAC_2386CAF — Page 8 — 04/17
6. Facing the Headboard open the drawers slightly as shown in figure 6. Attach an Assembled
Foot (K) to the bottom corner of the the two braces closest to the Headboard on each pedestal
using two 1/4" x 1-1/2" Hex Bolts (ZE) and Washers (ZD) and tighten. See Figures 6, 6a, and
6b.
IMPORTANT: Make sure the Glides touch the floor and carry weight.
Fig. 6
Fig. 6a
ZD
ZE
ZD
ZE
x 8
x 8
K
Fig. 6b
ZD
ZE
K

2376GAC 2376CAF McKenzie Queen Petite Storage Bed
2386GAC 2386CAF McKenzie King Petite Storage Bed
Assembly Instructions
This assembly requires two people.
2376GAC_2376CAF_2386GAC_2386CAF — Page 9 — 04/17
7. NOTE: There are blocks mounted on the back side of the Footboard to support the end of
the pedestal eliminating the need for an Assembled Foot in this position where it would
be easily visible. Do not attach and Assembled Foot in the position near the Footboard.
See Figure 7b.
Attach an Assembled Foot (K) to the bottom corner of the the second brace from the Footboard
on each pedestal using two 1/4" x 1-1/2" Hex Bolts (ZE) and Washers (ZD) and tighten. See
Figures 7,7a and 7b.
IMPORTANT: Make sure the Glides touch the floor and carry weight.
Fig. 7
Fig. 7a
ZD
ZE
ZD
ZE
x 4
x 4
Headboard removed for illustration purposes.
Footboard
Footboard
Block
Fig. 7b
Pedestal

2376GAC 2376CAF McKenzie Queen Petite Storage Bed
2386GAC 2386CAF McKenzie King Petite Storage Bed
Assembly Instructions
This assembly requires two people.
2376GAC_2376CAF_2386GAC_2386CAF — Page 10 — 04/17
8. Open the drawers. Face the Footboard and stand in between the first and second braces.
Place a Trestle with T-Nuts (C or D) on the outside surfaces of the first upper left and right
braces so that the T-Nuts (V) sit near the top. See Figure 8a. Line up the upper edges of the
trestle and braces so they are nearly flush. Insert two 1/4" x 1-1/2" Hex Bolts (ZE) and Washers
(ZD) and tighten. Repeat for the second upper brace. See Figures 8 and 8a.
Fig. 8
C or D
First brace
Second brace
Footboard
Headboard removed for illustration purposes.
Fig. 8a
ZD
Brace
ZD
ZE
x 4
x 4
ZE
C or D

2376GAC 2376CAF McKenzie Queen Petite Storage Bed
2386GAC 2386CAF McKenzie King Petite Storage Bed
Assembly Instructions
This assembly requires two people.
2376GAC_2376CAF_2386GAC_2386CAF — Page 11 — 04/17
9. Face the Headboard and stand in between the third and fourth braces. Place a Trestle with
T-Nuts (C/D) on the outside surfaces of the third upper left and right braces so the T-nuts sit
near the top. See Figures 9 and 9a. Line up the upper edges of the trestle and braces so they
are nearly flush. Insert two 1/4" x 1-1/2" Hex Bolts (ZE) and Washers (ZD) and tighten.
Repeat for the fourth braces.
Fig. 9
Fourth brace
Third brace
C or D
F
Fig. 9a
ZD
Brace
H
Trestle with T-Nuts (C/D)
ZD
ZE
x 4
x 4
ZE

2376GAC 2376CAF McKenzie Queen Petite Storage Bed
2386GAC 2386CAF McKenzie King Petite Storage Bed
Assembly Instructions
This assembly requires two people.
2376GAC_2376CAF_2386GAC_2386CAF — Page 12 — 04/17
10. Facing the Footboard, attach the Pedestal Assembly to the Footboard with a 90º Bracket (ZF)
and four #6 x 1/2" Philtruss Screws (N). Repeat for the other side. See Figures 10 and 10a.
Fig. 10
Fig. 10a
ZF
N
ZF
N
x 2
x 8

2376GAC 2376CAF McKenzie Queen Petite Storage Bed
2386GAC 2386CAF McKenzie King Petite Storage Bed
Assembly Instructions
This assembly requires two people.
2376GAC_2376CAF_2386GAC_2386CAF — Page 13 — 04/17
11. To make sure the bed is square, measure the distance between opposing corners. If one of the
measurements is larger, tap on a footboard leg until the measurement is equal. See Figure 11.
12. Place the Left/Right Center Deckboards (J) as shown in Figure 12 and secure with
eight #8x1-1/4" Black Screws (P). There should be a small gap between each deckboard.
Step 13 is for the McKenzie King Petite Storage Bed (#2386)
Fig. 12
P
P
x 16
J
Fig. 11

2376GAC 2376CAF McKenzie Queen Petite Storage Bed
2386GAC 2386CAF McKenzie King Petite Storage Bed
Assembly Instructions
This assembly requires two people.
2376GAC_2376CAF_2386GAC_2386CAF — Page 14 — 04/17
13. Place the Center Deckboard (E) as shown in Figure 13 and secure with twelve #8 x 1-1/4" Black
Screws (P). If you need to adjust the center feet, remove the Center Deckboard, adjust the
glides and reattach the deckboard.
Fig. 13
P
E
P
x 12